FSG 2017- Darshan-1
- 1.
What is the maximum allowed length of the video for video submission?
- A.
35 secs
- B.
45 secs
- C.
50 secs
- D.
60 secs
- E.
55 secs
- F.
40 secs
Correct Answer
B. 45 secs -
- 2.
What should be the minimum thickness of a 30 mm outer diameter tube used for front bulkhead ?
- A.
0.9 mm
- B.
1.1 mm
- C.
1.2 mm
- D.
1.37 mm
- E.
1 mm
Correct Answer
C. 1.2 mm -
- 3.
The minimum dimensions of the sample used for perimeter shear testing should be:
- A.
150 x 150 mm
- B.
200 x 200 mm
- C.
275 x 500 mm
- D.
100 x 100 mm
- E.
250 x 500 mm
Correct Answer
D. 100 x 100 mm -
- 4.
What is the area of the cockpit internal cross section template neglecting the slot for steering column?
- A.
110055 sq.mm
- B.
109432 sq.mm
- C.
109810 sq.mm
- D.
109646 sq.mm
- E.
109465 sq.mm
Correct Answer
D. 109646 sq.mm -
- 5.
Which of the following is incorrect?
- A.
Width of shoulder harness must be 75 mm minimum
- B.
A 5 point harness system is not allowed
- C.
Y type shoulder belts are not allowed
- D.
Lap belts with pull down adjusters are recommended
- E.
50 mm wide shoulder harness is allowed when HANS device is used.
Correct Answer
D. Lap belts with pull down adjusters are recommended -
- 6.
Fire resistant shoes must comply with the following specification:
- A.
SFI 3- 2A/5
- B.
SFI 31.2/2005
- C.
FIA standard 8853-2000
- D.
SFI 3.3
- E.
FIA standard 8856-2000
Correct Answer
D. SFI 3.3 -
- 7.
Which of the following is not true for noise test?
- A.
Max sound level at idle should be 103 dbc
- B.
driver will be sitting inside the car while the test is performed
- C.
if exhaust has more than one outlets, higher reading is taken
- D.
Car will be on wheels and in completely static condition.
Correct Answer
D. Car will be on wheels and in completely static condition. -
- 8.
What is the skidpad score for a team with timing 5.3 secs while the fastest vehicle takes 4.775 secs to complete the run ?
- A.
33.7
- B.
39.8
- C.
42.5
- D.
34.1
- E.
40.33
- F.
35.7
Correct Answer
D. 34.1 -
- 9.
Which of the following cannot be done during driver change?
- A.
Change pedal positions
- B.
Change head restraint
- C.
Operate kill switch
- D.
Change tyres
- E.
None of the above
Correct Answer
E. None of the above -
- 10.
One extra member entering the driver change area will lead to ?
- A.
1 min time penalty
- B.
2 min time penalty
- C.
DNF
- D.
-20 points for endurance event
- E.
3 min penalty
Correct Answer
B. 2 min time penalty -
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Jan 09, 2017Quiz Edited by
ProProfs Editorial Team -
Dec 15, 2016Quiz Created by
Darshanpatel
Back to top