Post-test How To Change A Flat Tire

1. Select which picture of a spare tire is correct as described in the WebQuest process section for tools required.

This is the correct option as it is a vehicle spare tire; the others are an inner tube and a bicycle tire.

Explanation

This is the correct option as it is a vehicle spare tire; the others are an inner tube and a bicycle tire.

About This Quiz

Post-test How To Change A Flat Tire - Quiz

Read each question carefully, then select the best choice either with a check mark or a number indicating the sequence. You will receive immediate feedback on your answers. Since this is a Pre-test, it is important that you DO NOT GUESS ON THIS TEST.... see moreAfter you are finished, you will be given an overall score and certificate for your records if you desire.
Take your time and good luck.
see less

2. What's your name?

We’ll put your name on your report, certificate, and leaderboard.

2. Select which picture of a jack is correct as described in the WebQuest process section for tools required.

This is the correct answer, the others are a safety pipe barrier and an aircraft jack which would not fit under a vehicle.

Explanation

This is the correct answer, the others are a safety pipe barrier and an aircraft jack which would not fit under a vehicle.

3. Select which picture of a safety warning triangle is correct as described in the WebQuest process section for tools required.

This is the correct answer, the others are a construction sign diamond and a Stop sign which is an octagon.

Explanation

This is the correct answer, the others are a construction sign diamond and a Stop sign which is an octagon.

4. Where would you find the information to locate the tools store in the vehicle that are required to change a flat tire?

Vehicle data plate

Vehicle owner manual

Vehicle dashboard system

Vehicle identification book

5. Select which picture of lug wrench is correct as described in the WebQuest process section for tools required?

This is the correct answer as it has a socket at one end and pry bar at opposite end.

Explanation

This is the correct answer as it has a socket at one end and pry bar at opposite end.

6. Match the these steps for changing a flat tire as described in the WebQuest to the proper number in sequential order.

These are the correct sequential order steps for changing a flat tire:
1. Block or chock tire that is not flat with heavy object.
2. Place the jack under the frame near the tire that you are going to change.
3. Raise the jack until it is supporting (but not lifting) the vehicle.
4. Remove the hub cap and loosen the lug nuts by turning counterclockwise.
5. Raise the jack until the entire tire is off the ground.
6. Place the spare tire on the hub.
7. Tighten the lug nuts by hand until they are all snug.
8. Lower the jack without applying full weight on the tire.
9. Lower the jack to the ground fully and remove the jack.
10. Put the old tire in your trunk and take it to a tire automotive shop.

Explanation

Submit