Ulangan Harian Teknologi Layanan Jaringan Kelas Xi Tkj
Questions and Answers
- 1.
Nomer yang bisa di hubungi pada setiap ip phone disebut sebagai
- A.
Number 1001
- B.
Number 1002
- C.
Number 1003
- D.
Dial number
- E.
Auto assign
Correct Answer
D. Dial numberExplanation
The correct answer is "dial number" because it refers to the number that can be dialed on an IP phone to make a call. It is the specific number that is assigned to each IP phone for making outgoing calls. This option accurately describes the function and purpose of the number in question.Rate this question:
-
- 2.
Perintah untuk menentukan maksimal nomer telpon yang bisa di gunakan hanya 2 adalah
- A.
Max-dn 2
- B.
Max-ephones 3
- C.
Max-ephones 2
- D.
Number 1002
- E.
Max-dn 3
Correct Answer
A. Max-dn 2Explanation
The correct answer is "max-dn 2" because the command "max-dn 2" sets the maximum number of directory numbers (DN) that can be used to 2. This means that only 2 phone numbers can be assigned and used in the system. The other commands mentioned, such as "max-ephones 3" and "max-ephones 2", are not relevant to setting the maximum number of telephone numbers. The command "number 1002" is also unrelated to setting the maximum number of phone numbers. The command "max-dn 3" sets the maximum number of directory numbers to 3, which is not the correct answer.Rate this question:
-
- 3.
Perintah untuk menentukan maksimal ip phone yang bisa di gunakan hanya 4 adalah
- A.
Max-dn 4
- B.
Max-dn 3
- C.
Max-ephones 4
- D.
Max-ephones 3
- E.
Number 1004
Correct Answer
C. Max-epHones 4Explanation
The correct answer is "max-ephones 4". This command is used to determine the maximum number of IP phones that can be used, and in this case, it is set to 4.Rate this question:
-
- 4.
Perintah ip address 192.168.1.1 255.255.255.0 adalah memberikan ip address kepada router secara
- A.
Static
- B.
Dynamic
- C.
Dhcp server
- D.
Dhcp client
- E.
Exclude
Correct Answer
A. StaticExplanation
The command "ip address 192.168.1.1 255.255.255.0" is used to manually assign a static IP address to a router. This means that the router will always use the specified IP address (192.168.1.1) and subnet mask (255.255.255.0) and it will not change dynamically.Rate this question:
-
- 5.
Perintah untuk mengaktifkan konfigurasi ip pada router adalah
- A.
Ip address
- B.
Int fastethernet 0/0
- C.
Exit
- D.
Config terminal
- E.
No shutdown
Correct Answer
E. No shutdownExplanation
The given command "no shutdown" is used to activate or enable a specific interface on a router. In this case, it is being used to activate the configuration of the IP address on the "fastethernet 0/0" interface of the router. By issuing the "no shutdown" command, the interface will be brought up and start functioning, allowing for the IP configuration to take effect.Rate this question:
-
- 6.
Perintah default-router 192.168.1.1 digunakan untuk menentukan alamat apa?
- A.
Switch
- B.
Hub
- C.
Bridge
- D.
Gateway
- E.
Broadcast
Correct Answer
D. GatewayExplanation
The command "default-router 192.168.1.1" is used to specify the default gateway address. In a network, the default gateway is the device that connects the network to other networks or the internet. It is responsible for routing the network traffic to the appropriate destination. Therefore, the correct answer is "gateway".Rate this question:
-
- 7.
Berapakah ip terakhir yang akan di pinjamkan ke client dari perintah berikut option 25 ip 192.168.0.192
- A.
192.168.0.255
- B.
192.168.0.215
- C.
192.168.0.216
- D.
192.168.0.217
- E.
192.168.0.271
Correct Answer
D. 192.168.0.217Explanation
The given question provides the IP address range as "192.168.0.192/25". This means that the subnet mask is 255.255.255.128 (/25 indicates that the first 25 bits are network bits and the remaining 7 bits are host bits). The last IP address that can be assigned to a client in this range is the broadcast address, which is the highest address in the subnet. In this case, the broadcast address is "192.168.0.255". Therefore, the correct answer is "192.168.0.255".Rate this question:
-
- 8.
Dari mode user exec jika hendak masuk ke mode privilidge maka perintahnya adalah
- A.
Eng
- B.
Enable
- C.
Em
- D.
Conf
- E.
Config terminal
Correct Answer
B. EnableExplanation
To enter the privilege mode from the user exec mode, the correct command is "enable". This command allows the user to access the privileged mode, which provides higher levels of access and control over the device's configuration and management.Rate this question:
-
- 9.
VoIP adalah Voice…………..Internet Protocol
- A.
On
- B.
Off
- C.
Over
- D.
Or
- E.
Offer
Correct Answer
C. OverExplanation
The correct answer is "over" because VoIP stands for Voice over Internet Protocol, which refers to the technology that allows voice communication over the internet.Rate this question:
-
- 10.
Berikut alat yang tidak dibutuhkan dalam topologi VoIP
- A.
Router 2811
- B.
Router 2881
- C.
Switch 2960
- D.
Ip phone
- E.
Modem
Correct Answer
B. Router 2881Explanation
The correct answer is "router 2881" because the question asks for the device that is not needed in a VoIP topology. A VoIP (Voice over Internet Protocol) system allows for voice communication over an IP network, such as the internet. In this case, routers are necessary for routing voice traffic over the network. However, the router model "2881" is not a valid or commonly used router model, so it is not needed in a VoIP topology.Rate this question:
-
- 11.
Protocol yang digunakan oleh VoIP adalah
- A.
SIP
- B.
