2A952 Volume 1 UREs (2016)

1. (011) Which of the following is not a condition for a category 1 deficiency report?

If uncorrected, could cause death

Directly restricts combat readiness

Is attributable to errors in workmanship

Would cause major damage to equipment

2. (007) What type of errors may not be detected by Integrated Maintenance Data System (IMDS)?

Mismatched HOW MAL and ACTION TAKEN codes

Mismatched ID number and WORK UNIT codes

Incorrect menu selection

One-of-a-kind entries

3. (007) The primary purpose of Integrated Maintenance Data System (IMDS) screen 380 is to

Provide an up-to-date list of open job control numbers (JCN)

Provide an opportunity to modify entries found to be in error

Generate a new JCN and show time spent against this number

Maintain the present data and status of YR/EVENT IDs and work center events (WCE)

4. (007) An on-line inquiry option can be selected from Integrated Maintenance Data System (IMDS) screen 099 by inputting the

Option number only

ID ASSIGNED and the option number

YR/EVENT ID and the option number

YR/EVENT ID, work center event (WCE), and the option number

5. (008) What must the G081 automated maintenance information system user have prior to accessing the system?

SSSN/ID and password

USER/ID and password

SSSN/ID and access code

USER/ID and access code

6. (001) What factor gives Air Force wings, squadrons, and units the capability of fighting from either main bases or bare bones forward operating locations at any level of combat?

Centralization

Decentralization

Strategic intelligence

Dispersed flying units

7. (008) Which program used in the G081 automated maintenance information system is considered to be the "heart" of the system?

Variable Information Retrieval Program (VIRP)

Batch

Data input

Data output

8. (009) Supply discipline starts with

Each individual

Your supervisor

Your commander

Your branch chief

9. (010) Which type of property responsibility requires that directives and instructions be issued?

Custodial

Command

Supervisory

Administrative

10. (010) Property responsibility can be relieved by

Turn-in of the property to supply

Having the property declared surplus

Having the property declared unserviceable

Contacting the base equipment management office

11. (010) What is used to explain and record the circumstances which involved the lost, damage, or destruction of an equipment item that cost more than $500?

Report of Survey

Military Pay Order

Statement of Charges

Cash collection voucher

12. (011) Where does the originator send deficiency report supporting data?

Base supply

Screening point

Squadron commander

Depot from which the item came

13. (008) The four types of programs used in the G081 automated maintenance information system are data input, data output,

Batch, and VIRP

Group, and VIRP

Batch, and VRRP

Group, and VRRP

14. (012) What is the most common type of deficiency report you will encounter as an aircraft maintainer?

Product quality deficiency report

Exhibit maintenance report

Quality product report

Product exhibit report

15. (013) If you wanted to address inquires on any classification interpretation, what section of the security classification guide would you use?

Operational data

General instructions

Release of information

Performance and capabilities

16. (013) What section of the security classification guide develops operational tactics and techniques?

Operational data

General instructions

Release of information

Performance and capabilities

17. (013) If unclassified information involves a public disclosure, how far in advance must the request be sent to the office of primary responsibility (OPR) for review before public release?

At least 15 days

At least 25 days

At least 35 days

At least 45 days

18. (014) As a minimum, preventative maintenance and inspection requirements are accomplished for safes every

Two years

Five years

Two months

Five months

19. (015) Which technical manual contains data for the operation, servicing, and maintenance of test equipment?

Aircraft

Job guide

Commercial

Other equipment

20. (015) Which letters are contained in the numerical designator of a checklist technical order (TO)?

CL

LC

WC

CH

21. (016) What type of technical order (TO) supplements are printed on green paper to distinguish them from other supplements?

Interim Operational Supplements (IOS)

Formal Operational Supplements (OS)

Interim Safety Supplement (ISS)

TO Page Supplement (TOPS)

22. (016) Besides an improvement, recommended changes to technical orders (TO) must be identified as which type of change?

Urgent

Correction

Significant

Emergency

23. (017) The Automated Computer Program Identification Number System (ACPINS) does notprovide a system to establish

One-time orders

Customer accounts

Subscription requirements

Contractor logistics software

24. (018) How many fields are there in a Computer Program Identification Number (CPIN)?

Three

Four

Five

Six

25. (004) All of the following may be included on a bulletin board except

Important information

Classified information

Unclassified information

For Official Use Only information

26. (002) Which maintenance squadron flight supports the field assistance support team for calibration (FASTCAL)?

Test, measurement, and diagnostic equipment (TMDE)

Armament maintenance

Accessory maintenance

Avionics

27. (003) What are Air Force (AF) policy directives?

Directives that prescribe the mission, area or responsibility, organisation, responsibilities, and command relationships of AF units

Guidance documents consisting of procedures that usually contain examples for performing standard tasks

28. (001) Who is responsible for managing the squadron's cannibalization program?

Section chief

Flight line expediter

Flight commander/chief

Maintenance officer/maintenance supervisor

29. (001) Who monitors new requirements for training, equipment authorizations, special tools, work space, facilities, and manning?

