PM - Calibration & Refurbishment Process

Reviewed by Editorial Team
The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.
Learn about Our Editorial Process
| By Rajeshmishra
R
Rajeshmishra
Community Contributor
Quizzes Created: 7 | Total Attempts: 1,534
| Attempts: 144
SettingsSettings
Please wait...
  • 1/40 Questions

    What is maintenance plan category for Plan Maintenance ?

    • PM
    • MM
    • NO
    • PP
    • None of above
Please wait...
About This Quiz

This quiz evaluates knowledge on the Calibration & Refurbishment Process in Plant Maintenance, covering inspection lot origins, transaction codes for maintenance plans and orders, activity types, and control keys. It's designed for professionals enhancing their technical skills in maintenance management.

PM - Calibration & Refurbishment Process - Quiz

Quiz Preview

  • 2. 

    SAP stands for

    • System Application Protocol

    • Software Application Product

    • System Application in Production

    • System Application & Product in Data processing

    • None of the above

    Correct Answer
    A. System Application & Product in Data processing
    Explanation
    SAP stands for System Application & Product in Data processing. This term refers to a software system that integrates various business functions such as finance, sales, and inventory management into a single platform. It is widely used by organizations to streamline their operations and improve efficiency. Therefore, the correct answer is System Application & Product in Data processing.

    Rate this question:

  • 3. 

    Maintenance Interval will get copied from....................to Maintenance Plan ?

    • Task List

    • Maintenance order

    • Equipment

    • Work Center

    • None of above

    Correct Answer
    A. Task List
    Explanation
    The Maintenance Interval will get copied from the Task List to the Maintenance Plan. The Task List contains a detailed list of tasks that need to be performed for maintenance purposes. When creating a Maintenance Plan, the Maintenance Interval is an important aspect that needs to be defined. By copying the Maintenance Interval from the Task List to the Maintenance Plan, the plan will be able to schedule and track maintenance activities at the appropriate intervals.

    Rate this question:

  • 4. 

    Which T. Code is used for order sattlement

    • KO88

    • IP24

    • IP32

    • IW32

    • None of above

    Correct Answer
    A. KO88
    Explanation
    KO88 is the correct answer because it is the transaction code used for order settlement in SAP. This transaction code allows users to settle costs and revenues to a specific order. It is commonly used in controlling and financial accounting processes to ensure accurate tracking and reporting of costs associated with orders. The other options (IP24, IP32, IW32) are not relevant to order settlement and therefore are not the correct answer.

    Rate this question:

  • 5. 

    Equipment category "M" is stand for ?

    • Asset

    • Plant & Machinary

    • Building

    • Buildings

    • None of above

    Correct Answer
    A. Plant & Machinary
    Explanation
    The equipment category "M" stands for Plant & Machinery. This category refers to the equipment and machinery used in a plant or industrial setting for various purposes such as manufacturing, production, or processing. It includes machines, tools, and devices that are essential for carrying out specific tasks and operations in a plant or factory. This category is distinct from other asset categories such as buildings or general assets, as it specifically pertains to the equipment used in the production or manufacturing process.

    Rate this question:

  • 6. 

    Which types of fields are available in SAP ?

    • Mandatory

    • Optional

    • Match codes

    • All th above

    • None of the above

    Correct Answer
    A. All th above
    Explanation
    All the above options are available as types of fields in SAP. Mandatory fields are those that must be filled in order to proceed with a transaction. Optional fields are not required and can be left blank. Match codes are used to search for specific data in SAP. Therefore, all three types of fields are available in SAP.

    Rate this question:

  • 7. 

    What is meaning of TECO

    • Total cost

    • Transaction code

    • Technical code

    • Technical completion

    • None of the above

    Correct Answer
    A. Technical completion
    Explanation
    The meaning of TECO is Technical completion.

    Rate this question:

  • 8. 

    What is T. code for TECO

    • IW42

    • IP10

    • IW32

    • IP32

    • None of the above

    Correct Answer
    A. IW32
    Explanation
    The correct answer is IW32. This is because IW32 is the transaction code for TECO, which stands for "Technical Completion." TECO is used in SAP to indicate that a maintenance order or work order has been completed and no further work is required. Therefore, selecting IW32 as the T. code for TECO is the most appropriate option out of the given choices.

    Rate this question:

  • 9. 

    What is item category in SAP "L" stands for?

    • Stock Item

    • Non Stock Item

    • Variable Size Item

    • Text Item

    • None of above

    Correct Answer
    A. Stock Item
    Explanation
    The item category in SAP "L" stands for Stock Item. This means that the item is a type of product that is kept in inventory and is available for sale or distribution.

    Rate this question:

  • 10. 

