National Safety Month Online Quiz #1

2.

In TML every regular shop floor activity shall be risk assessed using

HAZCOM
HIRA
HAZOP
JSA

Correct Answer

A. HIRA

Explanation

HIRA stands for Hazard Identification and Risk Assessment. In TML (presumably referring to a specific organization or industry), it is required to conduct risk assessments for every regular shop floor activity. HIRA involves identifying potential hazards, evaluating the associated risks, and implementing appropriate control measures to mitigate those risks. This process helps ensure the safety of workers and minimize the likelihood of accidents or incidents occurring in the workplace.

Rate this question:

3.

All injuries and occupational illnesses are

Inevitable
Preventable
Acceptable
All the above

Correct Answer

A. Preventable

Explanation

The correct answer is "Preventable" because injuries and occupational illnesses can be avoided or reduced by implementing proper safety measures, providing training and education to employees, and promoting a culture of safety in the workplace. While it may not be possible to completely eliminate all risks, proactive measures can significantly reduce the likelihood of injuries and illnesses occurring. Therefore, it is important to prioritize prevention strategies to ensure the well-being and safety of workers.

Rate this question:

4.

OSHA recommends evacuation warden for every

10 employee
20 employee
50 employee
100 employee

Correct Answer

A. 20 employee

Explanation

OSHA recommends having an evacuation warden for every 20 employees. This means that for every 20 individuals in a workplace, there should be a designated person responsible for ensuring the safe evacuation of employees in case of an emergency. Having an evacuation warden helps to ensure that there is someone trained and prepared to guide and assist employees during evacuations, increasing the overall safety and effectiveness of emergency procedures.

Rate this question:

5.

Oxygen cylinders must be stored away from highly flammable material by

100 feet
20 feet
A steel wall
80 feet

Correct Answer

A. 20 feet

Explanation

Oxygen cylinders must be stored away from highly flammable material by at least 20 feet to ensure safety. This distance helps to minimize the risk of fire or explosion in case of a leak or accidental release of oxygen. Storing the cylinders at a safe distance reduces the chances of ignition and allows for better ventilation, reducing the concentration of oxygen in the surrounding area.

Rate this question:

6.

No license is required for LPG filling and possession, if

Total quantity of gas does not exceed 1000 kg at a time
Total quantity of gas does not exceed 250 kg at a time
Total quantity of gas does not exceed 100 kg at a time
Total quantity of gas does not exceed 2500 kg at a time

Correct Answer

A. Total quantity of gas does not exceed 100 kg at a time

Explanation

No license is required for LPG filling and possession if the total quantity of gas does not exceed 100 kg at a time. This means that individuals or businesses can freely fill and possess LPG without the need for a license as long as the quantity does not exceed this limit. It is important to note that this regulation may vary in different jurisdictions, so it is always advisable to check the specific rules and regulations in the relevant area.

Rate this question:

7.

‘Isolation’ by LOTO definition includes:

Separation of the equipment, machinery etc from sources of hazardous energy or material
Using a method such that only a conscious and deliberate act can restore the connection
Both are correct
None of the above

Correct Answer

A. Both are correct

Explanation

The correct answer is that both statements are correct. The definition of isolation by LOTO (Lockout/Tagout) includes both the separation of equipment from sources of hazardous energy or material and the use of a method that requires a conscious and deliberate act to restore the connection. This ensures that the equipment is effectively isolated and prevents any accidental or unauthorized reconnection.

Rate this question:

8.

The operator shall not pick up a load through a hoist in excess of

85% of its SWL
75% of its SWL.
90% of its SWL.
100% its SWL.

Correct Answer

A. 85% of its SWL

Explanation

The correct answer is 85% of its SWL. This means that the operator should not pick up a load through a hoist that exceeds 85% of its Safe Working Load (SWL). This is important because exceeding the SWL can put excessive stress on the hoist and potentially cause it to fail, leading to accidents and injuries. By adhering to this limit, the operator ensures the safe and efficient operation of the hoist while also protecting themselves and others from potential harm.

Rate this question:

9.

________ is/are Pro active component/s to work safely

Reporting accidents
Recommendation for incidents
PPE
Assessing exposure risks

Correct Answer

A. Assessing exposure risks

Explanation

Assessing exposure risks is a proactive component to work safely because it involves identifying and evaluating potential hazards and risks in the work environment. By assessing exposure risks, employers can implement appropriate control measures to minimize or eliminate the risks, ensuring the safety and well-being of workers. This proactive approach helps prevent accidents and incidents before they occur, promoting a safe working environment. Reporting accidents, recommending incidents, and using personal protective equipment (PPE) are also important safety measures, but they are reactive rather than proactive in nature.

Rate this question:

10.

HIPO means

High Incident Potential Occurrence
High Potential Incident
Highest Incident Process Organization
None of the above

Correct Answer

A. High Potential Incident

Explanation

HIPO stands for High Potential Incident. This term is commonly used in safety management to refer to incidents or situations that have a high potential for causing harm or damage. It is important to identify and address high potential incidents in order to prevent accidents and ensure the safety of individuals and the organization.

Rate this question:

11.

The maximum temperature in which any gas cylinders can be used or stored

70 degree F
100 degree F
125 degree F
150 degree F

Correct Answer

A. 125 degree F

Explanation

The correct answer is 125 degree F. This is the maximum temperature at which any gas cylinders can be used or stored. Exceeding this temperature can lead to the risk of explosion or leakage of the gas, which can be hazardous. Therefore, it is important to ensure that gas cylinders are stored and used within the specified temperature limits to maintain safety.

Rate this question:

12.

Which is the most preferred hazard control method for the best practice of safety?

Substitution
Administrative controls
Engineering controls
Wearing PPE

Correct Answer

A. Substitution

Explanation

Substitution is the most preferred hazard control method for the best practice of safety because it involves replacing a hazardous substance, process, or equipment with a less hazardous alternative. This method eliminates or reduces the risk at its source, making it the most effective way to control hazards. By substituting a hazardous material with a safer one or replacing a hazardous process with a safer one, the overall risk to workers' health and safety is significantly reduced. This approach prioritizes prevention and long-term risk reduction, making it the preferred method for ensuring safety in the workplace.

Rate this question:

National Safety Month Online Quiz #1

If i see an accident at work, i should

Quiz Preview

In TML every regular shop floor activity shall be risk assessed using

All injuries and occupational illnesses are

OSHA recommends evacuation warden for every

Oxygen cylinders must be stored away from highly flammable material by

No license is required for LPG filling and possession, if

‘Isolation’ by LOTO definition includes:

The operator shall not pick up a load through a hoist in excess of

________ is/are Pro active component/s to work safely

HIPO means

The maximum temperature in which any gas cylinders can be used or stored

Which is the most preferred hazard control method for the best practice of safety?