F-60 City Of New York Fire Department. Fire Guard F-60 English And Spanish (First 37 Questions Only)

The statement is saying that in the event of a fire, the FDNY (Fire Department of New York) must be notified. This means that it is necessary to inform the FDNY whenever there is a fire. Therefore, the correct answer is true.

The statement is true because it states that trained Certificate of Fitness holders should only consider extinguishing fires that are limited in size and spread and can be easily extinguished using a portable fire extinguisher. This implies that the trained individuals should not attempt to extinguish fires that are too large or spreading rapidly, as they may require more advanced firefighting equipment or professional assistance.

The picture is correct.

The given picture is correct.

The picture is correct because the statement "El dibujo esta correcto" translates to "The drawing is correct" in English. Therefore, the answer "True/Correcto" indicates that the picture is indeed correct.

This is an example of a 100 lbs / 100 libras extinguisher size.

The given statement is true. A fire guard is a person who holds a Certificate of Fitness and is trained in maintaining a fire watch and performing fire safety duties as prescribed by the commissioner. This means that they are responsible for ensuring fire safety measures are in place and taking appropriate action in case of a fire emergency.

The owner of the premises must be notified in writing by the citywide permit holder at least 48 hours before the hot work is to be started. This allows the owner to be aware of the upcoming hot work operation and make any necessary preparations or arrangements. It also ensures that the owner has sufficient time to address any concerns or issues related to the hot work operation before it begins.

The correct answer is monthly because extinguishers need to be inspected on a regular basis to ensure they are in proper working condition and ready to be used in case of a fire. Monthly inspections allow for any potential issues or malfunctions to be identified and addressed promptly, reducing the risk of failure during an emergency situation. Regular inspections also help to comply with safety regulations and maintain a safe environment.

The correct answer is "not have / no tienen". This means that the persons conducting a fire watch should not have any other duties. They should solely focus on their responsibilities as a fire watch and not be assigned any additional tasks.

The distance to the roof and to the sides is 11m/35 feet or 11 metros/35 pies.

If the screen on your computer terminal freezes during your examination, you should ask for help from the examiner in the testing room. They are responsible for overseeing the examination and ensuring that everything runs smoothly. They would be the most appropriate person to assist you with any technical issues you may encounter during the exam. Asking the person next to you may not be helpful as they may not have the knowledge or authority to address the problem. The firefighters would not be relevant in this situation, and the computer help desk may not be accessible or available during the examination.

The first inspection for any CNG or LPG torch operation should be conducted 30 minutes after completion of the torch operations. The second inspection should be conducted 1 hour after completion of the torch operations.

The correct answer is "Pull / tirar" because in the P.A.S.S. acronym, the letter P stands for pulling the pin on a fire extinguisher. This action is necessary to activate the extinguisher and release the extinguishing agent.

If you do not know the answer to a question while taking an examination, you should not ask about test questions since FDNY staff cannot assist applicants.

This statement is true because it states that all persons performing hot work requiring a permit must possess a permit that specifically authorizes them to do such work. This means that anyone who is involved in hot work activities must have a permit that is specific to the site where the work is being performed or a citywide permit that allows them to perform hot work in any location within the city.

This is an example of a 20 lbs/20 libras extinguisher size.

The hot work area refers to the specific location where activities involving sparks, hot slag, radiant heat, or convective heat are taking place as a result of hot work. This could include welding, cutting, grinding, or any other processes that generate heat and sparks. It is important to identify and designate these areas to ensure proper safety measures are in place to prevent fires, explosions, or other hazards associated with hot work.

Yes, an additional F-60 fire guard is required to perform fire watch on the floor below if the torch operation is being conducted at or near the edge of an unenclosed floor of a building, or near a floor opening, or other location where sparks and slag may travel to one or more lower floors or levels. This is necessary to ensure the safety of the lower floors and prevent any potential fire hazards.