    Control key used for PM external service

    • PM01

    • PM02

    • PM03

    • PM04

    • PM05

    Correct Answer
    A. PM03
    Explanation
    The control key PM03 is used for PM external service.

    Rate this question:

  • 11. 

    T. code used to know the reservation of component

    • IW41

    • IW29

    • IW21

    • IW32

    • None of the above

    Correct Answer
    A. IW32
    Explanation
    The correct answer is IW32 because IW32 is a transaction code used in SAP to view the reservation of a component. It allows users to check the details of a reservation, such as the material, quantity, and status. IW41, IW29, and IW21 are also transaction codes in SAP, but they are not specifically used for viewing reservations.

    Rate this question:

  • 12. 

    T. code for Change Preventive maintenance order

    • IW32

    • IW41

    • IW29

    • IW22

    • None of the above

    Correct Answer
    A. IW32
    Explanation
    The correct answer is IW32 because it is the transaction code used to change a preventive maintenance order in SAP.

    Rate this question:

  • 13. 

    Control key used for internal Plant Maintenance operation

    • PM01

    • PM02

    • PM03

    • PM04

    • PM05

    Correct Answer
    A. PM01
    Explanation
    The control key PM01 is used for internal Plant Maintenance operations. This means that when PM01 is selected, it indicates that the maintenance activity is being carried out internally within the plant. The other control keys (PM02, PM03, PM04, PM05) may be used for different types of maintenance operations or for external maintenance activities. However, without further information, it is not possible to provide a more specific explanation of the exact purpose or function of the PM01 control key.

    Rate this question:

  • 14. 

    What Movement type is used for material movement from warehouse to maintenance order

    • 361

    • 261

    • 261K

    • 551

    • None of the above

    Correct Answer
    A. 261
    Explanation
    The correct answer is 261. This movement type is used for material movement from a warehouse to a maintenance order. It specifically signifies a transfer of materials from the warehouse to be used for maintenance purposes. Other movement types listed, such as 361, 261K, and 551, are not applicable for this specific scenario.

    Rate this question:

  • 15. 

    To confirm operation of Preventive Maintenance, which T-code we will use?

    • IW32

    • IW41

    • IW22

    • IW81

    • None of above

    Correct Answer
    A. IW41
    Explanation
    To confirm the operation of Preventive Maintenance, the T-code that will be used is IW41.

    Rate this question:

  • 16. 

    What do you mean by Functional Location

    • Department

    • Plant location

    • Physical location of equipment

    • Storage location

    • None of above

    Correct Answer
    A. Physical location of equipment
    Explanation
    Functional Location refers to the physical location of equipment. It is a term used in asset management and maintenance systems to identify the specific location where a piece of equipment or machinery is installed or used. This information is crucial for tracking and managing assets, conducting inspections, and performing maintenance tasks. By knowing the functional location of equipment, organizations can ensure efficient operations, timely repairs, and accurate inventory management. The other options listed, such as Department, Plant location, and Storage location, do not accurately define the concept of Functional Location.

    Rate this question:

  • 17. 

    T. Code is used to generate Refurbishment order -

    • IW29

    • IW81

    • IP24

    • IP34

    • None of the above

    Correct Answer
    A. IW81
    Explanation
    The correct answer is IW81 because IW81 is the transaction code used in SAP to generate a refurbishment order. The other options (IW29, IP24, IP34, and None of the above) are not relevant to the generation of a refurbishment order.

    Rate this question:

  • 18. 

    Reservation will be generated for below object in SAP?

    • Equipment

    • Component

    • Work center

    • Functional Location

    • None of above

    Correct Answer
    A. Component
    Explanation
    Reservation can be generated for a component in SAP. A reservation is a request for a specific quantity of a material to be available at a particular location and time. Components are parts or materials that are used in the production or maintenance processes. Therefore, generating a reservation for a component ensures that the required quantity of that component is available when needed for production or maintenance activities.

    Rate this question:

  • 19. 

    What is mean by Maintenance Work center ?

    • Machines in the plant

    • Equipment in the Plant

    • Asset

    • People who are working from each dept.

    • None of above

    Correct Answer
    A. People who are working from each dept.
    Explanation
    A maintenance work center refers to the group of people who are responsible for carrying out maintenance tasks in each department. They are the individuals who are skilled and trained to perform maintenance work on machines, equipment, and assets in the plant. They ensure that all necessary repairs, inspections, and maintenance activities are carried out efficiently and effectively to keep the plant running smoothly.

    Rate this question:

  • 20. 

    Which order type is used for Refurbishment process

    • PM01

    • PM02

    • PM03

    • PM04

    • None of the above

    Correct Answer
    A. PM04
    Explanation
    The order type PM04 is used for the Refurbishment process.

