A lot of work goes into maintaining communication about the status of student submissions, what is the correct method of checking the status of your submission:

Checking the online status sheet

You can put money on your Flex Account through (select all that apply):

The wall-mounted black box on the 6th floor of Avery Hall

The register at the Output Shop

Most of the 3d printers in the Output Shop use FDM (Fused Deposition Modeling) which prints plastic. The two alternating types of plastic are ABS and PLA, why do these machines print two different types of plastic (select all that apply):

ABS plastic is the final model material, and PLA is the soluble support on which it prints

ABS costs more than PLA, but has a lower melting temperature

ABS plastic is the final model material, and PLA is the soluble support on which it prints

ABS is more fragile than PLA and care must be taken when working with it

ABS and PLA cost the same amount, $5 per cubic inch

All plots must be paid for before they can be taken from the shop, no exceptions. What methods of payment are acceptable for plots. (select all that apply):

Credit cards (No American Express)

The Output Shop is a not-for-profit entity of the Graduate School of Architecture, Planning and Preservation, offering services at rates that are well below commercial prices. What services does the Output Shop offer? (select all that apply)

Plotting (Large Format Printing)

Output Shop (Ops) Certification Test

Approved & Edited by ProProfs Editorial Team

At ProProfs Quizzes, our dedicated in-house team of experts takes pride in their work. With a sharp eye for detail, they meticulously review each quiz. This ensures that every quiz, taken by over 100 million users, meets our standards of accuracy, clarity, and engagement.

Learn about Our Editorial Process

| Written by Outputshop

Outputshop

Community Contributor

Quizzes Created: 1 | Total Attempts: 62

Questions: 7 | Attempts: 62 | Updated: Jun 19, 2023

Questions

Settings

Create your own Quiz

Output Shop (Ops) Certification Test - Quiz

After passing this test please bring your printed certificate to the Output Shop where you will be given a sticker that will allow you to use the shop's equipment.

Questions and Answers

1.

When submitting a print job to the Output Shop (OPS) you must include:
- A.
  
  Your last name
- B.
  
  Your studio critic
- C.
  
  Your UNI
- D.
  
  Your phone number
Correct Answer
C. Your UNI

Explanation
When submitting a print job to the Output Shop (OPS), it is necessary to include your UNI. This is because the UNI serves as a unique identifier for each individual within a university or educational institution. Including your UNI ensures that the OPS can accurately track and process your print job, avoiding any confusion or mix-up with other users. Additionally, the UNI allows the OPS to easily contact you if there are any issues or questions regarding your print job.

Rate this question:
2.

When plotting, students should select the plotter that corresponds to their desired paper type. The types of paper available at the Output Shop include (select all that apply):
- A.
  
  Light Weight Bond
- B.
  
  Heavy Weight Bond
- C.
  
  Mylar Matte Film
- D.
  
  Satin Gloss Photo Paper
- E.
  
  Clear Acetate
Correct Answer(s)
A. Light Weight Bond
B. Heavy Weight Bond
C. Mylar Matte Film
D. Satin Gloss Photo Paper

Explanation
The correct answer is Light Weight Bond, Heavy Weight Bond, Mylar Matte Film, and Satin Gloss Photo Paper. These are the types of paper available at the Output Shop. Students should select the plotter that corresponds to their desired paper type in order to achieve the desired results for their plotting needs.

Rate this question:
3.

A lot of work goes into maintaining communication about the status of student submissions, what is the correct method of checking the status of your submission:
- A.
  
  Asking an Output Shop employee
- B.
  
  Checking the online status sheet
- C.
  
  Checking your Columbia e-mail
- D.
  
  Asking your studio critic
Correct Answer
B. Checking the online status sheet

Explanation
The correct method of checking the status of your submission is by checking the online status sheet. This is the most efficient and reliable way to stay updated on the progress and status of your submission. It allows for easy access and eliminates the need to rely on other individuals or methods for information.

Rate this question:
4.

You can put money on your Flex Account through (select all that apply):
- A.
  
  The wall-mounted black box on the 6th floor of Avery Hall
- B.
  
  The register at the Output Shop
- C.
  
  The Dean's Office
Correct Answer
A. The wall-mounted black box on the 6th floor of Avery Hall

Explanation
The correct answer is the wall-mounted black box on the 6th floor of Avery Hall. This means that one of the ways to put money on your Flex Account is by using the wall-mounted black box on the 6th floor of Avery Hall.

Rate this question:
5.

Most of the 3d printers in the Output Shop use FDM (Fused Deposition Modeling) which prints plastic. The two alternating types of plastic are ABS and PLA, why do these machines print two different types of plastic (select all that apply):
- A.
  
  ABS costs more than PLA, but has a lower melting temperature
- B.
  
  ABS plastic is the final model material, and PLA is the soluble support on which it prints
- C.
  
  ABS is more fragile than PLA and care must be taken when working with it
- D.
  
  ABS and PLA cost the same amount, $5 per cubic inch
Correct Answer
B. ABS plastic is the final model material, and PLA is the soluble support on which it prints

Explanation
The reason why these machines print two different types of plastic is because ABS plastic is used as the final model material, while PLA is used as the soluble support on which it prints. This means that ABS is the main material that forms the actual object, while PLA is a temporary support material that can be dissolved or removed after the printing process is complete.

Rate this question:
6.

All plots must be paid for before they can be taken from the shop, no exceptions. What methods of payment are acceptable for plots. (select all that apply):
- A.
  
  Cash only
- B.
  
  Credit cards (No American Express)
- C.
  
  Wire transfer
- D.
  
  Flex account/Student ID
Correct Answer
D. Flex account/Student ID

Explanation
Flex account/Student ID is an acceptable method of payment for plots.

Rate this question:
7.

The Output Shop is a not-for-profit entity of the Graduate School of Architecture, Planning and Preservation, offering services at rates that are well below commercial prices. What services does the Output Shop offer? (select all that apply)
- A.
  
  CNC Routing
- B.
  
  Plotting (Large Format Printing)
- C.
  
  3D Printing
- D.
  
  Scanning
- E.
  
  Laser Cutting
Correct Answer(s)
B. Plotting (Large Format Printing)
D. Scanning

Explanation
The Output Shop, a not-for-profit entity of the Graduate School of Architecture, Planning and Preservation, offers Plotting (Large Format Printing) and Scanning services. These services are provided at rates that are well below commercial prices.

Rate this question: