Plumbing 3 Quiz

47 Questions | By Drey081913 | Updated: May 10, 2018 | Attempts: 129

Quiz Flashcard

Questions

Feedback

During the Quiz End of Quiz

Difficulty

Easy First Hard First Sequential

1/47 Questions

A device for regulating the supply of water in a flush tank by means of hallow floating ball which by its rise or fall shuts or opens a supply valve.
- A. Ball Cock
- B. Compression Cock
- C. Key Cock
- D. Self-closing Cock

About This Quiz

Plumbing is a practical skill that is needed in different places. Without proper plumbing, the environment can be in disarray. This is why it’s important to be well informed as a practitioner. Take the test below and see how well informed are you on the tools you use or plan to use on the daily.

Quiz Preview

Quiz Review Timeline (Updated): May 10, 2018 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

Current Version
May 10, 2018

Quiz Edited by
ProProfs Editorial Team
Sep 21, 2014

Quiz Created by
Drey081913

Recent Quizzes

Plumbing Tools And Rules! Trivia Quiz

A beautiful home craves for perfect plumbing solution when it comes to clogging of dirt in basins, leakage in pipes, draining of unnecessary filthy materials and so...

Questions: 10 | Attempts: 1079 | Last updated: Mar 21, 2023

Sample Question
Your kitchen faucet is dripping from the spout. What is it you need to fix?

Change the whole faucet

Change the faucet stems (valves)

Change the spout

Change the washers (or seats/springs if washerless type)

Change the O-rings in the spout

Plumbing: Master Plumber Exam! Trivia Questions Quiz

This trivia questions quiz is on Plumbing in preparation for the Master Plumber Exam! It is made up of hard to answer questions from past exams and is designed to give you an...

Questions: 189 | Attempts: 2464 | Last updated: Mar 21, 2023

Sample Question
The minimum area of any vent installed in a CW & VS shall be at least _______ the inside cross-sectional area of the drainpipe served.

1/2

1/4

Twice

3/4

Basic Plumbing Principle Trivia Quiz

Explore the Basic Plumbing Principle trivia quiz to understand key regulations and principles guiding plumbing practices in the Philippines, established since 18 June 1955. This...

Questions: 50 | Attempts: 1041 | Last updated: Mar 22, 2023

Sample Question
The Plumbing Law of the Philippines was approved on

18 June 1955

21 June 1955

19 June 1956

16 June 1955

Plumbing Code Trivia Quiz! Test

Plumbing Code Trivia Quiz! Test your knowledge of key plumbing principles, installation requirements, and plumbing fixtures. This quiz assesses understanding of plumbing codes,...

Questions: 10 | Attempts: 981 | Last updated: Mar 21, 2023

Sample Question
Plumbing shall be installed by Registered Master Plumbers with due regard to the preservation of the strength of structural members and the prevention of damage to walls and other surfaces through fixture usage.

Principle No. 19

Principle No. 20

Principle No. 21

Principle No. 22

National Plumbing Code Of The Philippines, Revised Edition (1999) Part 2

This quiz assesses knowledge of the WSFU values for various plumbing fixtures as defined in the National Plumbing Code of the Philippines, Revised edition (1999). It covers both...

Questions: 100 | Attempts: 807 | Last updated: Jun 27, 2024

Sample Question
WSFU of bar sink, drinking fountain and lavatory?

1

2

3

4

Master Plumber Pre-board Exam Part 2

This Master Plumber Pre-board Exam part 2 assesses essential skills in plumbing, focusing on tools, installation techniques, and code compliance. It is designed for individuals...

Questions: 100 | Attempts: 4064 | Last updated: Sep 01, 2024

Sample Question
A tool used to make watertight joints between flexible copper tubing and fitting or valve.

Flaring tool

Pipe vise

Yoke vise

Pipe extractor

Back to top

Plumbing 3 Quiz

A device for regulating the supply of water in a flush tank by means of hallow floating ball which by its rise or fall shuts or opens a supply valve.