The fire watch must continue for a minimum of 30 minutes after the conclusion of the work. This means that even after the work is finished, the fire watch personnel must remain on-site for an additional 30 minutes to ensure that there are no potential fire hazards or risks. This is important as it allows for any smoldering or hidden fires to be detected and dealt with promptly, reducing the chances of a fire outbreak after the work is completed.

Fire guards must be on continuous duty during all torch operations on the roof of a building to ensure the safety of the building and its occupants. Torch operations involve the use of open flames, which can easily cause fires if not properly monitored. Having fire guards present helps to prevent accidents and quickly respond to any potential fire hazards. Therefore, it is necessary for fire guards to be on duty during all torch operations on the roof of a building.

This is a monthly inspection record. It is used to keep track of inspections that are conducted on a monthly basis.

A responsible person, designated by the owner of a building or structure, implements a hot work program to oversee and issue authorizations for hot work. This program aims to prevent fire and fire spread.

The statement suggests that the given permit is a permanent FDNY permit, but the correct answer is false. This means that the permit is not a permanent FDNY permit.

Only reference material provided by the FDNY is allowed to be used/displayed while taking a Certificate of Fitness examination at 9 Metro Tech Center. Cellular phones, study material booklets, and mp3 players are not allowed.

The correct answer is False because a safe hot work area requires specific precautions to be taken to ensure safety. Hot work areas must be properly ventilated, have fire extinguishing equipment nearby, and be free of flammable materials. Additionally, workers should be trained in hot work safety procedures and wear appropriate protective gear. Therefore, simply stating "Safe hot work area and precautions" does not accurately describe the necessary precautions, making the answer False.

A responsible person is someone who has been trained in fire safety hazards associated with hot work and is designated by the owner of a premises to authorize the performance of hot work. This person is responsible for ensuring that the necessary and appropriate measures are taken to minimize these hazards. They play a crucial role in maintaining fire safety during hot work activities.

The authorizations for hot work programs, which permit welding or other hot work at a location, are issued by the responsible person. This individual is responsible for ensuring that all necessary precautions are taken to prevent fires and maintain safety during hot work activities. The responsible person may be a supervisor, manager, or designated individual with the authority to grant such authorizations.

The given question is asking whether something is unacceptable. The correct answer is "True" which means that it is indeed unacceptable.

A pre-hot work check must be conducted at least once per day to ensure safety and prevent any potential accidents or hazards. This check is necessary before starting any hot work activities to assess the work area, equipment, and conditions, and to implement any necessary safety measures. Conducting this check helps to identify and address any potential risks or issues that could arise during the hot work process.

The statement is true because it is important to have at least one multi-purpose portable fire extinguisher with a minimum 3-A 40-B:C rating for roofing operations that involve heat-producing systems or other ignition sources. This is necessary to ensure the safety of the workers and to be prepared in case of a fire emergency.

The correct answer is C of F. The explanation is that the "holder" of something is the person who possesses or owns that thing. In this case, the "holder" is recommended to be trained in the use of a portable fire extinguisher. Therefore, the correct answer is C of F, which means "holder of fire extinguisher."

This question is asking for the type of sign being described. The correct answer is "warning."

The correct answer is A: cloth, B: Paint: C: electrical equipment, D: combustible metal alloys, K: Animal fats. This is because these materials are examples of different types of fires. Cloth and paint are examples of Class A fires, which involve ordinary combustible materials. Electrical equipment is an example of a Class C fire, which involves energized electrical equipment. Combustible metal alloys represent Class D fires, which involve combustible metals. Animal fats represent Class K fires, which involve cooking oils and fats.

NFPA stands for National Fire Protection Association. The organization is responsible for developing and maintaining fire protection and prevention standards in the United States. They provide guidelines and codes to ensure the safety of people and property from fire hazards. The correct answer is National Fire Protection Association.