Section chief

Squadron commander

Flight commander/chief

Maintenance officer/maintenance supervisor

30. (003) Field commands may supplement any of the publication types except

Air Force instructions

Staff digests

Directories

Pamphlets

31. (004) As a rule, display of temporary visual aids should be limited to

10 months or less

6 months or less

90 days or less

30 days or less

32. (005) Which is not a base-level use of Maintenance Data Collection (MDC) information?

Analysis of Not Repairable This Station (NRTS) actions

Production credit information

Configuration status accounting

Determining the cost of military man-hours

33. (005) What is the primary source of information for equipment configuration status at base, command, and depot levels?

Maintenance Cost System (MCS)

Maintenance Data Collection (MDC)

Core Automated Maintenance System (CAMS)

Advanced Configuration Management System (ACMS)

34. (005) The Reliability and Maintainability Information System (REMIS) designed for

Collecting data for the Defense Data Network (DDN)

Providing information to support the AF equipment maintenance program

Documenting production data for the Maintenance Data Collection (MDC)

Accumulating data for the Core Automated Maintenance System (CAMS)

35. (001) The total production effort and management of group maintenance functions are the responsibility of the

Wing commander

Group commander

Maintenance officer

Maintenance operations center

36. (006) The first five digits of a job control number (JCN) indicate the

Year and Julian date

Last five digits of the equipment serial number

First five digits of the equipment serial number

Month and year that the maintenance discrepancy was discovered

37. (006) A five-character data element that identifies organizational units to which maintenance personnel are assigned or to which they may be dispatched is the

Work unit code

Work center code

Job control number

Identification number

38. (006) What type of work center contributes labor towards a maintenance requirement?

Owning

Reporting

Performing

Nonreporting

39. (006) The computer translates an equipment identification (ID) number into all of the following except

Work unit code

Repair action taken

Owning work center

Standard reporting designator

40. (007) In the Integrated Maintenance Data System (IMDS), correcting erroneous data is a function of

Data reporting

Information retrieval

Data base management

The error detection subsystem

41. (006) Which Maintenance Data Collection (MDC) data element is published in manuals for each weapon and support system?

Identification number

Job control number

Work center code

Work unit code

42. (007) Which is not an Integrated Maintenance Data System (IMDS) design factor?

Improve efficiency

More responsive systems

Increase administrative tasks

Identify changing equipment needs

43. (001) Who is responsible for allocating the maintenance resources required to meet mission requirements?

Wing commander

Resource commander

Logistics commander

Maintenance commander

44. (017) Who has responsibility for determination and designation of Computer Software Configuration Items (CSCI)?

Innovative Development through Employee Awareness (IDEA) program monitor

Technical order (TO) manager

Software manager

Engineers

45. (016) Which is not an authorised type of technical order (TO) supplement?

Formal Operational Supplement (OS)

Operational Page Supplement (OPS)

Interim Safety Supplement (ISS)

TO Page Supplement (TOPS)

46. (016) When are technical order (TO) changes issued?

When changed material affects more than 80 percent of the TO

Only when part of an existing TO is affected

Only when urgent safety action is required

When the whole TO is affected

47. (002) Whose role is it to increase reliability and maintainability of aircraft and support equipment?

Wing commander

Quality assurance

Weapons standardization

Maintenance operations center

48. (015) Which type of technical order (TO) is not an abbreviated TO?

Checklist

Supplemental

Inspection workcard

Inspection sequence chart

49. (015) Publications that contain instructions for use with other manuals are identified as

Indexes

Supplemental manuals

Other equipment technical orders (TO)

Commercial-off-the-shelf (COTS) manuals

50. (015) What type of manual is a reduced size technical order (TO) which includes step-by-step procedures?

Aircraft

Job guide

Commercial

Other equipment

51. (003) Which publication contains broad, enduring guidance for preparing and employing Air Force (AF) resources to support national objectives?

AF doctrine documents

Operating instructions

Mission directives

Manuals

52. (012) What type of deficiency report must be forwarded within three workdays?

Category I

Category II

Category III

Category IV

53. (008) Which of the following is not a function of the G081 automated maintenance information system?

Mission scheduling

Maintenance scheduling

Personnel leave scheduling

Personnel training management

54. (014) If you order a Secret classified asset from base supply, what do you need to receive custody of the asset?

Have a military identification card and valid need to know

Hold a top secret security clearance and valid need to know

Have a valid need to know and be listed on an authorised roster

Have a military identification card and be listed on an authorised roster

55. (014) The Standard Form (SF) 702, Security Container Check Sheet, is used to

List and record security inspection items

Approve the storage of classified material

Document opening and closing of the security container

Provide an inventory of classified material in the security container

56. (010) Who are accountable for equipment items?

Supply personnel and equipment custodians

Resource advisers and equipment custodians

Maintenance personnel and resource advisors

Equipment manufacturers and supply personnel

57. (015) Which technical order (TO) is not a type of time compliance technical order (TCTO)?

Urgent action

Routine action

Immediate action

Emergency action

58. (003) Which publication should not contain procedures of detailed "how-to" instructions?

