Dgca Module 08 Basic Aerodynamics
-
At higher altitudes as altitude increases, pressure.
-
Decreases at constant rate.
-
Decreases exponentially.
-
Increases exponentially.
-
The DGCA Module 08 Basic Aerodynamics quiz covers key concepts such as altitude pressure relationships, factors affecting airplane wing lift, and standard atmospheric conditions. It is designed to assess and enhance understanding of aerodynamics for aeronautical engineering students or professionals.
Quiz Preview
- 2.
Which of the following factors primarily determines the lift generated by an airplane wing?
-
Air pressure difference between the upper and lower surfaces of the wing.
-
The color of the airplane.
-
The weight of the airplane.
-
The speed of the airplane on the ground
Correct Answer
A. Air pressure difference between the upper and lower surfaces of the wing.Explanation
Lift is generated primarily due to the pressure difference between the upper and lower surfaces of an airplane's wing. This difference is created by the wing's shape (airfoil) and its angle of attack, causing air to move faster over the top surface than the bottom surface, resulting in lower pressure above the wing and higher pressure below it. The other factors listed, such as the color of the airplane, the weight of the airplane, and its speed on the ground, do not directly influence the generation of lift.Rate this question:
-
- 3.
Which one do you like?
-
Yee
-
Jjryj
-
Jtrjrt
-
Trjtyuytu
Correct Answer
A. Yee -
- 4.
When the pressure is half of that at sea level, what is the altitude?
-
12,000 ft.
-
18,000 ft.
-
8,000 ft.
Correct Answer
A. 18,000 ft.Explanation
When the pressure is half of that at sea level, the altitude is 18,000 ft. This is because as altitude increases, the atmospheric pressure decreases. At sea level, the atmospheric pressure is considered to be 1 atmosphere. When the pressure is half of that, it means that the atmospheric pressure is 0.5 atmospheres. According to the standard atmospheric pressure lapse rate, this corresponds to an altitude of approximately 18,000 ft.Rate this question:
-
- 5.
The millibar is a unit of.
-
Atmospheric temperature.
-
Pressure altitude.
-
Barometric pressure.
Correct Answer
A. Barometric pressure.Explanation
The millibar is a unit of measurement used to quantify barometric pressure. Barometric pressure refers to the pressure exerted by the Earth's atmosphere at a specific location. It is commonly used in weather forecasting and aviation to determine changes in weather patterns and altitude. The millibar scale is based on the metric system and is equal to one-thousandth of a bar, which is a unit of pressure. Therefore, the correct answer is barometric pressure.Rate this question:
-
- 6.
Standard sea level temperature is.
-
20 degrees Celsius.
-
0 degrees Celsius.
-
15 degrees Celsius.
Correct Answer
A. 15 degrees Celsius.Explanation
The correct answer is 15 degrees Celsius because standard sea level temperature is the average temperature at sea level under normal atmospheric conditions. This average temperature is typically around 15 degrees Celsius.Rate this question:
-
- 7.
Lapse rate usually refers to.
-
Density.
-
Pressure.
-
Temperature.
Correct Answer
A. Temperature.Explanation
Lapse rate refers to the rate at which temperature decreases with an increase in altitude. It is a measure of how the temperature changes vertically in the atmosphere. As one goes higher in the atmosphere, the temperature usually decreases, and this rate of decrease is known as the lapse rate. Therefore, the correct answer is temperature.Rate this question:
-
- 8.
ISA includes
-
Pressure only
-
Temperature and density
-
Pressure, temperature and density
Correct Answer
A. Pressure, temperature and densityExplanation
ISA, or the International Standard Atmosphere, is a model that represents the average atmospheric conditions at sea level. It includes pressure, temperature, and density as parameters. Pressure refers to the force exerted by the atmosphere on a given area, temperature represents the average kinetic energy of the air molecules, and density refers to the mass of air per unit volume. These three parameters are crucial in understanding and predicting the behavior of the atmosphere and its impact on various phenomena, such as weather patterns, aircraft performance, and atmospheric chemistry.Rate this question:
-
- 9.
Density is
-
Weight / Volume
-
Volume / mass
-
Mass / Volume
Correct Answer
A. Mass / VolumeExplanation
Density is a physical property of a substance and is defined as the mass of the substance divided by its volume. This means that the correct answer is "Mass / Volume". The density of a substance remains constant regardless of the sample size, making it a useful property for identifying and comparing different materials.Rate this question:
-
- 10.
Which does not depend on density of air for its operation.
-
Rocket
-
Kite
-
Parachute
Correct Answer
A. RocketExplanation
A rocket does not depend on the density of air for its operation because it carries its own oxidizer and fuel, allowing it to operate in the vacuum of space where there is no air. In contrast, a kite relies on the density of air to generate lift, and a parachute relies on air resistance to slow down its descent. Therefore, the correct answer is rocket.Rate this question:
-
Quiz Review Timeline (Updated): Sep 17, 2024 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Sep 17, 2024Quiz Edited by
ProProfs Editorial Team -
Oct 03, 2018Quiz Created by
Senthamilselvan
Back to top