Vol 1. Aircrew Flight Equipment Journeyman
Vol 1. Aircrew Flight Equipment Mission and Function
WARNING!:� Not intended to use for WAPS testing or for personnel in upgrade training. �Not intended to replace CDC material given for those purposes. � For personal use only, use at own risk!
- 1.
You identify high-pressure aviator's oxygen clinders by their green color and...
- A.
A single white band only
- B.
The words "OXYGEN AVIATOR'S" stenciled in white letters along the cylinder side only.
- C.
Two white bands and the words "OXYGEN AVIATOR'S" stenciled along the cylinder side.
- D.
A green nand followed by a white band and the words "OXYGEN AVIATOR's" stenciled in white letters along the cylinder side
Correct Answer
A. A single white band onlyExplanation
High-pressure aviator's oxygen cylinders are identified by their green color and a single white band only. This means that the cylinder will have a green color and only one white band around it. There will be no other markings or words on the cylinder, except for the single white band. This is the distinguishing feature that helps identify high-pressure aviator's oxygen cylinders.Rate this question:
-
- 2.
Who determines facility, equipment, supply and storage requirments for aircrew flight equipment units?
- A.
Wing Commander
- B.
Aircrew flight equipment craftsman
- C.
Aircrew flight equipment journeyman
- D.
Aircrew Flight equipment superintendents
Correct Answer
D. Aircrew Flight equipment superintendentsExplanation
Aircrew Flight equipment superintendents determine the facility, equipment, supply, and storage requirements for aircrew flight equipment units. They are responsible for overseeing and managing the operations of these units, ensuring that all necessary resources are available for the aircrew. This includes determining the appropriate facilities, equipment, supplies, and storage solutions needed to support the aircrew's flight equipment requirements.Rate this question:
-
- 3.
Which supply condition tag would you use identify a condemned G-suit awaiting pick up from supply?
- A.
DD Form 1574
- B.
DD Form 1575
- C.
DD Form 1577
- D.
DD Form 1348-6
Correct Answer
C. DD Form 1577Explanation
The correct answer is DD Form 1577. This form is used to identify and track condemned or unserviceable items that are awaiting pick up from supply. It is specifically designed for this purpose and ensures proper documentation and accountability for the condemned G-suit.Rate this question:
-
- 4.
Which of these items may be a cause of foreign object damage (FOD)?
- A.
Tools
- B.
Vehicles
- C.
Leads Seals
- D.
All of the above
Correct Answer
D. All of the aboveExplanation
All of the listed items (tools, vehicles, leads seals) can potentially cause foreign object damage (FOD). FOD refers to any object, substance, or debris that can cause damage to an aircraft, equipment, or personnel. Tools, if not properly stored or secured, can become loose and pose a risk of FOD. Vehicles, such as ground support equipment, can inadvertently leave behind objects or debris on the runway or taxiway. Leads seals, if damaged or improperly installed, can result in FOD. Therefore, all of these items have the potential to cause FOD.Rate this question:
-
- 5.
Which of these formats would normally indicate a calibration due date of 8 january 2009 on an inspection label for a test, measurment, and diagnostic equipment (TMDE) item?
- A.
Julian date (09008)
- B.
Numeric Month/day/year (01/08/09)
- C.
Numeric year/month/day (09/01/08)
- D.
Written out day, month, and year(8 jan 09)
Correct Answer
A. Julian date (09008)Explanation
The Julian date format is used to represent dates as a simple numerical value, with the first two digits representing the year and the last three digits representing the day of the year. In this case, the Julian date "09008" indicates that the calibration due date for the TMDE item is January 8th, 2009.Rate this question:
-
- 6.
Which of these does not meet the requirement for 5-level upgrade?
- A.
Completion of CDC 1P051
- B.
12 Months time in Service
- C.
Certification on all applicable 5 level core task
- D.
Completion of 15 months on the job training (OJT)
Correct Answer
B. 12 Months time in ServiceExplanation
The requirement for a 5-level upgrade includes completion of CDC 1P051, certification on all applicable 5-level core tasks, and completion of 15 months on the job training (OJT). However, the 12 months time in service does not specifically meet the requirement for a 5-level upgrade.Rate this question:
-
- 7.
Which condition tag do you use to identify a serviceable survival kit?
- A.
DD Form 1574
- B.
DD Form 1575
- C.
DD Form 1577
- D.
DD Form 1577-2
Correct Answer
A. DD Form 1574Explanation
DD Form 1574 is the correct answer because it is the condition tag used to identify a serviceable survival kit. The other options (DD Form 1575, DD Form 1577, and DD Form 1577-2) are not relevant to identifying a survival kit's serviceability.Rate this question:
-
- 8.
What tester is used to check the visual acuity of night vision goggles?
- A.
ANV-126
- B.
TS-24B
- C.
TTU-529/E
- D.
ANV-20/20
Correct Answer
D. ANV-20/20Explanation
The ANV-20/20 tester is used to check the visual acuity of night vision goggles.Rate this question:
-
- 9.
What tester designed to test combat edge equipment does not require compressed air or oxygen cylinders?
- A.
SCOT
- B.
CAST
- C.
MQ-1/A
- D.
TTU-529/E
Correct Answer
B. CASTExplanation
CAST stands for Combined Aircrew Systems Tester. It is a tester designed to test combat edge equipment such as oxygen masks, helmets, and communication systems used by aircrew members. Unlike other options listed, CAST does not require compressed air or oxygen cylinders to function. Therefore, it is the correct answer for the given question.Rate this question:
-
- 10.
What is the primary source for distribution of asstes to accomplish the mission?
- A.
SBSS
- B.
CAMS
- C.
GPC
- D.
Centralized Server
Correct Answer
A. SBSSExplanation
SBSS stands for Standard Base Supply System, which is a primary source for the distribution of assets to accomplish the mission. It is a computer-based inventory management system used by the United States Air Force. SBSS helps in managing and tracking the supply chain, ensuring that the necessary assets are distributed efficiently to support the mission objectives. It provides real-time visibility of inventory, automates processes, and enables effective decision-making regarding asset distribution.Rate this question:
-
- 11.
What is the first step in preparing to use a test, measurment and diagnostic equipment (TMDE) item?
- A.
Properly set up the TMDE for the inspection at hand
- B.
Ensure all applicable parts are on hand and serviceable
- C.
Make sure item's calibration inspections cycle has not expired
- D.
Consult the TMDE item technical order (TO) for operating instructions
Correct Answer
C. Make sure item's calibration inspections cycle has not expiredExplanation
The first step in preparing to use a test, measurement, and diagnostic equipment (TMDE) item is to make sure the item's calibration inspection cycle has not expired. This is important because TMDE items need to be regularly calibrated to ensure accurate and reliable measurements. If the calibration inspection cycle has expired, the item may not provide accurate results and could lead to incorrect diagnoses or measurements. Therefore, it is crucial to check the calibration inspection cycle before using the TMDE item to ensure its reliability and accuracy.Rate this question:
-
- 12.
What information does an explosive facility license contain?
- A.
AFTO Form 15 due date
- B.
Location of fire extinguisher
- C.
Lot number of explosives and service life
- D.
Location and quantities of explosives authorized
Correct Answer
C. Lot number of explosives and service lifeExplanation
An explosive facility license contains information about the lot number of explosives and their service life. This means that the license provides details about the specific batch or group of explosives, as well as the period of time during which they can be safely and effectively used. This information is crucial for ensuring the proper management and control of explosives within the facility.Rate this question:
-
- 13.
What forms are used to identify deficiency exhibits?
- A.
AFTO Form 110 and 115
- B.
DD Forms 1574 and 1577
- C.
DD Forms 1575 and 2332
- D.
Standard Form 368 and 519
Correct Answer
C. DD Forms 1575 and 2332 -
- 14.
What form do you use to issue equipment on a temporary basis?
- A.
DD Form 2005
- B.
DD Form 1297
- C.
