Practice Locksmith Test #2

Reviewed by Editorial Team
The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.
Learn about Our Editorial Process
| By Lockgurl
L
Lockgurl
Community Contributor
Quizzes Created: 2 | Total Attempts: 17,589
| Attempts: 8,602
SettingsSettings
Please wait...
  • 1/20 Questions

    A blank is basically just:

    • A change key with cuts on one side only
    • An uncut or uncombinated key
    • Any key with no words or numbers on the bow
    • A master key with no words or numbers on the bow
Please wait...
About This Quiz

Practice Locksmith Test #2 assesses key locksmithing skills, focusing on lock mechanisms like Kwikset Titan, pin tumbler house door locks, and GM's wafer sidebar locks. It evaluates understanding of lock picking challenges, lock types, and key design, essential for aspiring locksmiths.

Practice Locksmith Test #2 - Quiz

Quiz Preview

  • 2. 

    A combination lock requirew a key to be opened

    • True

    • False

    Correct Answer
    A. False
    Explanation
    The statement is incorrect because a combination lock does not require a key to be opened. Instead, it requires a specific sequence of numbers or symbols to be entered in the correct order to unlock it. Keys are typically used for traditional locks, where a physical key is inserted into a lock mechanism to open it. However, combination locks operate differently and do not rely on keys for their functionality.

    Rate this question:

  • 3. 

    How many sets of pintumblers are in a typical pin tumbler house door lock?

    • 3 or 4

    • 5 or 6

    • 11 or 12

    • 7 or 8

    Correct Answer
    A. 5 or 6
    Explanation
    A typical pin tumbler house door lock consists of multiple pin tumblers, which are small cylindrical pins that move up and down within the lock cylinder. Each pin tumbler is paired with a corresponding driver pin, and the combination of these pins determines the lock's key code. Generally, there are multiple pin tumblers in a lock, with each set consisting of a pin tumbler and a driver pin. The question asks how many sets of pin tumblers are in a typical lock, and the correct answer is 5 or 6, indicating that there are 5 or 6 pairs of pin tumblers and driver pins in the lock.

    Rate this question:

  • 4. 

    Spool and Mushroom pins:

    • Make keys easier to duplicate

    • Can hinder normal picking attempts

    • Make a lock easier to pick

    • Make keys harder to duplicate

    Correct Answer
    A. Can hinder normal picking attempts
    Explanation
    Spool and mushroom pins can hinder normal picking attempts. These types of pins are designed to create false sets and increase the difficulty of picking a lock. When a pick is inserted into the lock, these pins will catch on the pick, causing the pins to bind and giving the appearance of a set pin. This can confuse and frustrate a picker, making it more challenging to successfully pick the lock. Therefore, spool and mushroom pins can act as a deterrent to picking attempts.

    Rate this question:

  • 5. 

    Most locks on BMW's have 8 disc tumblers and are easy to pick open

    • True

    • False

    Correct Answer
    A. False
    Explanation
    The statement is false because most locks on BMW's do not have 8 disc tumblers and are not easy to pick open.

    Rate this question:

  • 6. 

    You must run the cutter of a key machine into the vise jaw.

    • True

    • False

    Correct Answer
    A. False
    Explanation
    Running the cutter of a key machine into the vise jaw is not necessary or recommended. The vise jaw is used to hold the key blank securely in place while cutting, but the cutter should not come into contact with the vise jaw. The cutter is responsible for shaping the key blank and should only interact with the blank itself.

    Rate this question:

  • 7. 

    What does VATS stand for?

    • Vehicular Alarm Timing System

    • Vehicle Anti Theft System

    • Vehicle Alarm Theft System

    • Vehicle Anti Thief System

    Correct Answer
    A. Vehicle Anti Theft System
    Explanation
    VATS stands for Vehicle Anti Theft System. This system is designed to prevent unauthorized access and theft of vehicles. It includes various security features such as immobilizers, alarms, and tracking devices to deter thieves and protect the vehicle from being stolen.

    Rate this question:

  • 8. 

    The 2 most common key stops are :

    • Blade and v cut

    • Shoulder and tip

    • Bow and blade

    • Keyway grooves and bittings

    Correct Answer
    A. Shoulder and tip
    Explanation
    The correct answer is "Shoulder and tip." In key cutting, the shoulder refers to the part of the key that stops against the lock face when fully inserted, while the tip is the end of the key that enters the lock mechanism. These two stops are crucial in determining the correct length and shape of the key, ensuring it fits and operates smoothly in the lock. The other options mentioned are not relevant in the context of key stops.

    Rate this question:

  • 9. 

    A popular type of lock used on GM cars is:

    • A Medeco pin tumbler

    • An Automotive Bit key

    • A sidebar wafer

    • An Automotive tubular key

    Correct Answer
    A. A sidebar wafer
    Explanation
    The correct answer is A sidebar wafer. Sidebar wafers are commonly used in locks on GM cars. They are small metal discs or wafers that are inserted into the lock cylinder and interact with the sidebar mechanism to provide additional security. This type of lock is designed to prevent unauthorized access to the vehicle and is commonly used in automotive security systems.

    Rate this question:

  • 10. 

    A rubberband can assist in opening some types of locks

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Rubberbands can be used as a tool to open certain types of locks. By wrapping the rubberband around the lock and applying tension, it can create enough friction to turn the lock mechanism and unlock the door. This technique is commonly known as the "rubber band lock picking" method and is often used in emergency situations or by locksmiths. Therefore, the statement "A rubberband can assist in opening some types of locks" is true.

    Rate this question:

  • 11. 

