What Do You Know About Mining Safety?

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
Learn about Our Editorial Process
| By AdewumiKoju
A
AdewumiKoju
Community Contributor
Quizzes Created: 810 | Total Attempts: 1,017,985
Questions: 10 | Attempts: 398

SettingsSettingsSettings
What Do You Know About Mining Safety? - Quiz

Safety has always been a big concern when it comes to mining operations. There a lot of recorded deaths in the last century alone because of poor safety precautions and guidelines. As mining is a major way of getting essential natural resources, it is important for workers to have confidence in safety guidelines and precautions that will save a lot of lives. Do you know much about these guidelines? Or the history of mining safety? One way to test your knowledge is to take this quiz by clicking on the blue 'Take the Quiz' button.


Questions and Answers
  • 1. 

    What year is regarded as the deadliest year in the history of coal mining?

    • A.

      1904

    • B.

      1898

    • C.

      1907

    • D.

      1910

    Correct Answer
    C. 1907
    Explanation
    In 1907, the deadliest year in the history of coal mining occurred. This year is infamous for the Monongah mining disaster, which took place in West Virginia, USA. The disaster resulted in the deaths of 362 miners, making it the worst coal mining accident in American history. The explosion was caused by a combination of factors, including a buildup of coal dust and methane gas. The tragedy led to significant changes in mining safety regulations and practices to prevent similar incidents in the future.

    Rate this question:

  • 2. 

    Which of the following is not one of the important things to consider when looking at ground control?

    • A.

      Pillar Design

    • B.

      Leveled Ground

    • C.

      Roof Supports

    • D.

      Horizontal Stress Support

    Correct Answer
    B. Leveled Ground
    Explanation
    When looking at ground control, leveled ground is an important factor to consider. It ensures stability and prevents any unevenness or slopes that could lead to accidents or structural damage. Pillar design, roof supports, and horizontal stress support are also crucial considerations when assessing ground control as they contribute to the overall strength and safety of the structure. Therefore, the correct answer is "Leveled Ground" because it is indeed an important aspect to consider when looking at ground control.

    Rate this question:

  • 3. 

    What is the full meaning of the acronym ''SLAM'' used in risk management in mining operations?

    • A.

      Stop Learn Act Measure

    • B.

      Save Look Appeal Make

    • C.

      Save Look Assess Measure

    • D.

      Stop Look Assess Manage 

    Correct Answer
    D. Stop Look Assess Manage 
    Explanation
    SLAM stands for Stop Look Assess Manage in the context of risk management in mining operations. This acronym represents a systematic approach to managing risks in mining operations. It emphasizes the importance of stopping to evaluate the situation, looking for potential hazards, assessing the risks involved, and implementing appropriate measures to manage those risks effectively. This approach helps to ensure the safety of workers and minimize potential accidents or incidents in mining operations.

    Rate this question:

  • 4. 

    Which of the following is the most commonly needed respiratory protection in mining operations?

    • A.

      Toxic chemical protection

    • B.

      Dust protection

    • C.

      Vapour protection

    • D.

      Fumes protection

    Correct Answer
    B. Dust protection
    Explanation
    In mining operations, the most commonly needed respiratory protection is dust protection. Mining activities often generate a significant amount of dust, which can contain harmful particles such as silica or coal dust. Breathing in this dust over a prolonged period can lead to respiratory diseases such as silicosis or black lung. Therefore, wearing respiratory protection specifically designed to filter out dust particles is crucial in ensuring the safety and health of miners.

    Rate this question:

  • 5. 

    Which of the following are not worn frequently below ground unless a particular operation poses a danger of chemical splash?

    • A.

      Goggles

    • B.

      Respirator

    • C.

      Face mask

    • D.

      Cap lamp

    Correct Answer
    A. Goggles
    Explanation
    Goggles are not worn frequently below ground unless a particular operation poses a danger of chemical splash. This suggests that goggles are not commonly used underground unless there is a specific risk of chemical splashes. Other protective equipment such as respirators, face masks, and cap lamps may be more commonly used in underground environments for different purposes.

    Rate this question:

  • 6. 

    What is the full meaning of the acronym 'SMART' used for risk management during mining operations?

    • A.

      Save Measure Appear Right Team 

    • B.

      Stop Measure Act Review Train

    • C.

      Savage Many Acts Right Test

    • D.

      Specific Measurable Achievable Realistic Timely

    Correct Answer
    B. Stop Measure Act Review Train
    Explanation
    The correct answer is "Stop Measure Act Review Train". This acronym, SMART, is used in risk management during mining operations. It emphasizes the importance of stopping to assess the situation, measuring the risks involved, taking appropriate action, reviewing the effectiveness of the actions taken, and continuously training and improving the risk management processes.

    Rate this question:

  • 7. 

    Which type of battery still predominates in most mining applications and operations?

    • A.

      Lead acid battery

    • B.

      Nickel metal hydride battery

    • C.

      Lithium-ion battery

    • D.

      Nickel-cadmium (nicad) battery

    Correct Answer
    A. Lead acid battery
    Explanation
    Lead acid batteries still predominates in most mining applications and operations due to their reliability, durability, and cost-effectiveness. These batteries have a long cycle life and can withstand harsh operating conditions, making them ideal for the demanding environments of mining operations. Additionally, lead acid batteries have a lower upfront cost compared to other battery types, making them a preferred choice for mining companies looking to minimize expenses.

    Rate this question:

  • 8. 

    When was the Fair Labor Standards Act passed by Congress, which prohibits the use of workers under 18 for occupations that were deemed dangerous?

    • A.

      1940

    • B.

      1932

    • C.

      1938

    • D.

      1943

    Correct Answer
    C. 1938
    Explanation
    The Fair Labor Standards Act was passed by Congress in 1938. This act prohibits the use of workers under 18 for occupations that were considered dangerous.

    Rate this question:

  • 9. 

    Which of the following is not an eye and face protection equipment?

    • A.

      Safety spectacles

    • B.

      Goggles

    • C.

      Face shields

    • D.

      Cap lamp

    Correct Answer
    D. Cap lamp
    Explanation
    A cap lamp is not an eye and face protection equipment because it is primarily used for providing illumination in dark environments such as mines. It is designed to be worn on the head and does not offer any form of protection for the eyes or face. Safety spectacles, goggles, and face shields, on the other hand, are specifically designed to protect the eyes and face from potential hazards such as flying debris, chemicals, or intense light.

    Rate this question:

  • 10. 

    Which of the following is not one of the most important things that should be included when documenting safety procedures?

    • A.

      Who is charge of the safety procedures

    • B.

      What needs to be done

    • C.

      Description of the various incidents that might occur

    • D.

      Whom to contact

    Correct Answer
    A. Who is charge of the safety procedures
    Explanation
    The question asks for something that should not be included when documenting safety procedures. The answer "Who is in charge of the safety procedures" is incorrect because it is one of the most important things that should be included. Knowing who is responsible for the safety procedures is crucial for effective implementation and accountability.

    Rate this question:

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Mar 22, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • Dec 13, 2018
    Quiz Created by
    AdewumiKoju
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.