AF Form 2005
- D.
AF Form 1297
Correct Answer
D. AF Form 1297Explanation
AF Form 1297 is the correct answer because it is the form used to issue equipment on a temporary basis in the Air Force. This form is known as the Temporary Issue Receipt and it is used to document the transfer of equipment from one individual or unit to another for a specific period of time. It includes details such as the equipment being issued, the quantity, the date of issue, and the signature of both the issuing and receiving parties.Rate this question:
-
- 15.
What form do you use to change an authorization on an allowance source code(ASC)?
- A.
D04, Daily Document Register
- B.
DD Form 1348-6
- C.
AF Form 2005
- D.
AF Form 601
Correct Answer
D. AF Form 601Explanation
The AF Form 601 is used to change an authorization on an allowance source code (ASC). This form is specifically designed for this purpose and is the correct form to use for making such changes. The other options provided, D04 Daily Document Register, DD Form 1348-6, and AF Form 2005, are not the appropriate forms for this task.Rate this question:
-
- 16.
What form do you use if a hazard cannot be eliminated at your level?
- A.
AF FORM457
- B.
AF FORM 467
- C.
DD Form 467
- D.
DD Form 467
Correct Answer
A. AF FORM457Explanation
The correct answer is AF FORM457. This form is used when a hazard cannot be eliminated at the individual's level. It is a tool for reporting and documenting hazards that pose a risk to personnel or equipment. By using this form, individuals can ensure that the necessary steps are taken to address and mitigate the hazard, even if they are unable to eliminate it entirely.Rate this question:
-
- 17.
What element of supply would you contact if you wanted to obtain steel-toed boots?
- A.
Equipment Management
- B.
Demand processing
- C.
Customer Service
- D.
Retail Sales
Correct Answer
D. Retail SalesExplanation
If you wanted to obtain steel-toed boots, you would contact the element of supply known as Retail Sales. Retail sales is the part of the supply chain that deals directly with customers and sells products to them. They are responsible for managing inventory, assisting customers with their purchases, and ensuring that the products are available and accessible to the customers. Therefore, if you wanted to obtain steel-toed boots, you would reach out to the retail sales department or store that sells these boots.Rate this question:
-
- 18.
What element of supply would provide general information?
- A.
Equipment managment
- B.
Demand porcessing
- C.
Customer service
- D.
Retail Service
Correct Answer
C. Customer serviceExplanation
Customer service is the correct answer because it is a key element of supply that focuses on providing general information to customers. Customer service involves assisting customers with their inquiries, providing product information, and addressing any concerns or issues they may have. This element plays a crucial role in ensuring customer satisfaction and building long-term relationships with customers.Rate this question:
-
- 19.
What does fire symbol three (3) indicates?
- A.
Three types of pyrotechnics are stored inside
- B.
Only three people are allowed inside the facility at one time
- C.
A facility contains ammunition and explosives capable of producing a mass fire
- D.
A facility contains a ammunition and explosives capable of producing a moderate fire.
Correct Answer
C. A facility contains ammunition and explosives capable of producing a mass fireExplanation
The correct answer indicates that a facility contains ammunition and explosives capable of producing a mass fire. This means that the presence of three fire symbols indicates a high risk and potential for a large-scale fire if there is a mishap or accident involving the stored ammunition and explosives.Rate this question:
-
- 20.
What does fire symbol four (4) indicates?
- A.
Four types of pyrotechnics are stored inside
- B.
Only four people are allowed inside the facility at one time
- C.
A facility contains ammunition and explosives capable of producing a mass fire
- D.
A facility contains a ammunition and explosives capable of producing a moderate fire
Correct Answer
D. A facility contains a ammunition and explosives capable of producing a moderate fireExplanation
The correct answer indicates that a facility contains ammunition and explosives capable of producing a moderate fire.Rate this question:
-
- 21.
What color are carbon dioxide cylinders, other than the 12-to 28 gram size?
- A.
Gray
- B.
Green
- C.
Silver
- D.
