Contractor Safety Management Quiz

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
Learn about Our Editorial Process
| By Ashutosh
A
Ashutosh
Community Contributor
Quizzes Created: 1 | Total Attempts: 544
Questions: 15 | Attempts: 551
SettingsSettingsSettings
Please wait...
Create your own Quiz
Contractor Safety Management Quiz - Quiz

Questions and Answers
  • 1. 

    Which PQ score is required for High risk contact at Tata Motors

    • A.

      >=85%

    • B.

      >=65%

    • C.

      >=75%

    • D.

      >=60%

    Correct Answer
    A. >=85%
    Explanation
    A PQ score of >=85% is required for a high-risk contact at Tata Motors. This indicates that the individual must score at least 85% on the PQ assessment to be considered a high-risk contact.

    Rate this question:

  • 2. 

    PQ score for other than high risk contractor is:

    • A.

      No score

    • B.

      >=65%

    • C.

      >=50%

    • D.

      >=75%

    Correct Answer
    B. >=65%
    Explanation
    The given answer suggests that for contractors who are not classified as high risk, there is no score assigned. However, if their PQ score is greater than or equal to 65%, they are considered to have a satisfactory performance.

    Rate this question:

  • 3. 

    The first three steps of the six step CSM process are :

    • A.

      Contract enquiry – PQ Score – Contract award

    • B.

      Contractor selection – Contract preparation- Contract award

    • C.

      Contract enquiry – Receipt of offer – Negotiation

    • D.

      PQ score – contractor selection – awarding contractor

    Correct Answer
    B. Contractor selection – Contract preparation- Contract award
    Explanation
    The correct answer is "Contractor selection - Contract preparation - Contract award." This is because the first three steps mentioned in the given options are "Contractor selection," "Contract preparation," and "Contract award."

    Rate this question:

  • 4. 

    Last three steps of the six step CSM process are

    • A.

      Making gate pass – Basic training – Regular work

    • B.

      All trainings- Regular work- Audit of work done

    • C.

      Orientation &Training- Managing the work- Periodic evaluation

    • D.

      Medical test – Training – Starting work

    Correct Answer
    C. Orientation &Training- Managing the work- Periodic evaluation
    Explanation
    The correct answer is "Orientation & Training- Managing the work- Periodic evaluation." This sequence of steps makes logical sense in the context of a process. Orientation and training are typically the first steps in introducing new employees to their roles and responsibilities. Once they have been trained, they can then begin managing their work independently. Periodic evaluation is the final step in assessing their performance and ensuring that they are meeting expectations.

    Rate this question:

  • 5. 

    Contractor has to give certification of understanding of safety requirement on contractor's letter head

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
    Explanation
    The given statement is true because it states that the contractor must provide a certification of understanding of safety requirements on their letterhead. This implies that the contractor needs to acknowledge and demonstrate their comprehension of safety protocols and regulations in writing, which helps ensure that they are aware of and will adhere to the necessary safety measures.

    Rate this question:

  • 6. 

    The contractual employees basic safety training is required to be completed

    • A.

      Within a weeks’ time of making the gate pass

    • B.

      Before making gate pass

    • C.

      After knowing the work

    • D.

      Whenever there is no work

    Correct Answer
    B. Before making gate pass
    Explanation
    The correct answer is "Before making gate pass." This means that the contractual employees must complete their basic safety training before they are allowed to make a gate pass. This ensures that they have the necessary knowledge and skills to work safely and minimize any potential risks or accidents. By completing the training beforehand, it helps to prioritize safety and ensures that all necessary precautions are taken before starting any work.

    Rate this question:

  • 7. 

    If contractual employees are to work at height they need to undergo

    • A.

      Pressure Test

    • B.

      Vertigo Test

    • C.

      Eye test

    • D.

      Height Test

    Correct Answer
    B. Vertigo Test
    Explanation
    Contractual employees who are required to work at height may need to undergo a vertigo test. This is because working at heights can cause dizziness and loss of balance, which are symptoms of vertigo. By conducting a vertigo test, employers can ensure that their employees do not have any underlying balance or inner ear issues that could put them at risk while working at heights. This test helps to identify individuals who may be prone to vertigo and take necessary precautions to prevent accidents or injuries.

    Rate this question:

  • 8. 

    The implementation of six step process of Contractor safety Management is the responsibility of

    • A.

      FCA

    • B.

      DCA

    • C.

      Safety Head

    • D.

      Head contract Cell

    Correct Answer
    A. FCA
    Explanation
    The correct answer is FCA. FCA stands for Field Contract Administrator, who is responsible for implementing the six-step process of Contractor Safety Management. This process involves various activities such as pre-qualification of contractors, conducting safety audits, ensuring compliance with safety regulations, and monitoring contractor performance. The FCA plays a crucial role in managing the safety of contractors and ensuring that they adhere to safety standards and guidelines.

    Rate this question:

  • 9. 

    Near miss registration is required to be maintained by the contractor. All near miss observations by contractors are required to be entered in TML safety portal. This is to be done by:

    • A.

      FCA

    • B.

      DCA

    • C.

      Concerned area in charge

    • D.

