ALE Day 2 Design Mixed Bag (Theory, Design, Site Planning)

20 Questions | Total Attempts: 532

SettingsSettingsSettings
Please wait...
ALE Day 2 Design Mixed Bag (Theory, Design, Site Planning)

Architecture is the initial drawing and designing of structures on theory before they are actualized. Ale Day 2 Design Mixed Bag (theory, design and site planning) is an analysis of architecture concepts. Enjoy the learning.


Questions and Answers
  • 1. 
    Under the BP 344, which is not a part, component of a ramp if the length exceeds 6.00m at 1:12 gradient
    • A. 

      Handrails a sides of the ramp with extensions at the start and end of the handrail at 400mm

    • B. 

      Curb at 0.10m height

    • C. 

      Landing after excess of 6.00m of not less than 1.50m

    • D. 

      Level area at 1.80m length at the upper end of the ramp

  • 2. 
    A client has asked a designer to create an intimate seating area for a hospital room. Which of the following is likely to have the greatest impact on achieving the client's goal
    • A. 

      Scale

    • B. 

      Pattern

    • C. 

      Texture

    • D. 

      Color

  • 3. 
    To give a sofa heavy appearance, the designer should use which of the following color combination for the sofa and the surrounding wall
    • A. 

      A hue with a dark value for the sofa and a slightly lighter value for the walls

    • B. 

      A light colored sofa of any hue and dark value wall color

    • C. 

      A sofa with a warm hue and dark value and a much lighter wall color

    • D. 

      A Sofa with light, cool color and wall color of similar value and hue

  • 4. 
    Which color has the tendency of mitigating aggressive behaviour
    • A. 

      Pink

    • B. 

      Violet

    • C. 

      Brown

    • D. 

      Red

  • 5. 
    A good selection to enhance the appearance of a rough, plastered wall would be
    • A. 

      Fluorescent cove up lighting on all four sides of the rom

    • B. 

      Decorative chandeliers near the wall

    • C. 

      Trrack lighting near the center f the room aimed at the wall

    • D. 

      Recessed incandescent close to the wall

  • 6. 
    A parson table primarily uses which of the following types of design elements
    • A. 

      Plane and Volume

    • B. 

      Line and Plane

    • C. 

      Plane and Point

    • D. 

      Volume and Line

  • 7. 
    To create the most vivid color-coding system, the interior designer could create the most easily perceived system by using which of the following combinations
    • A. 

      Either highly saturated warm or cool colors next to a neutral gray

    • B. 

      A bright color against a background of a non-complementary color

    • C. 

      Complementary color of high saturation

    • D. 

      The primary colors and white

  • 8. 
    Which design elements could be used to lower the apparent height of a building
    • A. 

      Strong horizontal lines on the walls

    • B. 

      A dark and highly textured ceiling

    • C. 

      Fine-grained patterns on the ceiling and dark walls

    • D. 

      A light ceiling and textured walls

  • 9. 
    The Prang system organizes colors according to
    • A. 

      Three scales of hue, value and chroma in a three dimensional form

    • B. 

      The hue and value in a matrix system

    • C. 

      Their relationship to the primaries as organized in a circle

    • D. 

      Five principle hues and their values on a wheel

  • 10. 
    Wallpaper is most useful to a designer in creating
    • A. 

      Texture

    • B. 

      Line

    • C. 

      Color

    • D. 

      Scale

  • 11. 
    The base module dimension used in modular coordination is
    • A. 

      100mm

    • B. 

      English

    • C. 

      SI

    • D. 

      Metric

  • 12. 
    Estimate is the performance of this process of a development project
    • A. 

      Quantifiying of materials, labor and cost

    • B. 

      Programming

    • C. 

      Quantity survey

    • D. 

      Forecasting

  • 13. 
    Water proofing for walls is technically termed as
    • A. 

      Water proofing

    • B. 

      Damp proofing

    • C. 

      Integral waterproofing

    • D. 

      Moisture protection

  • 14. 
    Construction joints in walls requiring waterproofing needs
    • A. 

      Integral water proofing

    • B. 

      Sealant

    • C. 

      Water stop

    • D. 

      Expansion joints

  • 15. 
    How many days should a concrete be allowed to cure normally in order to attain its structural strength
    • A. 

      28 days

    • B. 

      14 days

    • C. 

      7 days

    • D. 

      1 day

  • 16. 
    The popular name of an industrialized box building is
    • A. 

      Panel System

    • B. 

      Space Frame

    • C. 

      Skeleton Framing

    • D. 

      Modulor

  • 17. 
    Which type of maps are used to determine erosion potential areas
    • A. 

      Geological and slope maps

    • B. 

      Geological and soil maps

    • C. 

      Slope and Soil Maps

    • D. 

      Geological, slope, and soil maps

  • 18. 
    Which soil type has the lowest bearing capacity
    • A. 

      Silt

    • B. 

      Clayey Sand

    • C. 

      Silty Gravel

    • D. 

      Clay

  • 19. 
    This terrain is indicated by lines closer at the bottom of a slope and wide apart at the top
    • A. 

      Convex Slope

    • B. 

      Concave Slope

    • C. 

      Cliff

    • D. 

      Rolling slope

  • 20. 
    What is the minimum desirable grade for parking (concrete surface)
    • A. 

      1.0%

    • B. 

      2.0%

    • C. 

      0.5%

    • D. 

      0%

Back to Top Back to top