Yellow
Correct Answer
A. GrayExplanation
Carbon dioxide cylinders, other than the 12-to 28 gram size, are gray in color.Rate this question:
-
- 22.
What are the minimum requirements to be awarded AFSC 1P071?
- A.
Complete 18 months OJT only
- B.
Attend in residence course Aircrew Flight Equipment Craftsman only
- C.
Complete twelve months OJT, be certified in all applicable 7 level core tasks,and be selected for promotion to staff sergeant.
- D.
Complete twelve months OJT, be certified in all applicable 7 level core tasks, attend all survival school course, and be selected for promotion to staff sergeant.
Correct Answer
C. Complete twelve months OJT, be certified in all applicable 7 level core tasks,and be selected for promotion to staff sergeant.Explanation
To be awarded AFSC 1P071, the minimum requirements include completing twelve months of on-the-job training (OJT), being certified in all applicable 7 level core tasks, and being selected for promotion to staff sergeant. This indicates that not only do individuals need to gain practical experience through OJT, but they also need to demonstrate proficiency in their core tasks and show potential for career advancement.Rate this question:
-
- 23.
What AFI publication lists your personal responsibilities to ensure that your work place is as safe as possible?
- A.
11-301,V1
- B.
11-301,V2
- C.
91-301
- D.
91-302
Correct Answer
C. 91-301Explanation
AFI 91-301 is an Air Force Instruction publication that lists personal responsibilities for ensuring workplace safety. This publication provides guidelines and regulations for individuals to follow in order to maintain a safe work environment. It outlines the specific actions and precautions that individuals should take to minimize risks and prevent accidents or injuries. By following the guidelines set forth in AFI 91-301, individuals can contribute to creating a safe and secure workplace.Rate this question:
-
- 24.
Usually, what type of items are listed in allowance documents?
- A.
Repairable
- B.
Expendable
- C.
Consumable
- D.
Nonexpendable
Correct Answer
D. NonexpendableExplanation
Allowance documents typically list nonexpendable items. Nonexpendable items are durable goods that are expected to have a long useful life and are not consumed or expended in a short period of time. These items are usually not consumed or depleted with use and can be reused multiple times. Examples of nonexpendable items include tools, equipment, furniture, and vehicles.Rate this question:
-
- 25.
To input information into Integrated Maintenance Data System (IMDS), the cursor must be in the...
- A.
Job data document (JDD) menu
- B.
Neutral position
- C.
Home position
- D.
Still mode
Correct Answer
C. Home positionExplanation
To input information into Integrated Maintenance Data System (IMDS), the cursor must be in the home position. This is because the home position is the default starting point for inputting data into the system. It ensures that any information entered is correctly recorded and organized within the IMDS. The home position is where the cursor is located before any input is made, allowing the user to begin entering data from a standardized starting point.Rate this question:
-
- 26.
To identify ground safety pins, look for the attached
- A.
Yellow stramers with black diagonal lines
- B.
Magneta placard
- C.
Red streamers
- D.
Red 550 corder
Correct Answer
C. Red streamersExplanation
The correct answer is red streamers. Ground safety pins can be identified by looking for the attached red streamers. The other options mentioned in the question, such as yellow streamers with black diagonal lines, magneta placard, and red 550 corder, are not the indicators for ground safety pins.Rate this question:
-
- 27.
The supply control document on which the status of accountable and controlled assets are recorded is the
- A.
Supply control log
- B.
Priority monitor report
- C.
Due-out validation listing
- D.
Due in from maintenance listing
Correct Answer
D. Due in from maintenance listingExplanation
The correct answer is "Due in from maintenance listing." This document records the status of accountable and controlled assets that are due to be returned from maintenance. It helps track the assets and ensures they are returned in a timely manner. The other options, such as the supply control log, priority monitor report, and due-out validation listing, do not specifically pertain to assets being returned from maintenance.Rate this question:
-
- 28.
The overall objective of the Standard Base Supply to...
- A.
Reduce operation costs
- B.
Meet the customer's needs
- C.
