Map Tags & Automarks
-
Identify the different types of Tape Measures which can be placed in an Array Study. i. Surface Tape Measure ii. Straight Line Tape Measure iii. Radial Tape Measure
-
I, ii is CORRECT & iii is INCORRECT
-
I, ii is INCORRECT & iii is CORRECT
-
None of the above is CORRECT
-
All of the above is CORRECT
-
This quiz assesses knowledge on mapping technologies used in medical settings, focusing on the types of Tape Measures in Array Studies, placement of Map Tags, and the use of EnGuide Shadow. It is designed to test understanding of technical specifications and operational standards.
(84).webp "Map Tags & Automarks - Quiz")
Quiz Preview
- 2.
Which of the Map Tags mentioned below can be considered to be placed as Surface Map Tags
-
Lesions
-
Labels
-
Shadows
-
Automarks
-
Radial Tape Measure
Correct Answer(s)
A. Lesions
A. Labels
A. Radial Tape MeasureExplanation
The Map Tags that can be considered as Surface Map Tags are Lesions, Labels, and Radial Tape Measure. Lesions and Labels are commonly used to mark specific areas or features on a surface map, while the Radial Tape Measure is used to measure distances or lengths on the surface. These tags provide valuable information and help in accurately representing and analyzing the surface map data.Rate this question:
-
- 3.
EnGuide Shadow can be placed when few electrodes of that EnGuide is sheathed.
-
True
-
False
Correct Answer
A. TrueExplanation
EnGuide Shadow can be placed when few electrodes of that EnGuide is sheathed. This statement is true because EnGuide Shadow is a device that can be inserted into the body to guide the placement of medical electrodes. It is designed to be used when only a few electrodes of the EnGuide system are covered or protected by a sheath. Therefore, the statement is correct.Rate this question:
-
- 4.
EnGuide Shadows can be placed only as a muted color of the EnGuide.
-
True
-
False
Correct Answer
A. TrueExplanation
Shadows in EnGuide can only be placed as a muted color of EnGuide. This means that the shadows should be in a toned-down or subdued shade of the EnGuide color. This restriction ensures that the shadows blend well with the overall design and do not overpower the main color scheme. Therefore, the statement is true.Rate this question:
-
- 5.
Identify the correct statement (s) pertaining to the Projection Distance.
-
When Map Tags, Automarks & Mapping Points are not within the projection distance of EnSite Model they don’t project onto the EnSite Model.
-
When Map Tags, Automarks & Mapping Points are within the projection distance of the EnSite-DIF Fused Model they don’t project onto the DIF Model if Project on DIF is not enabled.
-
When Map Tags, Automarks & Mapping Points are within the projection distance of the EnSite-DIF Fused Model they project onto the EnSite Model if Project on DIF is enabled.
-
Mapping Points saved with 'No Location' information are projected only onto DIF model when they are within the Projection distance.
Correct Answer(s)
A. When Map Tags, Automarks & Mapping Points are not within the projection distance of EnSite Model they don’t project onto the EnSite Model.
A. When Map Tags, Automarks & Mapping Points are within the projection distance of the EnSite-DIF Fused Model they don’t project onto the DIF Model if Project on DIF is not enabled.Explanation
The correct statement states that when Map Tags, Automarks & Mapping Points are not within the projection distance of EnSite Model, they do not project onto the EnSite Model. This means that these elements need to be within the projection distance in order to be projected onto the EnSite Model. Additionally, the statement also mentions that when Map Tags, Automarks & Mapping Points are within the projection distance of the EnSite-DIF Fused Model, they do not project onto the DIF Model if Project on DIF is not enabled. This implies that in order for these elements to be projected onto the DIF Model, Project on DIF needs to be enabled.Rate this question:
-
- 6.
Using the below table as reference, how many Automarks will be visible in the Map display when Visible Thresholds for Avg Force: 16 & Max Force: 35 is added. Automark / Transition Number Max Force Avg Force Automark 1 45 33 Transition 1 45 33 Automark 2 34 21 Transition 2 34 20 Automark 3 28 17 Transition 3 54 38 Automark 4 29 16 Transition 4 29 17 Automark 5 44 29
-
3
-
5
-
2
-
None of the above
Correct Answer
A. 2Explanation
The correct answer is 2 because there are two Automarks that have an Avg Force value less than or equal to 16 and a Max Force value less than or equal to 35. These two Automarks are Automark 3 and Automark 4.Rate this question:
-
- 7.
Identify the correct statement (s).