Quiz Preview

59. Water from laundries, wash basins, sinks, shower, and bathtub.

Sediment that settles out of sewage, forming a semi-solid mass on the bottom of a septic tank

The minimum distance (in meters) of well from a septic tank

The length of a pipeline measured along the center lone of the pipe and pipe fittings.

A 180 degree bend in a pipe.

These are fixtures that are installed in janitor’s closets and building maintenance areas for use by the building maintenance personnel.

A pipe fitting to change in one single direction (course) the following of water:

In N. P. C. P. – it is the lowest portion of the interior part of any pipe or conduit that is not vertical

15. In N. P. C. P. – it is the law of the plumbing practice in the Philippines.

One of the first steps in the selection of a suitable water supply source is:

The minimum soil pipe size for a water closet:

. The clear vertical distance between the spout of a faucet or other supply pipe and the flood level of a receptacle.

69. A Piece of pipe lesser than 12” length / threaded on both ends.

. An outlet, pipe, or receptacle for excess liquid.

Prevents water hammer:

The quality of Galvanized Iron pipes are rated by:

How many gallons do an average daily consumption of a Bathtub?

The septic tank has a total volume of 6.48 cum, what should be the required volume of its leaching chamber?

Location of cleanouts should be place at every ________ run of horizontal soil or waste piping.

15. In N. P. C. P. – a pipe connected from building gutter to the downspout or conductor.

. Theaters or movie houses’ water requirement is determined or estimated at 5 gallons of water per day per

Minimum fixture drains size for Water Closets.

Liquid sewage that has been treated in a septic tank or sewage treatment plant

15. In N. P. C. P. – is the top edge of a receptacle from where water overflows

A rigid type of pipe known to have a good chemical resistance, excellent impact strength, especially at low temperatures and maintains rigidity at high temperatures. (black / gray pipe)

. A valve that supplies a fixed quantity of water to fixtures for flushing purposes when actuated by direct water pressure.

15. In the N. P. C. P. – it is a metallic sleeve caulked or joined to an opening in a piping into which a plug is screwed that can be removed for cleaning the interior of the pipe.

A flange that closed the end of a pipe. There is no opening for the passage of water.

15. In N. P. C. P. – it is a device, which discharges a predetermined quantity of water into fixtures for flushing purposes and is activated by direct water pressure.

A flexible type of pipe known to have the only flexible plastic tubing suitable for use with hot and color water pressure system. And it also known as an excellent chemical resistance to acids and alkalis but is not suited for fuel oil, gasoline or kerosene distribution system. (blue or gray pipe)

15. In N. P. C. P. – individual vent is pipe installed to vent a fixture trap & which connects with the vent system above the fixture served or terminates in the open air. A term I. P. S. means _______________

. A coupling device for connecting 2 pipes neither of which can be turned, consisting of two internally threaded end piece which are tightened around the pipes ends to be joined, and an externally threaded center piece, which draws the two end pieces together as it is rotated.

Fluoride as additive in water supply is a chemical for:

15. Common source of potable water in some rural areas

. A type of private sewage disposal that has a vault constructed of concrete for the collection or raw sewage and a wooden shelter.

86. A pit or reservoir serving as a drain or receptacle for water or other liquids.

64. A device installed in piping to prevent the reverse flow of storm or sewage into the drainage system ot their branches.

A flexible type pipe that is excellent in chemical and crush resistance has impact strength and flexibility and good low temperature performance. (black-bluish pipe)

15. In N. P. C. P., a tank located above or integral with water closet, urinal or similar fixtures for flushing or removing excrements in the fixture

Faucet fitted with nozzle curving downward used as a draw-off tap:

The reference in measuring the depth of a trap seal of the trap:

To cause water or other liquid to percolate through something, so as to dissolve out soluble constituents.

. The part of a vent line which connects directly with an individual trap underneath or behind the fixture and extends to the branch or main pipe at and point higher than the fixture trap:

61. Minimum fixture drains size for a Bathtub

15. Assuming the waste pipe of a fixture is 50 mm, what should be the size of its vent pipe?