Rapidly procure supplies and equipment
- D.
Validate and track all supply transactions
Correct Answer
B. Meet the customer's needsExplanation
The overall objective of the Standard Base Supply is to meet the customer's needs. This means that the primary goal of the supply system is to ensure that the customers, which could be military personnel or other organizations, receive the necessary supplies and equipment they require. By focusing on meeting the customer's needs, the supply system aims to provide efficient and effective support, ensuring that the customers have the resources they need to carry out their operations.Rate this question:
-
- 29.
The last nine digits of a national stock number is know as the
- A.
Federal Supply classification group
- B.
National item identification number
- C.
Federal supply classification code
- D.
Federal Supply File
Correct Answer
B. National item identification numberExplanation
The last nine digits of a national stock number is known as the National item identification number. This number is used to uniquely identify specific items within the Federal Supply System. It provides detailed information about the item, such as its characteristics, specifications, and source of supply. The National item identification number is an important component of the stock number and plays a crucial role in inventory management and tracking of items in the Federal Supply System.Rate this question:
-
- 30.
The expendability, recoverablitiy, reparability cost designator code that identifies due-in from maintenance (DIFM) items is....
- A.
NB
- B.
NF
- C.
XB
- D.
XD
Correct Answer
D. XDExplanation
The correct answer is XD. The XD code is used to identify due-in from maintenance (DIFM) items that are expendable, meaning they are not expected to be repaired or recovered. This code indicates that the items are expected to be used and disposed of rather than being repaired or returned to stock.Rate this question:
-
- 31.
Integrated maitenance Data Systems (IMDS) screens are...
- A.
Menu driven and user oriented
- B.
User driven and menu oriented
- C.
Task oriented and menu driven
- D.
Menu oriented and task driven
Correct Answer
C. Task oriented and menu drivenExplanation
The correct answer is "task oriented and menu driven". This means that the IMDS screens are designed to prioritize the completion of specific tasks and are organized in a menu format to facilitate user navigation. The system focuses on guiding users through various tasks and providing them with a clear menu structure to access different functions.Rate this question:
-
- 32.
How often must the Integrated Maintenance Data System (IMDS) user passwords be changed?
- A.
Every 12 months
- B.
When the user PCSs
- C.
Never, the system is always secure.
- D.
Whenever a compromise is suspected or every 90 days
Correct Answer
D. Whenever a compromise is suspected or every 90 daysExplanation
The correct answer is Whenever a compromise is suspected or every 90 days. This means that the passwords for Integrated Maintenance Data System (IMDS) users should be changed either every 90 days as a regular security measure or whenever there is suspicion of a compromise to ensure the system remains secure. This helps to prevent unauthorized access and protects sensitive information within the system.Rate this question:
-
- 33.
How many digits does a national stock number NSN have?
- A.
Eleven
- B.
Twelve
- C.
Thirteen
- D.
Fourteen
Correct Answer
C. ThirteenExplanation
A national stock number (NSN) typically consists of thirteen digits. This unique identifier is used to catalog and track items within the military supply chain. Each digit in the NSN represents specific information, such as the country code, the federal supply group, the national item identification number, and the item's serial number. Therefore, the correct answer is thirteen.Rate this question:
-
- 34.
Forecasts for selected calendar time change items must be made
- A.
Annually
- B.
Bi-annually
- C.
Every two years
- D.
Every three years
Correct Answer
A. AnnuallyExplanation
The given question is asking for the frequency at which forecasts for selected calendar time change items should be made. The correct answer is "annually" which means that these forecasts should be made once every year. This ensures that the forecasts are up to date and take into account any changes or developments that may occur on a yearly basis.Rate this question:
-
- 35.
Bench stock items are generally...
- A.
Non-expendable items
- B.
Available spare equipment
- C.
Allowed expendable items for mobility
- D.
Low cost, regularly used expendable items
Correct Answer
D. Low cost, regularly used expendable itemsExplanation
Bench stock items are generally low cost, regularly used expendable items. This means that they are items that are relatively inexpensive and are regularly used in the course of operations. These items are not expected to last for a long time and are meant to be used up or consumed. They are kept in stock on the bench or in a designated area for easy access and replenishment.Rate this question:
-
- 36.