-
Labels (2D & 3D) can be placed on any of the visible, connected electrode with valid location.
-
Anatomic Markers can be placed when in Model - Edit Mode, if there are multiple surfaces and only one is selected at a time.
-
3D Lesions can be converted into a 2D Lesion which in turn can be projected only onto the EnSite Model
-
Tape Measures don’t display the measured value if they are placed onto non-field scaled model.
-
Shadows will be moved when EnGuides are moved using EnGuide Alignment.
Correct Answer(s)
A. Labels (2D & 3D) can be placed on any of the visible, connected electrode with valid location.
A. Tape Measures don’t display the measured value if they are placed onto non-field scaled model.Explanation
The first statement is correct because labels can be placed on any visible and connected electrode with a valid location. The second statement is incorrect because anatomic markers can be placed in Model - Edit Mode, even if there are multiple surfaces selected. The third statement is incorrect because 3D lesions cannot be converted into 2D lesions and projected onto the EnSite Model. The fourth statement is correct because tape measures will not display the measured value if they are placed onto a non-field scaled model. The fifth statement is incorrect because shadows will not be moved when EnGuides are moved using EnGuide Alignment.Rate this question:
-
- 8.
Identify one of the Map tag for which the user is not provided with an option to change the color ?
-
Anatomic Markers
-
Lesions
-
Tape Measures
-
None of the above
Correct Answer
A. None of the aboveExplanation
The correct answer is "None of the above." This means that there is no map tag for which the user is not provided with an option to change the color. This suggests that the user has the ability to change the color for all the map tags mentioned in the options, including Anatomic Markers, Lesions, and Tape Measures.Rate this question:
-
- 9.
Map Tags placed can be deleted anytime (Real-time, Real-time Review & Offline) during the study.
-
True
-
False
Correct Answer
A. TrueExplanation
Map Tags are a feature that allows users to mark specific locations on a map during their study. This answer states that these Map Tags can be deleted at any time, regardless of whether the user is studying in real-time, using real-time review, or studying offline. Therefore, the correct answer is True.Rate this question:
-
- 10.
How many Automarks will be collected when the physician moves the catheter from one location to another location in straight line with 7 stops in between of 4, 5, 2, 7, 1, 9, 3 seconds at each stop having equal distance between them of 5 mm respectively with below Placement Settings: Minimum Marker Time - 3 seconds, Marker Spacing - 2 mm and Away Time - 8 seconds.
-
5
-
6
-
0
-
7
Correct Answer
A. 5 -
- 11.
Identify the Color Metric value(s).
-
Total Force
-
Max Temperature
-
Imp Drop %
-
Axial Force
-
Energy
-
LSI
Correct Answer(s)
A. Max Temperature
A. Imp Drop %
A. Energy
A. LSIExplanation
The given answer includes the metrics "Max Temperature," "Imp Drop %," "Energy," and "LSI." These metrics are likely color-coded indicators that measure different aspects or variables. The color metric values for these metrics could represent different ranges or levels of measurement, such as temperature levels, percentage drop levels, energy levels, or LSI levels. The specific color values associated with each metric would provide further information about the corresponding measurements.Rate this question:
-
- 12.
Electrode Labels can be placed placed when: i. Atleast one catheter is defined. ii. EnSite Model fused to another EnSite of DIF Model iii. Active Electrode is not sheathed iv. Active electrode is green(no error condiion exists) or yellow( a cautionary condition exists)
-
I, ii, iv is TRUE
-
Ii, iii, is TRUE
-
All of the above is TRUE
-
None of the above is TRUE
Correct Answer
A. All of the above is TRUEExplanation
The correct answer is "All of the above is TRUE" because according to the given conditions, electrode labels can be placed when at least one catheter is defined, EnSite Model is fused to another EnSite or DIF Model, and the active electrode is either green (indicating no error condition) or yellow (indicating a cautionary condition). Therefore, all of the conditions i, ii, and iv are true.Rate this question:
-
- 13.
Identify the condition(s) during which a surface map tag cannot be placed.
-
When the user enter Model - Edit mode.
-
When the user enter Model Points Deletion mode.
-
After the user finishes the model.
-
When there is a finished model but few of the surfaces from the Surface tree are hidden.
Correct Answer(s)
A. When the user enter Model - Edit mode.
A. When the user enter Model Points Deletion mode.Explanation
When the user enters Model - Edit mode or Model Points Deletion mode, a surface map tag cannot be placed. This is because these modes are specifically designed for editing or deleting model points, and not for adding surface map tags. After the user finishes the model, they can place surface map tags. However, if there is a finished model but some surfaces from the Surface tree are hidden, surface map tags cannot be placed until all surfaces are visible.Rate this question:
-
- 14.
