Automotive Axles Limited 30th Year Anniversary Quiz!

Painting the axle serves the purpose of protecting it from corrosion. The paint acts as a barrier, preventing moisture and other corrosive elements from coming into direct contact with the metal surface of the axle. This helps to prolong the lifespan of the axle and maintain its structural integrity. Additionally, the paint also provides a visually appealing finish, making the axle look better.

An axle is typically filled with oil to lubricate the moving parts and reduce friction. This helps to ensure smooth rotation and minimize wear and tear on the axle components. Oil is commonly used in automotive applications as it provides effective lubrication and can withstand high temperatures and pressures.

The name plate of an axle typically contains the serial number, ratio, and manufacturer name. This information is important for identifying and determining the specifications of the axle. The serial number helps in tracking the history and origin of the axle, while the ratio indicates the gear ratio of the axle. The manufacturer name provides information about the company that produced the axle, which can be useful for warranty, maintenance, and compatibility purposes. Therefore, all of the above information is available on the name plate of an axle.

Rivets are used to attach a liner to a shoe. They are small metal fasteners that are inserted through holes in the liner and the shoe material, and then the ends of the rivets are flattened or hammered down to secure them in place. This method provides a strong and durable attachment between the liner and the shoe.

Smoking is not allowed inside AAL.

The function of the differential is to provide for speed difference between the two wheelends. The differential allows the wheels on the same axle to rotate at different speeds, especially when the vehicle is turning. This is important because the outer wheel needs to travel a greater distance than the inner wheel during a turn. The differential allows for this speed difference, ensuring smooth and efficient operation of the vehicle.

Trucks with a valid no pollution certificate are allowed inside AAL. This indicates that AAL has strict regulations in place to ensure that only environmentally-friendly trucks are allowed on their premises. By requiring a valid no pollution certificate, AAL is promoting sustainable practices and reducing the negative impact of truck emissions on the environment. This policy also aligns with the increasing global focus on reducing pollution and promoting cleaner transportation options.

The key parameters that help decide an Axle model include torque, reliability, and load. Torque is important because it determines the amount of rotational force the axle can handle. Reliability is crucial as it ensures the axle's durability and performance over time. Load is a significant factor because it determines the weight capacity that the axle can support. Considering all of these parameters is necessary to choose the appropriate axle model for a specific application.

Safety equipment that is mandatory inside the plant includes shoes, safety glasses, and appropriate clothing. These items are necessary to protect employees from potential hazards such as falling objects, chemicals, and electrical hazards. Shoes with non-slip soles and safety glasses help prevent injuries to the feet and eyes, while appropriate clothing, such as flame-resistant or high-visibility garments, can provide protection against specific risks. By requiring all of the above safety equipment, the plant ensures the well-being and safety of its employees.

The correct answer is Meritor because ArvinMeritor changed its name to Meritor.

The reason KTMS was sold and then bought back was because Meritor, the company involved, refused to deal with Asbestos. This implies that KTMS had some involvement or connection to Asbestos, which led to Meritor's refusal.

LPG gas is used in the heat treatment furnace because it has a high calorific value, which means it produces a large amount of heat when burned. This makes it ideal for heating up the furnace to the required temperature for heat treatment processes. Additionally, LPG gas is easily accessible and widely used in various industries, making it a convenient choice for heat treatment furnaces.

The dimpled cover is used in a housing because it reduces the amount of oil needed in the axle. The dimples create small pockets that help to distribute the oil more evenly, reducing the overall amount needed. This can help to improve efficiency and reduce maintenance requirements.

The spindle is covered with plastic during dispatch to prevent corrosion. This is because exposure to moisture and other elements during transportation can lead to rust and deterioration of the spindle. By covering it with plastic, the spindle is protected from these external factors, ensuring its quality and longevity.

A drum brake typically consists of two to four brake shoes, which are the liners that press against the inside of the drum to create friction and slow down or stop the vehicle. Therefore, the correct answer is 2-4.

The Pantnagar unit manufactures drum brakes.

A tandem axle refers to a set of two axles that are placed close together and used to support a vehicle's weight. This configuration is commonly found in trucks and trailers. Therefore, the correct answer is 2, as there are two axles in a tandem axle setup.

not-available-via-ai

A Hub Reduction Axle is used for all of the above reasons. It improves ground clearance by raising the axle, which helps to prevent damage to the axle and other components when driving over rough terrain. It also improves the life of the axle by reducing stress on the components, resulting in less wear and tear. Additionally, a hub reduction axle has the capability to handle higher torque, making it suitable for heavy-duty applications. Therefore, all of the given options are valid reasons for using a hub reduction axle.

The '1' in MS XX 145 indicates that the axle has a single speed ratio.

Housing halves are welded using MIG welding. MIG welding, also known as Gas Metal Arc Welding (GMAW), is a process in which a continuous and consumable wire electrode is fed through a welding gun, creating an electric arc between the wire and the base material. The heat generated by the arc melts the wire and the base material, fusing them together to form a strong weld. MIG welding is commonly used in the automotive industry and is suitable for welding various types of metals, including steel, aluminum, and stainless steel.

The truck suspension sits on the spring seat. The spring seat is a component of the suspension system that supports and holds the springs in place. It provides a stable platform for the springs to absorb and distribute the weight and impact of the truck, allowing for a smoother and more comfortable ride.

Meritor offers a warranty on its axles that is greater than one year. This means that customers can expect their axles to be covered for a period longer than one year, providing them with assurance and protection against any potential defects or issues that may arise during this time. The exact duration of the warranty is not specified, but it is clear that it extends beyond one year.

not-available-via-ai

The correct answer is "Rim" because a truck tyre is mounted on the rim of the wheel. The rim provides the structure and support for the tyre, allowing it to be securely attached to the wheel. The rim also helps to maintain the shape and integrity of the tyre while the truck is in motion.

In a 6X2 vehicle, the first number (6) represents the total number of wheels on the vehicle, while the second number (2) represents the number of powered wheels (the ones that receive power from the engine). The remaining wheels are non-powered and are used for support. Since there are 6 wheels in total and 2 of them are powered, there are 4 non-powered wheels, which means there are 4 axles.

not-available-via-ai

not-available-via-ai

A brake liner is made of friction material. This material is specifically designed to provide the necessary friction and heat resistance required for effective braking. It is able to withstand the high temperatures generated during braking and maintain a consistent level of friction between the brake pads and the brake rotor or drum. Using a material specifically designed for friction ensures optimal braking performance and durability.

The half moon symbol is used to identify a Meritor Axle. This symbol is likely to be displayed on the name plate or logo of the axle. By looking for this symbol, one can easily identify if the axle is a Meritor Axle or not.

Face hobbing is the type of gear cutting that is currently being used for most of our CWP (Crown Wheel and Pinion) gears.

The approximate weight of a QX 1495 is between 600-699 Kg.

There are a total of 12 different models of Drive Axle that we make.

not-available-via-ai