      Any one of the above

    Correct Answer
    D. Any one of the above
    Explanation
    The correct answer is "Any one of the above." This means that the responsibility of entering near miss observations in the TML safety portal can be assigned to either the FCA (Field Control Administrator), the DCA (Deputy Control Administrator), or the concerned area in charge. This flexibility allows for multiple individuals to be responsible for maintaining the near miss registration, ensuring that it is properly documented and addressed.

    Rate this question:

  • 10. 

    The severity index of a good citizen according to CSM is

    • A.

      0

    • B.

      1

    • C.

      2

    • D.

      3

    Correct Answer
    A. 0
    Explanation
    The severity index of a good citizen according to CSM is 0. This means that a good citizen is not associated with any severity index. They are not involved in any negative or harmful activities that could be considered severe. A severity index of 0 indicates that the individual is responsible, law-abiding, and respectful towards others, making them a model citizen.

    Rate this question:

  • 11. 

    The severity index rating of Rule for procedure resolution in CFSA is

    • A.

      2

    • B.

      3

    • C.

      7

    • D.

      5

    Correct Answer
    B. 3
    Explanation
    The severity index rating of Rule for procedure resolution in CFSA is 3. This suggests that the rule for procedure resolution in CFSA is moderately severe.

    Rate this question:

  • 12. 

    The severity index ratio for imminent danger that may cause fatality is

    • A.

      1

    • B.

      3

    • C.

      5

    • D.

      7

    Correct Answer
    C. 5
    Explanation
    The severity index ratio for imminent danger that may cause fatality is 5. This suggests that the danger is moderately severe and has a significant potential to cause harm or even lead to death. It is important to take immediate action to mitigate the risk and ensure the safety of individuals involved.

    Rate this question:

  • 13. 

    Any deviation to CSM process should be initiated by

    • A.

      FCA

    • B.

      DCA

    • C.

      FCA and DCA

    • D.

      FCA, DCA and safety officer from that area

    Correct Answer
    C. FCA and DCA
    Explanation
    The correct answer is FCA and DCA. This means that any deviation to the CSM (Controlled Substances Management) process should only be initiated by the FCA (Facility Change Authorization) and DCA (Document Change Authorization) personnel. These individuals are responsible for ensuring that any changes or modifications to the CSM process are properly authorized and documented. The involvement of the safety officer from that area may also be necessary in certain cases to ensure that the proposed deviation does not compromise safety standards.

    Rate this question:

  • 14. 

    Any deviation is required to be authorised by

    • A.

      Plant head

    • B.

      Safety head

    • C.

      Legal head

    • D.

      All of the above

    Correct Answer
    D. All of the above
    Explanation
    Any deviation from standard procedures or protocols should be authorized by the relevant authorities to ensure safety and compliance. In this case, the question states that any deviation is required to be authorized by the plant head, safety head, or legal head. This means that all three individuals have the authority to approve any deviations, emphasizing the importance of involving multiple stakeholders to ensure the highest level of safety and legal compliance.

    Rate this question:

  • 15. 

    CFSA (Contractors Field Safety Audit) is required to be carried out on registered site in the system

    • A.

      Once a week

    • B.

      Once a Month

    • C.

      When there is an unsafe practice

    • D.

      All of the above

    Correct Answer
    A. Once a week
    Explanation
    The correct answer is "Once a week" because CFSA is a safety audit that needs to be conducted regularly to ensure that contractors are following safety protocols and practices on the registered site. Conducting the audit once a week allows for frequent monitoring and identification of any potential unsafe practices or hazards, ensuring a safer work environment for everyone involved.

    Rate this question:

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Jul 12, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • Mar 30, 2019
    Quiz Created by
    Ashutosh

Related Topics

Recent Quizzes

How Sustainable is Your Management Style? Take the Quiz and Find Out! How Sustainable is Your Management Style? Take the Quiz and Find Out!
Am I A Good Manager? Am I A Good Manager?
Making Informed Decisions Quiz Making Informed Decisions Quiz
Crop Production and Management Class 8 MCQ Questions with Answers Crop Production and Management Class 8 MCQ Questions with Answers
Conflict Management Styles Assessment Conflict Management Styles Assessment
Management Information Systems Test - 1 Management Information Systems Test - 1
Ch-1 QUIZ 2 FINANCIAL management Ch-1 QUIZ 2 FINANCIAL management
Principle of Management Quiz 1 BBA II A (June 11, 2020) Principle of Management Quiz 1 BBA II A (June 11, 2020)
3.1 SAP S/4HANA for Management Accounting Associates Certification 3.1 SAP S/4HANA for Management Accounting Associates Certification

Featured Quizzes

Which Sonic Character Are You Quiz? Which Sonic Character Are You Quiz?
Maths Quiz For Grade 6 With Answers Maths Quiz For Grade 6 With Answers
Past Life Quiz: Who Was I In My Past Life? Past Life Quiz: Who Was I In My Past Life?
What Is My Talent? Quiz What Is My Talent? Quiz
Are You Smarter Than A 5th Grader? MCQ Quiz Questions Are You Smarter Than A 5th Grader? MCQ Quiz Questions
Articles Quiz With Answers Articles Quiz With Answers

Popular Topics

+ Show more
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.