Certified Welding Inspector Cwi Part A Fundamentals Chapter 1 Welding Inspection And Certification Practice Test

30 Questions

Settings
Please wait...
Certified Welding Inspector Cwi Part A Fundamentals Chapter 1 Welding Inspection And Certification Practice Test

The quiz is over requirements and responsibilities of certified welding inspector (CWI)


Questions and Answers
  • 1. 
    There is an increasing need for weld quality because of?
    • A. 

      Safety

    • B. 

      Economics

    • C. 

      Less conservative design

    • D. 

      Government regulations

    • E. 

      All of the above

  • 2. 
    The rules for CWI certification program is found in what document?
    • A. 

      AWS 5.5

    • B. 

      AWS D1.1

    • C. 

      AWS QC1

    • D. 

      AWS 5.1

    • E. 

      AWS 14.1

  • 3. 
    Weld quality control should only begin after welding has been started.
    • A. 

      True

    • B. 

      False

  • 4. 
    What three welding inspector certifications are discussed in AWS QC1?
    • A. 

      CAWI, CWI, BWI

    • B. 

      CWI, CAWI, SCWI

    • C. 

      SCWI, CWI, ACWI

    • D. 

      Levels I, II, and III

    • E. 

      None of the above

  • 5. 
    What is the most important quality of a welding inspector?
    • A. 

      Graduation from a welding vocational program

    • B. 

      An engineering degree

    • C. 

      An associates degree

    • D. 

      Professional attitude

    • E. 

      Hold a certified welder certificate

  • 6. 
    What is the vision requirements for a CWI are near vision acuity on:
    • A. 

      Jaeger J1 at not less than 24 in

    • B. 

      Jaeger J2 at not less than 12 in

    • C. 

      Jaeger J2 at not less than 12 in, with or without corrective lenses

    • D. 

      The inspector cannot wear glasses

    • E. 

      20/20 vision

  • 7. 
    Acronym KASH stands for:
    • A. 

      Knowledge, attitude, skills, and habits

    • B. 

      Knowledge, application, skills, and habits

    • C. 

      Knowledge, attitude, skills, and honesty

    • D. 

      Knowledge, application, skills, and honesty

    • E. 

      Knowledge, attitude, sincerity, and honesty

  • 8. 
    CWI’s should have a basic understanding of:
    • A. 

      Welding processes

    • B. 

      Nondestructive testing methods

    • C. 

      A and b above

    • D. 

      Codes and standards

    • E. 

      All of the above

  • 9. 
    A delay in the production schedule to permit inspection is:
    • A. 

      NDE

    • B. 

      Hold point

    • C. 

      Preinspection

    • D. 

      Reference point

    • E. 

      Arc strike

  • 10. 
    How do you correct an Inspection report?
    • A. 

      Rewriting the entire report

    • B. 

      Reporting the correction to the welding foreman

    • C. 

      Telling the welder what was done

    • D. 

      Ignoring the original error

    • E. 

      Single-line out the error, correct the error, date, and initial

  • 11. 
    Ethics is:
    • A. 

      Using common sense and honesty

    • B. 

      Living by the rules

    • C. 

      Being fair and impartial

    • D. 

      Basing decisions on facts

    • E. 

      All of the above

  • 12. 
    In order for communications to be effective, it should form a “continuous loop”
    • A. 

      True

    • B. 

      False

  • 13. 
    Welding Inspectors must often communicate with who:
    • A. 

      Welders

    • B. 

      Supervisors

    • C. 

      Welding engineers

    • D. 

      Members of management

    • E. 

      All of the above

  • 14. 
    NDE personnel (other than CWI’s) are routinely certified to what document?
    • A. 

      AWS QC1

    • B. 

      AWS D1.1

    • C. 

      API 1104

    • D. 

      ASNT SNT-TC-1A

    • E. 

      Certification is not needed

  • 15. 
    You must have a high school diploma to become a CWI or you would be denied your certification.
    • A. 

      True

    • B. 

      False

  • 16. 
    The CWI exam consist of what parts?
    • A. 

      Fundamentals, practical, code

    • B. 

      Fundamentals, basic, code

    • C. 

      Basic, vision test, fundamental

    • D. 

      Code, vision test, practical

    • E. 

      None of the above

  • 17. 
    You must use AWS D1.1 Code for the Part C open book code test.
    • A. 

      True

    • B. 

      False

  • 18. 
    The CWI exam contains three parts (Part A, B and C).
    • A. 

      True

    • B. 

      False

  • 19. 
    AWS standard A3.0 covers:
    • A. 

      Filler Metal Specifications

    • B. 

      Standard Welding Terms and Definitions

    • C. 

      Guide to CWI Certification

    • D. 

      Requirements for CWI Certification

    • E. 

      None of the above

  • 20. 
    API Standard 1104 covers the fabrication of bridges and buildings.
    • A. 

      True

    • B. 

      False

  • 21. 
    Some of the approved codes/standards for the Part C open book of the CWI exam are AWS D1.1, API 1104, AWS D1.5, and AWS D15.1.
    • A. 

      True

    • B. 

      False

  • 22. 
    Before starting a job assignment, the welding inspector should have an understanding:
    • A. 

      What code, standard, or specification applies

    • B. 

      What inspections should be conducted

    • C. 

      When inspections should be conducted

    • D. 

      Where records are maintained

    • E. 

      All of the above

  • 23. 
    The CWI certificate does not state what code the inspector used on the examination, rather the CWI is qualified to use any code.
    • A. 

      True

    • B. 

      False

  • 24. 
    To successfully complete the CWI examination, individuals must pass all three parts with at least:
    • A. 

      70%

    • B. 

      72%

    • C. 

      75%

    • D. 

      78%

  • 25. 
    If you make a 72 on Part A, 78 on Part B, 70 on Part C (you must retake which part)?
    • A. 

      Part A

    • B. 

      Part B

    • C. 

      Part C

    • D. 

      All the above

  • 26. 
    If you make a 72 on Part A, 60 on Part B, 78 on Part C (you must retake which part)?
    • A. 

      Part A

    • B. 

      Part B

    • C. 

      Part C

    • D. 

      All the above

  • 27. 
    AWS D1.1
    • A. 

      The AWS Bridge Welding Code

    • B. 

      The AWS Railroad Welding Specification for Cars and Locomotives.

    • C. 

      The AWS Structural Welding Code-Steel

    • D. 

      The AWS Standard Welding Terms and Definitions

  • 28. 
    AWS D1.5
    • A. 

      The AWS Bridge Welding Code

    • B. 

      The AWS Railroad Welding Specification for Cars and Locomotives.

    • C. 

      The AWS Structural Welding Code-Steel

    • D. 

      The AWS Standard Welding Terms and Definitions

  • 29. 
    AWS D15.1
    • A. 

      The AWS Bridge Welding Code

    • B. 

      The AWS Railroad Welding Specification for Cars and Locomotives.

    • C. 

      The AWS Structural Welding Code-Steel

    • D. 

      The AWS Standard Welding Terms and Definitions

  • 30. 
    API 1104
    • A. 

      Bridge Welding Code

    • B. 

      Railroad Welding Specification for Cars and Locomotives.

    • C. 

      Structural Welding Code-Steel

    • D. 

      Standard Welding Terms and Definitions

    • E. 

      Welding of Pipelines and Related Facilities