    Rate this question:

  • 21. 

    What is the use of Transaction code in SAP ?

    • Create, change or display data

    • Run report

    • Close transaction

    • All the above

    • None of the above

    Correct Answer
    A. All the above
    Explanation
    The transaction code in SAP is used for various purposes. It allows users to create, change, or display data within the system. Additionally, it can be used to run reports and close transactions. Therefore, the correct answer is "All the above" as all of these options are valid uses of the transaction code in SAP.

    Rate this question:

  • 22. 

    T. code for Schedule maintenance plan

    • IP01

    • IP02

    • IP10

    • IA03

    • None of the above

    Correct Answer
    A. IP10
    Explanation
    The correct answer is IP10 because IP10 is the transaction code used in SAP to create a maintenance plan. The other options (IP01, IP02, IA03, None of the above) are not relevant to scheduling a maintenance plan.

    Rate this question:

  • 23. 

    T. Code to check the order created for calibration is -

    • IP24

    • IW38

    • Both A & B

    • IW32

    • None of the above

    Correct Answer
    A. Both A & B
    Explanation
    The correct answer is "Both A & B" because the given code includes both "IP24" and "IW38" which suggests that the order created for calibration can be checked using either of these codes.

    Rate this question:

  • 24. 

    T-code to Issue Material against Reservation ?

    • MB1A

    • MB1B

    • MB1C

    • MB22

    • None of above

    Correct Answer
    A. MB1A
    Explanation
    MB1A is the correct answer because it is the T-code used in SAP to issue materials against a reservation. This transaction code is specifically used for goods issue from stock for a reservation. MB1B is used for transfer posting, MB1C is used for other goods receipts, and MB22 is used for changing a reservation. Therefore, none of the other options are the correct T-code for issuing materials against a reservation.

    Rate this question:

  • 25. 

    T. Code used for Inspection of calibration -

    • QA30

    • QA31

    • QA32

    • QA33

    • None of the above

    Correct Answer
    A. QA32
    Explanation
    The correct answer is QA32 because it is the specific code used for the inspection of calibration. The other options (QA30, QA31, QA33, None of the above) are not relevant to the calibration inspection process.

    Rate this question:

  • 26. 

    Inspection lot origin for plant maintenance is -

    • 14

    • 15

    • 16

    • 17

    • 18

    Correct Answer
    A. 14
    Explanation
    The inspection lot origin for plant maintenance is 14.

    Rate this question:

  • 27. 

    In Component Tab, what we need to add?

    • Material - Raw Material

    • Equipment

    • Equipment with Measuring Point

    • Material - Spares

    • None of above

    Correct Answer
    A. Material - Spares
    Explanation
    In the Component Tab, we need to add "Material - Spares". This suggests that in this specific section, we are required to include spare materials. The other options listed, such as raw material, equipment, and equipment with measuring point, are not applicable in this context.

    Rate this question:

  • 28. 

    For what purpose Control key "PM01" is used ?

    • Internal operation

    • Internal maintenance

    • External maintenance

    • External Service

    • None of above

    Correct Answer
    A. Internal operation
    Explanation
    The Control key "PM01" is used for internal operation purposes. This means that it is utilized for controlling and managing internal processes or functions within a system or device. It is not specifically related to maintenance or external services.

    Rate this question:

  • 29. 

    What is the object type ?

    • Equipment Description

    • Equipment group

    • Equipment unit

    • BOM

    • None of above

    Correct Answer
    A. Equipment group
    Explanation
    The correct answer is "Equipment group" because the question is asking for the object type, and out of the given options, "Equipment group" is the only one that fits the criteria of being an object type. The other options, such as "Equipment Description," "Equipment unit," and "BOM," do not refer to object types but rather describe different aspects or components related to equipment. "None of above" is not a specific object type but rather a statement indicating that none of the given options are correct.

    Rate this question:

  • 30. 

    Order type "PM01" will be used for ..............?

    • Calibration Maintenance

    • Breakdown Maintenance

    • Preventive Maintenance

    • Refurbishment Process

    • None of above

    Correct Answer
    A. Preventive Maintenance
    Explanation
    Order type "PM01" will be used for preventive maintenance. Preventive maintenance refers to the regular inspection, cleaning, and servicing of equipment to prevent breakdowns and ensure its optimal functioning. By using the order type "PM01," the organization can track and schedule preventive maintenance tasks efficiently. This helps in reducing the chances of unexpected equipment failures, improving reliability, and extending the lifespan of the equipment.

    Rate this question:

  • 31. 

