A Rigging Safety True Or False Trivia Quiz

Approved & Edited by ProProfs Editorial Team
The editorial team at ProProfs Quizzes consists of a select group of subject experts, trivia writers, and quiz masters who have authored over 10,000 quizzes taken by more than 100 million users. This team includes our in-house seasoned quiz moderators and subject matter experts. Our editorial experts, spread across the world, are rigorously trained using our comprehensive guidelines to ensure that you receive the highest quality quizzes.
Learn about Our Editorial Process
| By Greg
G
Greg
Community Contributor
Quizzes Created: 20 | Total Attempts: 9,848
Questions: 8 | Attempts: 460

SettingsSettingsSettings
A Rigging Safety True Or False Trivia Quiz - Quiz

Are you ready for a Rigging Safety true or false trivia quiz? Oil is one of the most sought after natural resource that most countries wish to have control over. Rigging is one of the processes in which constructors used to secure materials to be moved. Do you consider yourself knowledgeable when it comes to the rigging process? Take up the true or false trivia below and test your knowledge on rigging safety.


Questions and Answers
  • 1. 

    "Fore & Aft" lines should be at least doubled and made fast with two half-hitches.

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
    Explanation
    The statement is true because "Fore & Aft" lines, which are used to secure a boat to a dock or another vessel, should be doubled and made fast with two half-hitches. This means that the line should be wrapped around the cleat or post twice and then secured with two half-hitches, which are knots that provide stability and security. By doubling the line and using two half-hitches, it ensures that the line is securely fastened and less likely to come loose or untie.

    Rate this question:

  • 2. 

    Sliding your feet across the deck where extra line is located may prevent your feet from stepping into the "bight" of the line.

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
    Explanation
    Sliding your feet across the deck where extra line is located can help prevent your feet from stepping into the "bight" of the line. The term "bight" refers to a loop or curve in the line that can easily catch your foot and cause you to trip or fall. By sliding your feet instead of lifting them, you can minimize the risk of stepping into the bight and ensure better stability and safety while moving on the deck.

    Rate this question:

  • 3. 

    Always keep your hands on the inside and bottom of the line, as it is rendering.

    • A.

      True

    • B.

      False

    Correct Answer
    B. False
    Explanation
    The statement suggests that one should always keep their hands on the inside and bottom of the line, as it is rendering. However, there is no context provided to understand what "line" is being referred to and what "rendering" means in this context. Therefore, it is not possible to determine whether the statement is true or false.

    Rate this question:

  • 4. 

    Stay out of the direct line of pull when handling or working around lines under tension.

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
    Explanation
    The statement is advising individuals to avoid being in the direct line of pull when dealing with or being near lines that are under tension. This is because if the line were to suddenly snap or release its tension, being in the direct line of pull could result in serious injury or even death. Therefore, it is important to stay out of this line to ensure personal safety.

    Rate this question:

  • 5. 

    The most common hazard that a rigger faces is electrocution?

    • A.

      True

    • B.

      False

    Correct Answer
    A. True
    Explanation
    The most common hazard that a rigger faces is electrocution. This is because riggers often work with electrical equipment and are exposed to live wires and high voltage. They need to be cautious and follow proper safety protocols to avoid coming into contact with electricity, which can be fatal. Electrocution is a serious risk in the rigging industry, making it the most common hazard faced by riggers.

    Rate this question:

  • 6. 

    It is safe to use a hook with a bent safety latch?

    • A.

      True

    • B.

      False

    Correct Answer
    B. False
    Explanation
    It is not safe to use a hook with a bent safety latch. The safety latch is designed to prevent the hook from accidentally releasing the load, and if it is bent or damaged, it may not function properly. This could lead to the hook becoming disengaged and the load falling, causing potential harm or damage. Therefore, it is important to ensure that the safety latch on a hook is in good condition before using it.

    Rate this question:

  • 7. 

    A chain sling should never be used to lift heavy loads?

    • A.

      True

    • B.

      False

    Correct Answer
    B. False
    Explanation
    The statement is false because a chain sling is specifically designed and commonly used for lifting heavy loads. Chain slings are made of strong and durable materials, such as alloy steel, and are capable of withstanding heavy loads without breaking or failing. They are often preferred in industries like construction and manufacturing where heavy lifting is required. Therefore, it is incorrect to say that a chain sling should never be used to lift heavy loads.

    Rate this question:

  • 8. 

    Which of the following is not a type of hitch used in rigging operations?

    • A.

      Basket

    • B.

      Choker

    • C.

      Horizontal

    • D.

      Vertical.

    Correct Answer
    C. Horizontal
    Explanation
    The question asks to identify the type of hitch that is not used in rigging operations. The options provided are Basket, Choker, Horizontal, and Vertical. A basket hitch and a choker hitch are both commonly used in rigging operations. Vertical hitch is also a valid type of hitch used in rigging. Therefore, the correct answer is Horizontal, as it is not a type of hitch used in rigging operations.

    Rate this question:

Quiz Review Timeline +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Mar 22, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • Sep 11, 2013
    Quiz Created by
    Greg
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.