TCP
- C.
UDP
- D.
IP
- E.
PBX
Correct Answer
A. SIPExplanation
SIP (Session Initiation Protocol) is the protocol used by VoIP (Voice over Internet Protocol) to establish, modify, and terminate multimedia sessions. It is responsible for initiating and terminating voice and video calls, as well as enabling other communication features such as instant messaging and presence information. SIP operates at the application layer of the TCP/IP protocol stack and uses UDP or TCP for transport. It is widely used in VoIP systems and devices for its ability to handle signaling and control functions efficiently.Rate this question:
-
- 12.
Layanan dalam router yang menghandle komunikasi antar ip phone
- A.
PBX
- B.
CME
- C.
SIP
- D.
Straight
- E.
Exclude
Correct Answer
B. CMEExplanation
CME stands for Cisco CallManager Express, which is a feature in Cisco routers that provides call processing for IP phones. It handles the communication between IP phones by providing call control, call routing, and other telephony features. Therefore, CME is the correct answer as it is a service within the router that handles communication between IP phones.Rate this question:
-
- 13.
Ip address yang tidak dipinjamkan ke client akan di masukkan ke dalam kelompok apa?
- A.
Dhcp
- B.
Exclude
- C.
Default router
- D.
Gateway
- E.
Auto assign
Correct Answer
B. ExcludeExplanation
The given correct answer is "exclude" because when configuring DHCP (Dynamic Host Configuration Protocol), the IP addresses that are not to be assigned to clients are placed in the "exclude" group. This ensures that these specific IP addresses are not included in the pool of available addresses for client assignment.Rate this question:
-
- 14.
Perintah ping berada pada level mode apa?
- A.
Exec
- B.
Privilidge
- C.
Global
- D.
Root
- E.
Guest
Correct Answer
A. ExecExplanation
The correct answer is "exec". The "exec" mode is a level mode in which the "ping" command is available. In this mode, users have the highest level of access and can execute privileged commands and perform administrative tasks on the system.Rate this question:
-
- 15.
Salah satu pertimbangan penggunaan VoIP adalah
- A.
Modern
- B.
Biaya telpon
- C.
Rumit
- D.
Kekinian
- E.
Mahal
Correct Answer
B. Biaya telponExplanation
VoIP (Voice over Internet Protocol) is a technology that allows users to make phone calls over the internet instead of using traditional telephone lines. One of the considerations of using VoIP is the cost of telephone calls. Compared to traditional phone services, VoIP often offers lower costs for long-distance and international calls. This is because VoIP utilizes the internet infrastructure, which can be more cost-effective than traditional phone networks. Therefore, "biaya telpon" (telephone costs) is a relevant consideration when deciding to use VoIP.Rate this question:
-
- 16.
Untuk keluar dari mode tertentu digunakan perintah
- A.
En
- B.
Enable
- C.
Exit
- D.
Out
- E.
Logoff
Correct Answer
C. ExitExplanation
The correct answer is "exit" because it is the command used to exit or terminate a specific mode in a system or program. It is commonly used in command-line interfaces or programming environments to go back to the previous level or exit the current mode.Rate this question:
-
- 17.
IP phone di konfigurasi melalui
- A.
Switch
- B.
Hub
- C.
Ip phone
- D.
Router
- E.
Gateway
Correct Answer
D. RouterExplanation
IP phones are typically configured through a router. Routers are networking devices that connect different networks together and manage the traffic between them. They have the capability to assign IP addresses to devices on the network and provide the necessary routing protocols for communication. Therefore, it makes sense that IP phones, which rely on IP addresses for communication, would be configured through a router. Switches and hubs are used for connecting devices within a network, but they do not have the same routing capabilities as a router. A gateway is a device that connects different types of networks together, but it is not typically involved in the configuration of IP phones.Rate this question:
-
- 18.
Perintah ip source-address 192.168.1.1 port 2000 menunjukkan bahwa port komunikasi yang digunakan yaitu
- A.
192
- B.
168
- C.
1
- D.
2000
- E.
150
Correct Answer
D. 2000Explanation
The given command "ip source-address 192.168.1.1 port 2000" indicates that the communication port being used is 2000.Rate this question:
-
- 19.
Agar komunikasi voice dan data bisa teratur maka perlu di buat…
- A.
Voice
- B.
Vlan
- C.
Voip
- D.
Router
- E.
Switch
Correct Answer
B. VlanExplanation
To ensure smooth communication between voice and data, it is necessary to create VLANs. VLANs (Virtual Local Area Networks) allow network administrators to separate and prioritize different types of traffic, such as voice and data, within a network. By creating separate VLANs for voice and data, network congestion and interference can be minimized, resulting in improved quality and reliability of voice communication.Rate this question:
-
- 20.
Rentang ip address yang akan diberikan ke client disebut dengan
- A.
Dhcp
- B.
Exclude
- C.
Default router
- D.
Gateway
- E.
Pool
Correct Answer
E. PoolExplanation
The correct answer is "pool". In a DHCP (Dynamic Host Configuration Protocol) network, a pool refers to the range of IP addresses that will be assigned to clients. The DHCP server manages this pool and assigns IP addresses from it to clients when they connect to the network.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Jan 26, 2019Quiz Created by
Mochamad Sirodjudin
Sekolah Global Mandiri - Wilayah Negara Kesatuan Republik Indonesia
Sekolah Global Mandiri - Wilayah Negara Kesatuan Republik Indonesia
Seleksi Penerimaan Mahasiswa Baru Poltekkes Hermina Tahun 2020
Seleksi Penerimaan Mahasiswa Baru Poltekkes Hermina Tahun 2020
Back to top