Trivia Quiz: What Do You Know About Optiair Air Intake System?
Settings
-
+
What Do You Know About Optiair Air Intake System? This system has an integrated pre-cleaner which aids in extending the filters life as it gets used. Take up the trivia quiz below and get to see just how much you may learn about this new design and its benefits to the user. All the best as you tackle it!
- 1.OptiAir systems address key design requirements such as
- A.
Built in mounting brackets
- B.
Reduction in size to fit smaller engine compartments
- C.
Sight glass technology to see when the housing is full of contaminant
- D.
Clamp free inlets and outlets
- 2.OptiAir elements have two major design innovations
- A.
Brightly colored gaskets and pleat spacers
- B.
Softer and pre lubed gaskets
- C.
Up to 30% more effective area and 60% more outlet area
- D.
Closed end and open end design
- 3.Optimized pleat depth allows for more media which results in
- A.
Greater capacity
- B.
Finer filtration
- C.
Lower rated flow
- D.
Lower capacity
- 4.The increased outlet area of OptiAir elements allow the element to
- A.
Handle higher flow rates with lower initial restriction
- B.
Do the work of larger filters in a smaller package
- C.
Both A and B
- D.
Neither A nor B
- 5.OptiAir elements have a/an _________________ design seal to allow for greater air flow.
- A.
Closed
- B.
Open
- C.
Radial
- D.
Compression
- 6.OptiAir housings are constructed of _____________ material.
- A.
Metal
- B.
Cellulose
- C.
StrataPore
- D.
Composite
- 7.OptiAir housings are available in ________________ body diameter.
- A.
2 to 3 inch
- B.
9 to 20 inch
- C.
3 to 20 inch
- D.
4 to 13 inch
- 8.OptiAir 1000, 1100 and 1300 series units feature __________ outlets.
- A.
Straight
- B.
90°
- C.
Both A and B
- D.
Neither A nor B
- 9.The 400 through 800 series OptiAir units feature _______ outlets.
- A.
Straight
- B.
90°
- C.
Both A and B
- D.
Neither A nor B
- 10.The OptiAir product line uses a ___________________ cover that allows for ease of service.
- A.
Wing nut
- B.
Lock nut
- C.
Snap on
- D.
Twist lock
- 11.All series of OptiAir housings have an included
- A.
Pressure tap for easy installation of a restriction gauge
- B.
Filter cleaning valve
- C.
Wing nut hold down bolt
- D.
Auxiliary gasket set
Back to top