Map Tags can be placed on EnSite Model , DIF Model but not on Fused EnSite - DIF Model.
-
True
-
False
Correct Answer
A. FalseExplanation
Map Tags can be placed on EnSite Model, DIF Model, and Fused EnSite-DIF Model. The statement in the question is incorrect, as it suggests that Map Tags cannot be placed on Fused EnSite-DIF Model, which is not true.Rate this question:
-
- 15.
Identify the condition(s) in which the RF Session Statistics is computed for an RF Session.
-
When an RF Session is in progress.
-
When an RF Session does not contain Automarks and it contains only Transitions.
-
When the RF Session is less the 10 seconds.
-
When the RF Session contains both Automarks and Transitions.
Correct Answer(s)
A. When an RF Session does not contain Automarks and it contains only Transitions.
A. When the RF Session is less the 10 seconds.
A. When the RF Session contains both Automarks and Transitions.Explanation
The RF Session Statistics is computed for an RF Session when it does not contain Automarks and it contains only Transitions, when the RF Session is less than 10 seconds, and when the RF Session contains both Automarks and Transitions.Rate this question:
-
- 16.
Identify the correct statement(s) pertaining to Labels.
-
Surface, 2D & 3D Labels can be placed anytime during the study after validation.
-
3D Labels can be projected onto EnSite/DIF model if they are within the projection distance.
-
Surface, 2D & 3D Labels can be moved from one location to another using *Move Selected Labels* feature.
-
2D Labels can be converted into 3D Labels and vice versa.
-
2D/3D Labels can be placed on a sheath initialized catheter if the electrode in which we intend to place the Label is not sheathed.
Correct Answer(s)
A. Surface, 2D & 3D Labels can be placed anytime during the study after validation.
A. 2D/3D Labels can be placed on a sheath initialized catheter if the electrode in which we intend to place the Label is not sheathed. -
- 17.
How many labels can be placed in the study in which it already has a DIF model loaded with 1024 labels.
-
1024
-
2
-
1
-
0
Correct Answer
A. 0Explanation
Since the study already has a DIF model loaded with 1024 labels, it means that all the labels have already been placed. Therefore, no more labels can be placed, resulting in the answer being 0.Rate this question:
-
- 18.
Identify the condition(s) during which the map tags (Surface, 2D & 3D) placed by the users will be removed from the map display. i. User deletes the placed map tags. ii. When all model points of the model in which the Surface Map tag is placed is deleted. iii. When the study is validated again after resuming from offline mode. iv. When the maps created in the study is deleted.
-
I, ii & iii is True and iv is False.
-
Ii & iv is True and i & iii is False.
-
I, ii & iii is False and iv is True.
-
Ii & iv is False and i & iii is True.
Correct Answer
A. I, ii & iii is True and iv is False.Explanation
The map tags placed by users will be removed from the map display in the following conditions:
i. When the user deletes the placed map tags.
ii. When all model points of the model in which the Surface Map tag is placed are deleted.
iii. When the study is validated again after resuming from offline mode.
However, the map tags will not be removed when the maps created in the study are deleted.Rate this question:
-
- 19.
Anatomic Markers: i. Can be placed as an Open Marker ii. Can be placed as a Close Marker iii. Can be deleted anytime during the study iv. Placed locations can be modified after it is placed v. Cutout option removes the part of the model marked by the closed anatomic marker
-
I, iii & v is correct
-
Ii, iv is correct
-
I, ii, iii & iv is correct
-
All of the above is correct
Correct Answer
A. All of the above is correctExplanation
Anatomic markers can be placed as both open and close markers, can be deleted at any time during the study, and the cutout option removes the part of the model marked by the closed anatomic marker. Additionally, the placed locations of the markers can be modified after they are placed. Therefore, all of the given statements are correct.Rate this question:
-
- 20.
2D/ 3D Labels and Lesions can be placed on an electrode which is red in color due to an error condition.
-
True
-
False
Correct Answer
A. FalseExplanation
The statement suggests that the color of the electrode is red due to an error condition. However, there is no direct correlation between the color of the electrode and any error condition. Therefore, the answer is false.Rate this question:
-
Quiz Review Timeline (Updated): Aug 24, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Aug 24, 2023Quiz Edited by
ProProfs Editorial Team -
Nov 28, 2018Quiz Created by
Guru
Back to top