Mission directives

Air Force manuals

Air Force instructions

Air Force policy directives

59. (003) Which type of Air Force publication cannot be supplemented?

Manuals

Instructions

Policy directives

Mission directives

2A952 Volume 1 UREs (2016)

1. (011) Which of the following is not a condition for a category 1 deficiency report?

2.

What first name or nickname would you like us to use?

2. (007) What type of errors may not be detected by Integrated Maintenance Data System (IMDS)?

3. (007) The primary purpose of Integrated Maintenance Data System (IMDS) screen 380 is to

4. (007) An on-line inquiry option can be selected from Integrated Maintenance Data System (IMDS) screen 099 by inputting the

5. (008) What must the G081 automated maintenance information system user have prior to accessing the system?

6. (001) What factor gives Air Force wings, squadrons, and units the capability of fighting from either main bases or bare bones forward operating locations at any level of combat?

7. (008) Which program used in the G081 automated maintenance information system is considered to be the "heart" of the system?

8. (009) Supply discipline starts with

9. (010) Which type of property responsibility requires that directives and instructions be issued?

10. (010) Property responsibility can be relieved by

11. (010) What is used to explain and record the circumstances which involved the lost, damage, or destruction of an equipment item that cost more than $500?

12. (011) Where does the originator send deficiency report supporting data?

13. (008) The four types of programs used in the G081 automated maintenance information system are data input, data output,

14. (012) What is the most common type of deficiency report you will encounter as an aircraft maintainer?

15. (013) If you wanted to address inquires on any classification interpretation, what section of the security classification guide would you use?

16. (013) What section of the security classification guide develops operational tactics and techniques?

17. (013) If unclassified information involves a public disclosure, how far in advance must the request be sent to the office of primary responsibility (OPR) for review before public release?

18. (014) As a minimum, preventative maintenance and inspection requirements are accomplished for safes every

19. (015) Which technical manual contains data for the operation, servicing, and maintenance of test equipment?

20. (015) Which letters are contained in the numerical designator of a checklist technical order (TO)?

21. (016) What type of technical order (TO) supplements are printed on green paper to distinguish them from other supplements?

22. (016) Besides an improvement, recommended changes to technical orders (TO) must be identified as which type of change?

23. (017) The Automated Computer Program Identification Number System (ACPINS) does notprovide a system to establish

24. (018) How many fields are there in a Computer Program Identification Number (CPIN)?

25. (004) All of the following may be included on a bulletin board except

26. (002) Which maintenance squadron flight supports the field assistance support team for calibration (FASTCAL)?

27. (003) What are Air Force (AF) policy directives?

28. (001) Who is responsible for managing the squadron's cannibalization program?

29. (001) Who monitors new requirements for training, equipment authorizations, special tools, work space, facilities, and manning?

30. (003) Field commands may supplement any of the publication types except

31. (004) As a rule, display of temporary visual aids should be limited to

32. (005) Which is not a base-level use of Maintenance Data Collection (MDC) information?

33. (005) What is the primary source of information for equipment configuration status at base, command, and depot levels?

34. (005) The Reliability and Maintainability Information System (REMIS) designed for

35. (001) The total production effort and management of group maintenance functions are the responsibility of the

36. (006) The first five digits of a job control number (JCN) indicate the

37. (006) A five-character data element that identifies organizational units to which maintenance personnel are assigned or to which they may be dispatched is the

38. (006) What type of work center contributes labor towards a maintenance requirement?

39. (006) The computer translates an equipment identification (ID) number into all of the following except

40. (007) In the Integrated Maintenance Data System (IMDS), correcting erroneous data is a function of

41. (006) Which Maintenance Data Collection (MDC) data element is published in manuals for each weapon and support system?

42. (007) Which is not an Integrated Maintenance Data System (IMDS) design factor?

43. (001) Who is responsible for allocating the maintenance resources required to meet mission requirements?

44. (017) Who has responsibility for determination and designation of Computer Software Configuration Items (CSCI)?

45. (016) Which is not an authorised type of technical order (TO) supplement?

46. (016) When are technical order (TO) changes issued?

47. (002) Whose role is it to increase reliability and maintainability of aircraft and support equipment?

48. (015) Which type of technical order (TO) is not an abbreviated TO?

49. (015) Publications that contain instructions for use with other manuals are identified as

50. (015) What type of manual is a reduced size technical order (TO) which includes step-by-step procedures?

51. (003) Which publication contains broad, enduring guidance for preparing and employing Air Force (AF) resources to support national objectives?

52. (012) What type of deficiency report must be forwarded within three workdays?

53. (008) Which of the following is not a function of the G081 automated maintenance information system?

54. (014) If you order a Secret classified asset from base supply, what do you need to receive custody of the asset?

55. (014) The Standard Form (SF) 702, Security Container Check Sheet, is used to

56. (010) Who are accountable for equipment items?

57. (015) Which technical order (TO) is not a type of time compliance technical order (TCTO)?

58. (003) Which publication should not contain procedures of detailed "how-to" instructions?

59. (003) Which type of Air Force publication cannot be supplemented?