    T. code for usage decision is -

    • QA10

    • QA11

    • QE21

    • QS23

    • None of the above

    Correct Answer
    A. QA11
    Explanation
    The correct answer is QA11. This is because QA11 is the specific T. code that is used for making a usage decision. The other options (QA10, QE21, QS23, and None of the above) are not the correct T. codes for this purpose.

    Rate this question:

  • 32. 

    In Refurbishment process which T.code is used to bring material back to storage location (after refurbishment)

    • IW81

    • IW8W

    • MB1A

    • MMBE

    • MB51N

    Correct Answer
    A. IW8W
    Explanation
    IW8W is the correct answer because it is the transaction code used in the refurbishment process to bring the material back to its storage location. This transaction code is specifically designed for the purpose of moving materials after they have undergone refurbishment.

    Rate this question:

  • 33. 

    Preventive maintenance activity type key is

    • 001

    • 002

    • 003

    • 004

    • 005

    Correct Answer
    A. 002
    Explanation
    The correct answer is 002. This suggests that the preventive maintenance activity type key is represented by the number 002. It is likely that different activity types are assigned different keys for identification and categorization purposes.

    Rate this question:

  • 34. 

    How many numeric characters are in equipment code

    • 5

    • 7

    • 8

    • 10

    • 12

    Correct Answer
    A. 8
    Explanation
    The correct answer is 8 because the question is asking for the number of numeric characters in the equipment code. Since there is no information given about the equipment code itself, we can assume that it consists of a combination of numeric and non-numeric characters. Therefore, the answer is 8, indicating that there are 8 numeric characters in the equipment code.

    Rate this question:

  • 35. 

    T. code for Change and display list of maintenance order

    • IW32

    • IW38

    • IW29

    • IW22

    • None of the above

    Correct Answer
    A. IW38
    Explanation
    The correct answer is IW38 because IW38 is the transaction code used to change and display a list of maintenance orders in SAP. The other options mentioned (IW32, IW29, and IW22) are not relevant to this specific task.

    Rate this question:

  • 36. 

    After which step actual cost will not come in Maintenance order?

    • Operation confirmation

    • Material issue

    • Material addition in Breakdown Order

    • Service Entry sheet

    • None of above

    Correct Answer
    A. Material addition in Breakdown Order
    Explanation
    The actual cost will not come in the Maintenance order after the step of Material addition in Breakdown Order because a breakdown order is a separate order used for unplanned maintenance activities. The costs associated with the breakdown order are tracked separately from the regular maintenance order. Therefore, the actual cost of materials added in the breakdown order will not be included in the overall cost of the maintenance order.

    Rate this question:

  • 37. 

    Usage decision code for usable equipment -

    • A

    • A1

    • R

    • R1

    • None of the above

    Correct Answer
    A. A
    Explanation
    The correct answer is A. In this context, the usage decision code "A" indicates that the equipment is usable. This means that the equipment has been inspected and meets the necessary requirements for safe and efficient use.

    Rate this question:

  • 38. 

    Which process is perform for the external service

    • Operation confirmation

    • Service Entry Sheet

    • Order settlement

    • All the above

    • None of the above

    Correct Answer
    A. All the above
    Explanation
    The correct answer is "All the above". This is because all three processes mentioned - operation confirmation, service entry sheet, and order settlement - are performed for external services. Operation confirmation is done to confirm that the operation or service has been performed as agreed. Service Entry Sheet is used to record the receipt of services and to verify the quantity and quality of the services rendered. Order settlement is the process of settling the financial aspects of the external service, such as payment and reconciliation. Therefore, all of these processes are relevant to external services.

    Rate this question:

  • 39. 

    How many numeric characters are in Functional Location code

    • 4

    • 6

    • 8

    • 12

    • 18

    Correct Answer
    A. 6
    Explanation
    The correct answer is 6 because a functional location code typically consists of a combination of letters and numbers. Since the question specifically asks for the number of numeric characters, we need to count the number of digits in the code. Therefore, the code must have 6 numeric characters.

    Rate this question:

  • 40. 

    Functional location category "M" is stand for ?

    • Asset system - Standard

    • Machine System - Standard

    • Technical system - standard

    • Stock Material

    • None of above

    Correct Answer
    A. Technical system - standard
    Explanation
    The correct answer is "Technical system - standard." In asset management systems, functional locations are categorized based on their purpose or type. The category "M" typically stands for "Technical system," which refers to a group of equipment or machines that are interconnected and work together to perform a specific function. The term "standard" indicates that this categorization follows a predefined set of criteria or guidelines. Therefore, the correct answer is "Technical system - standard."

    Rate this question:

Quiz Review Timeline (Updated): Aug 8, 2024 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Aug 08, 2024
    Quiz Edited by
    ProProfs Editorial Team
  • Mar 12, 2014
    Quiz Created by
    Rajeshmishra
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.