General Safety Quiz: Job And Shop Rules! Trivia
28 Questions
| Total Attempts: 525
Settings
Safety is the primary concern, whether it's home, office, factories, school, or hospitals. People should be aware of the general safety rules to prevent any injury or incident. How well do you know about safety rules? Take this quiz to test your basic knowledge about safety precaution and regulations to minimize mishappenings. The following questions are a scenario based type. Choose either True or False. Let's begin the safety quiz. Good Luck!
Questions and Answers
- 1.Be alert for dangers and hazards.
- A.
True
- B.
False
- 2.Conduct yourself in a safe manner; participate in horseply only on break periods.
- A.
True
- B.
False
- 3.Consider the safety of others
- A.
True
- B.
False
- 4.Do not distract workers operating a tool or machine.
- A.
True
- B.
False
- 5.Work with adequate light.
- A.
True
- B.
False
- 6.Be familiar with building exits, fire-fighting and first aid equipment.
- A.
True
- B.
False
- 7.Be aware of the voltage before plugging in a power tool.
- A.
True
- B.
False
- 8.Use the right tool or equipment for the job, and use it properly.
- A.
True
- B.
False
- 9.Keep all hand tools in an oil bath until needed.
- A.
True
- B.
False
- 10.Retain all tool warranties and purchase orders.
- A.
True
- B.
False
- 11.Operate a hazardous machine only after receiving instruction on how to operate the machine safely in all working conditions.
- A.
True
- B.
False
- 12.Make sure that all guards and barriers are in place and adjusted properly before using a machine tool.
- A.
True
- B.
False
- 13.Use correct, properly fitting drill bits for nuts, bolts, and objects to be turned or held.
- A.
True
- B.
False
- 14.Keep work areas clean and free of debris and other hazards.
- A.
True
- B.
False
- 15.Store tools, materials, and supplies safely in cabinets, on shelves or other suitable areas.
- A.
True
- B.
False
- 16.Keep sufficient brooms, brushes, and other housekeeping equipment readily available.
- A.
True
- B.
False
- 17.Clean chips from a machine with a rag or your bare hands, not with a brush.
- A.
True
- B.
False
- 18.Wear hand protection when using grinders and buffers.
- A.
True
- B.
False
- 19.Use a solvent only after determining its properties, the kind of work it has to do, and how to use it.
- A.
True
- B.
False
- 20.Use and store potentially hazardous materials and products strictly according to warranty instructions and cautions.
- A.
True
- B.
False
- 21.Clean up any spilled liquids immediately.
- A.
True
- B.
False
- 22.Store oily rags and oily waste in a self-closing or spring-lid plastic container.
- A.
True
- B.
False
- 23.Check all equipment before energizing or activating.
- A.
True
- B.
False
- 24.Disconnect the power from all energized tools, and tag and lockout machine tools, before performing any maintenance tasks such as oiling or cleaning.
- A.
True
- B.
False
- 25.Do not run over power cords with dollies or carts.
- A.
True
- B.
False
Back to top