Orientation Quiz

1. According to the Moretrench "Bill of Rights" - You have the right and responsibility, when knowledgeable of job hazards, to STOP work, without fear of reprisal, to protect co-workers, others and yourself from imminent hazard situations.

True

False

2. Stop-STARRT should not be confused with the Human Performance Improvement Tool, Stop When Unsure, which is a temporary stoppage of work by the individual performing the task to assure that they themselves are performing the task correctly.

True

False

3. Always report every injury or incident IMMEDIATELY to your supervisor or a Safety Representative .

True

False

4. A good STARRT will paint a mental picture for the employees working on the task, and will give anyone not familiar with the site a basic understanding of the type of work in the area.

True

False

5. Seatbelts shall be worn at all times while operating or riding in a company vehicle or Mobile equipment. (NO SEAT BELT / NO RIDE)

True

False

6. The Safety Hazard Observation Wheel (SHOW) is a tool that Moretrench has developed to assist you in determining the hazards present.

True

False

7. All vehicles & mobile equipment shall have a daily inspection and the appropriate inspection form shall be completed. Report any defects to your supervisor.

True

False

8. Damaged or defective electrical tools must be removed from service immediately for disposal or repair. Ensure that damaged or defective tools are tagged with "Danger Do Not Use" tags.

True

False

9. As a Short Service Employee (SSE) I am required to wear an orange hardhat for the first six months, I will be drug screened once amonth for the first six months, and will also be subject to the random company wide drug and alcohol screening.

True

False

10. A guard is a physical barrier which prevents contact with a hazard.

True

False

11. The ESRM is issued to each employee and contains a condensed version of the Moretrench safety policies and procedures.

True

False

12. Safety toed boots meeting the ANSI Z41.1 requirements must be worn on ALL worksites. ALL BOOTS SHALL BE LACE UP.

True

False

13. The wellpoint system was designed to dewater the work sites and dry excavations.

True

False

14. Moretrench is made up of many divisions including geotechnical, civil, concrete, and mechanical.

True

False

15. Moretrench issued hardhats must be worn at all times when in the field, except in offices and lunchrooms. Ball caps shall not be worn under hardhats.

True

False

16. You should not lift anything by yourself that weighs over:

50 pounds

30 pounds

15 pounds

75 pounds

17. PASS stands for:

Sweep

Push

Aim

Saw

Squeeze

Pull

Air

Spark

Submit

18. How to use 'Stop When Unsure' check all that apply:

Obtain information from a book, drawing, procedure, or expert.

Ask your supervisor or co-worker to verify that your actions are correct.

Stand back and re-evaluate the potential hazards and consequences.

Every person has the responsibility and authority to stop work when uncertainty exists.

Submit

19. If during the course of work any deviation occurs from the conditions identified in the Description of Task, Task Steps, Hazards, Recommended Corrective Action, as outlined on the STARRT form:

Stop Work Authority must be invoked

Newly Identified Hazard(s) documented

Additional safe practices identified

A Re- STARRT shall be conducted

Submit

20. The STARRT process is the corner stone of the Moretrench safety process. Pick ALL elements below that discribe this process.

Define the Task

Analyze the Hazard

Determine what time lunch will be

Develop Controls

Feedback and improvement

Inspect Area

Submit

Orientation Quiz

1. According to the Moretrench "Bill of Rights" - You have the right and responsibility, when knowledgeable of job hazards, to STOP work, without fear of reprisal, to protect co-workers, others and yourself from imminent hazard situations.

2.

What first name or nickname would you like us to use?

2. Stop-STARRT should not be confused with the Human Performance Improvement Tool, Stop When Unsure, which is a temporary stoppage of work by the individual performing the task to assure that they themselves are performing the task correctly.

3. Always report every injury or incident IMMEDIATELY to your supervisor or a Safety Representative .

4. A good STARRT will paint a mental picture for the employees working on the task, and will give anyone not familiar with the site a basic understanding of the type of work in the area.

5. Seatbelts shall be worn at all times while operating or riding in a company vehicle or Mobile equipment. (NO SEAT BELT / NO RIDE)

6. The Safety Hazard Observation Wheel (SHOW) is a tool that Moretrench has developed to assist you in determining the hazards present.

7. All vehicles & mobile equipment shall have a daily inspection and the appropriate inspection form shall be completed. Report any defects to your supervisor.

8. Damaged or defective electrical tools must be removed from service immediately for disposal or repair. Ensure that damaged or defective tools are tagged with "Danger Do Not Use" tags.

9. As a Short Service Employee (SSE) I am required to wear an orange hardhat for the first six months, I will be drug screened once amonth for the first six months, and will also be subject to the random company wide drug and alcohol screening.

10. A guard is a physical barrier which prevents contact with a hazard.

11. The ESRM is issued to each employee and contains a condensed version of the Moretrench safety policies and procedures.

12. Safety toed boots meeting the ANSI Z41.1 requirements must be worn on ALL worksites. ALL BOOTS SHALL BE LACE UP.

13. The wellpoint system was designed to dewater the work sites and dry excavations.

14. Moretrench is made up of many divisions including geotechnical, civil, concrete, and mechanical.

15. Moretrench issued hardhats must be worn at all times when in the field, except in offices and lunchrooms. Ball caps shall not be worn under hardhats.

16. You should not lift anything by yourself that weighs over:

17. PASS stands for:

18. How to use 'Stop When Unsure' check all that apply:

19. If during the course of work any deviation occurs from the conditions identified in the Description of Task, Task Steps, Hazards, Recommended Corrective Action, as outlined on the STARRT form:

20. The STARRT process is the corner stone of the Moretrench safety process. Pick ALL elements below that discribe this process.