Bench stock is established to provide
- A.
Necessary spare parts at the worker level
- B.
A means of monitoring supply consumption rates
- C.
A method of instantly requisitioning high use supplies
- D.
Supply item manager's visibility on frequently used items
Correct Answer
A. Necessary spare parts at the worker levelExplanation
Bench stock is established to provide necessary spare parts at the worker level. This means that workers have access to the spare parts they need in order to quickly and efficiently perform their tasks. By having these spare parts readily available, workers can avoid delays or interruptions in their work due to equipment breakdowns or the unavailability of necessary components. This helps to improve productivity and minimize downtime.Rate this question:
-
- 37.
An example of an expendable supply item would be a....
- A.
Desk
- B.
Pencil
- C.
Test set
- D.
Computer
Correct Answer
B. PencilExplanation
An example of an expendable supply item would be a pencil because it is a consumable item that is used up or depleted over time. Pencils are easily worn down and need to be replaced frequently, making them a necessary and expendable supply in various settings such as offices, schools, and art studios. Unlike a desk, test set, or computer, which are durable and long-lasting, a pencil is a disposable item that needs to be replenished regularly.Rate this question:
-
- 38.
All protective equipment must meet the standards listed by...
- A.
NIOSH or ANSI
- B.
AFI11-301,V1
- C.
AFI 91-302
- D.
AFI 91-302
Correct Answer
A. NIOSH or ANSIExplanation
All protective equipment must meet the standards listed by NIOSH or ANSI. These two organizations, NIOSH and ANSI, are recognized authorities in the field of safety and protection. NIOSH (National Institute for Occupational Safety and Health) sets standards and conducts research to ensure the effectiveness of protective equipment. ANSI (American National Standards Institute) is responsible for developing and maintaining voluntary consensus standards for a wide range of products, including protective equipment. Meeting the standards set by NIOSH or ANSI ensures that the protective equipment is of high quality and provides the necessary level of protection.Rate this question:
-
- 39.
What forms are used to identify deficiency exhibits?
- A.
AFTO Form 110 and 115.
- B.
DD Forms 1574 and 1577.
- C.
DD Forms 1575 and 2332
- D.
Standard Forms 368 and 519
Correct Answer
C. DD Forms 1575 and 2332Explanation
DD Forms 1575 and 2332 are used to identify deficiency exhibits. These forms are commonly used in the military to document and track deficiencies or discrepancies found during inspections or maintenance activities. DD Form 1575 is used to document and report unsatisfactory conditions or deficiencies, while DD Form 2332 is used to document and report discrepancies or deficiencies found during the inspection of aircraft or equipment. These forms help ensure that any deficiencies are properly recorded and addressed, allowing for necessary repairs or corrective actions to be taken.Rate this question:
-
- 40.
Forecasts for selected calendar time change items must be made
- A.
Annually
- B.
Bi-annually
- C.
Every two years
- D.
Every three years
Correct Answer
A. AnnuallyExplanation
The word "annually" means once every year. The question is asking for the frequency at which forecasts for selected calendar time change items need to be made. Therefore, the correct answer is "annually," indicating that these forecasts should be made once every year.Rate this question:
-
- 41.
Which of these items would not be included in an annual conventional munitions forecast?
- A.
Reefing line cutters
- B.
Aircrew ammunition
- C.
Smoke and illumination type flares
- D.
Flares intended for training use only.
Correct Answer
A. Reefing line cuttersExplanation
An annual conventional munitions forecast is a projection of the expected demand for various types of munitions. Reefing line cutters are not typically considered conventional munitions as they are used for a specific purpose in parachutes to control the rate of descent. Therefore, they would not be included in an annual conventional munitions forecast.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 20, 2023Quiz Edited by
ProProfs Editorial Team -
Feb 10, 2011Quiz Created by
5674VIRELL
Back to top