    A key in knob lock whose default position is that both knobs are locked and require that a key be used for unlocking is :

    • A classroom lock

    • A function lock

    • An institution lock

    • A school lock

    Correct Answer
    A. An institution lock
    Explanation
    An institution lock refers to a type of key in knob lock that is commonly used in large organizations or institutions such as universities, hospitals, or government buildings. These locks typically have a default position where both knobs are locked, requiring the use of a key to unlock them. This design ensures better security and control over access to certain areas within the institution. Therefore, an institution lock is the most appropriate term to describe this type of lock.

    Rate this question:

  • 12. 

    When a key turns hard in a car door cylinder, it is often the result of:

    • An improperly bent rod

    • A screwdriver that was shoved into it

    • A broken lock

    • Bugs in the lock

    Correct Answer
    A. An improperly bent rod
    Explanation
    When a key turns hard in a car door cylinder, it is often the result of an improperly bent rod. The rod connects the key cylinder to the door latch mechanism, and if it is bent incorrectly, it can cause friction and difficulty in turning the key. This can happen due to wear and tear over time or improper installation.

    Rate this question:

  • 13. 

    Which manufacturer is best known for its interchangeable core locks?

    • Best Lock

    • Kwikset Corporation

    • Ilco Interchangeable Core Corporation

    • Interchangeable Core Corporation

    Correct Answer
    A. Best Lock
    Explanation
    Best Lock is the correct answer because it is the manufacturer that is best known for its interchangeable core locks. The other options, Kwikset Corporation, Ilco Interchangeable Core Corporation, and Interchangeable Core Corporation, are not as well-known for producing interchangeable core locks.

    Rate this question:

  • 14. 

    A electromagnetic lock can exert a holding force of 15000 pounds

    • True

    • False

    Correct Answer
    A. False
    Explanation
    An electromagnetic lock is a type of lock that uses an electrical current to create a magnetic field, which then holds the lock in place. While electromagnetic locks can exert a significant holding force, it is highly unlikely that they can exert a force of 15000 pounds. Such a force would be extremely powerful and not typically found in standard electromagnetic locks, making the statement false.

    Rate this question:

  • 15. 

    As a general rule, General Motors' 10 cut wafer sidebar locks have:

    • A sum total of cut depths that must equal an even number

    • Up to four of the same depth cut in the 7,8,9 and 10 spaces

    • A maximum of five number 1 depths in a code combination

    • At least one -1 oe 1-4 adjacent cuts

    Correct Answer
    A. A sum total of cut depths that must equal an even number
    Explanation
    The correct answer is that General Motors' 10 cut wafer sidebar locks have a sum total of cut depths that must equal an even number. This means that when you add up all the cut depths in the lock, the result must be an even number. This requirement ensures that the lock is properly aligned and functions correctly.

    Rate this question:

  • 16. 

    VIN stands for Vehicle Information Number

    • True

    • False

    Correct Answer
    A. False
    Explanation
    The correct answer is False because VIN actually stands for Vehicle Identification Number, not Vehicle Information Number. The VIN is a unique code consisting of a combination of letters and numbers that is used to identify individual vehicles. It provides information about the vehicle's manufacturer, specifications, and history.

    Rate this question:

  • 17. 

    Which type of cylinder is typically found on an interlocking deadbolt or "jimmy proof"deadlock?

    • Mortise cylinder

    • Key in knob cylinder

    • Rim Cylinder

    • Tubular Deadbolt Cylinder

    Correct Answer
    A. Rim Cylinder
    Explanation
    A rim cylinder is typically found on an interlocking deadbolt or "jimmy proof" deadlock. This type of cylinder is mounted on the surface of the door, rather than being inserted into the door like a mortise cylinder. It is usually used in conjunction with a rim lock, which is a surface-mounted lock that is attached to the inside face of the door. The rim cylinder is inserted into the rim lock and operates the deadbolt, providing extra security for the door.

    Rate this question:

  • 18. 

    A Kwikset Titan has a MACS of:

    • 5

    • 4

    • 7

    • 9

    Correct Answer
    A. 4
    Explanation
    A Kwikset Titan has a MACS (Maximum Adjacent Cut Specification) of 4. This means that the difference between any two adjacent cuts on the key cannot exceed 4. The MACS is a measure of the key's security and determines how difficult it is for someone to pick or manipulate the lock. A lower MACS value indicates a higher level of security, as it limits the possible combinations of key cuts. Therefore, a MACS of 4 indicates that the Kwikset Titan is relatively secure and harder to pick compared to higher MACS values.

    Rate this question:

  • 19. 

    The Simplex Unican 1000 series Lock offers double protection with a combination and a keyway

    • True

    • False

    Correct Answer
    A. False
    Explanation
    The Simplex Unican 1000 series Lock does not offer double protection with a combination and a keyway. Therefore, the correct answer is false.

    Rate this question:

  • 20. 

    The Preso-Matic installation template requires how many 1" holes to be drilled?

    • 8

    • 12

    • 10

    • 1

    Correct Answer
    A. 12
    Explanation
    The Preso-Matic installation template requires 12 1" holes to be drilled.

    Rate this question:

Quiz Review Timeline (Updated): Mar 22, 2023 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Mar 22, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • May 05, 2012
    Quiz Created by
    Lockgurl

Recent Quizzes

Locksmith Questions: Trivia Quiz! Locksmith Questions: Trivia Quiz!
Oklahoma Locksmith Practice Test Oklahoma Locksmith Practice Test
Locksmith Questions: Trivia Quiz! Locksmith Questions: Trivia Quiz!
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.