The incorrect statements are "Construction sites/Sitio de construccion" because the fire watch for torch operations is required at construction sites, "In any building or structure, when the torch operation is conducted by a person holding a citywide permit for torch operations" because the fire watch is required regardless of the permit held by the person conducting the torch operation, and "On any rooftop, or in connection with any torch-applied roofing system operation" because the fire watch is required during torch-applied roofing system operations.

Partitions segregating hot work areas from other areas of the building should be of noncombustible construction. This means that the partitions should be made of materials that are resistant to burning, such as concrete, brick, or metal. Using noncombustible construction helps to minimize the risk of fire spreading from the hot work areas to other parts of the building, ensuring the safety of the occupants and the property.

The correct answer is A. The month of inspection will be punched on the permit sticker, indicating when the vehicle was last inspected. B. The year that the permit expires will also be displayed on the sticker, indicating when the permit will need to be renewed.

Magnesium, titanium, and metallic sodium can cause class D fires because they are highly reactive metals that can ignite and burn at high temperatures. These metals can react with oxygen in the air and produce intense heat and flames. Calcium, zinc, and aluminum are not typically classified as class D fire hazards because they do not have the same level of reactivity as magnesium, titanium, and metallic sodium.

Hot work operations involving cutting or welding should be conducted at least 35 feet away from combustible materials and combustible waste, or appropriate shielding should be provided to prevent sparks, slag, or heat from igniting exposed combustibles. This distance or shielding is necessary to ensure the safety of the work environment and prevent the risk of fire or explosions caused by the heat or sparks generated during the hot work operations.

The correct answer states that all persons conducting hot work operations or performing fire watch shall be trained in the use of portable fire extinguishers, and they shall be capable of extinguishing fires when they are limited in size and spread such that they can readily be extinguished using a portable fire extinguisher. This means that individuals involved in hot work operations or fire watch must have the necessary training to effectively use a portable fire extinguisher to extinguish fires that are small and contained enough to be put out using such equipment.

The additional F-60 fire guard is required in these three situations because they all involve potential fire hazards. When a torch operation is being conducted at or near the edge of an unenclosed floor, there is a risk of sparks or slag falling to lower floors. Similarly, when the torch operation is near a floor opening, there is a possibility of sparks or slag traveling through the opening and causing a fire on lower floors. Lastly, in any other location where sparks and slag may travel to lower floors, a fire guard is needed to prevent the spread of fire.

Each person must operate only one gas torch at a time and such torch must not be left unattended while ignited. This is a safety precaution to prevent accidents and ensure that the person operating the torch can fully focus on its operation without any distractions. Operating multiple torches at once can increase the risk of accidents and make it difficult for the operator to effectively control and monitor each torch. Therefore, it is important to follow the precaution of using only one torch at a time and not leaving it unattended while ignited.

A temporary fire watch is a measure that is put in place for a limited period of time to ensure constant monitoring and surveillance of a building or specific area. This is typically done by qualified individuals who are responsible for identifying and controlling fire hazards, detecting early signs of fire, raising an alarm, and notifying the fire department if necessary. Unlike permanent or automatic measures, a temporary fire watch is only implemented for a specific duration and is not a long-term solution.

The monthly inspection record must be attached to the extinguisher and the inspection checklist must be maintained on file. This ensures that the record is easily accessible and visible in case of an emergency, and also allows for proper documentation and record-keeping of the inspections conducted.

A hot work program authorization is required for any project involving hot work operations. The authorization is not issued by the FDNY, but it must be signed and issued by the responsible person. It must also be available for any representative of the Fire Department during the work and for 48 hours after the work is complete.

Portable LPG containers and CNG containers are highly flammable and can pose a safety risk if stored, handled, or used indoors/roof. Therefore, it is prohibited to have them in residential occupancies, factory and industrial occupancies, educational occupancies, and institutional occupancies, as stated in the building code. The other options, such as airport and libraries, concert halls, swimming pools and beaches, are not mentioned in the building code as prohibited areas for storing or using these containers.

exposures that are not observable by a single individual REQUIRES additional personnel

All doors of such enclosure HAVE TO BE fireproof and self-closing.