Ers7n 2018 All

130 Questions | Attempts: 132
Please wait...
Question 1 / 131
🏆 Rank #-- ▾
Score 0/100

1. Which type of maintenance ensures that equipment is ready and available at the time of need?

Submit
Please wait...
About This Quiz
Maintenance Quizzes & Trivia

Lucky number 7

2.

What first name or nickname would you like us to use?

You may optionally provide this to label your report, leaderboard, or certificate.

2. Which of the following is used to highlight trends, benchmarks, of safety conditions relating to maintenance equipment, personnel, training, or processes?

Submit

3. Which AFTO IMT is used to maintain a permanent history of significant
maintenance actions on end-items of equipment?

Submit

4. What provides a measurement of unit performance and capability?

Submit

5. Which primary maintenance metric indictor shows problems first, as they directly impact maintenance's capability to provide resources to execute the mission?

Submit

6. Which maintenance repair priority is designated only for aircraft that are on alert status or aircraft that are supporting the war plan or national emergency missions?

Submit

7. When a maintenance squadron production superintendent is appointed, who must he or she inform of specialist non-availability to at the beginning of each shift?

Submit

8. What agency's basic mission is to launch and recover aircraft and to perform the necessary servicing, inspections, and maintenance to perform daily aircraft flying operations?

Submit

9. In relation to aerospace ground equipment, what are centrally located to enhance mission performance?

Submit

10. If a Refurbishment section is established, wings have the option to align it under either the Maintenance Flight or the

Submit

11. Training detachments (TDs) are administratively assigned to which MAJCOM?

Submit

12. The block training method is normally used to teach which MAINTENANCE Training Flight (MTF) training course?

Submit

13. Who is responsible for conducting an interview with both the trainee and his/her supervisor before a TRAINING starts a career development course (CDC)?

Submit

14. The maximum continuous duty time you can schedule your workers for without getting maintenance group commander (MXG/CC) approval is

Submit

15. The assets in a high priority mission support kit (HPMSK) should be transferred into the host base's Standard Base Supply System account after how many days?

Submit

16. Which eXpendability, recoverability, and reparability codes (ERRC) must be assigned to an asset Before it can be placed in bench stock?

Submit

17. Which of the following is not an obvious sign of pollution?

Submit

18. What form is used to document all report of surveys (ROS)?

Submit

19. Which urgency justification codes (UJCs) are used to show a supply request for bits and pieces to repair a line replaceable unit (LRU) or shop replaceable unit (SRU) spare?

Submit

20. When a mission capable (MICAP) part issues and is placed in the tail number bin (TNB), supply personnel notify the

Submit

21. Once a Category I deficiency is discovered, a deficiency report (DR) must be submitted to the Screening Point within

Submit

22. The Product Improvement Manager is usually assigned to what maintenance group (MXG) section?

Submit

23. Which of the following is not a technical order (TO) change priority category?

Submit

24. Red Ball maintenance is not designed to prevent

Submit

25. Who is the office of primary responsibility (OPR) for development of wing procedures for control and management of tools/equipment used on the flight line and in aerospace maintenance industrial areas?

Submit

26. The Wing foreign object damage (FOD) monitor is normally located within the

Submit

27. Which of the following, if inadvertently dropped during aircrew operations, is not considered a dropped object under the Dropped Object Prevention Program?

Submit

28. Which primary maintenance metric indictor shows and follows firmly established trends?

Submit

29. Who is responsible for standardizing maintenance discipline, procedures, organizational structures, compliance, and management philosophy?

Submit

30. Maintenance Supply Liaison personnel report directly to the commander of the

Submit

31. Which supply tracking document provides information on all document numbers processed during the day?

Submit

32. Who must authorize temporary storage of in-transit classified material in cargo security cages and alarmed rooms?

Submit

33. Which AF publication provides general guidance for executing an effective maintenance recovery operation?

Submit

34. Which of the following is used to assign responsibilities, direct actions, and prescribe procedures within a subordinate function (i.e., a staff office, a branch, a squadron, etc.)?

Submit

35. Printed copies of the AFTO IMT 95 are not required to accompany end items upon transfer

Submit

36. What AFTO IMT is used to document accumulated cycles, operating time, and maintenance history, as well as pertinent manufacturing data for jet engine turbine wheels?

Submit

37. Which Integrated Maintenance Database System-Central Database (IMDS-CDB) subsystem provides the capability to track engines and their components for time-changes and inspections and establishes and maintains the installed-on relationship between the engine and components?

Submit

38. Worker safety and health information must be monitored, tracked, and documented using what AF IMT?

Submit

39. Section non-commissioned officers-in-charge must ensure their sections are organized with tools, equipment, and material as close to the Point of Maintenance without jeopardizing

Submit

40. Which Maintenance Operation Squadron section maintains standardized aircraft jacket files and attends pre-dock and post-dock inspection meetings?

Submit

41. Which technicians maintain aircraft bleed air, vacuum, pneumatic, fire suppression, and oxygen systems, including removing and replacing associated system components?

Submit

42. Which Fabrication Flight section's processes are tightly controlled because the parts and tools they manufacture must meet the stringent standards of aerospace-grade equipment?

Submit

43. Which Munitions Flight section receives, stores, warehouses, handles, inspects, ships, inventories, and transports containers, dispensers, and training items?

Submit

44. What training phase has these four sub-phases: multiphase, MAJCOM mandatory, freeflow, and maintenance qualification training?

Submit

45. An individual comes due for a training recertification while TDY, on leave, or incapacitated. Provided it has not been more than 60 days since the original due date, how many days are allowed after returning before decertification is required?

Submit

46. Maintenance group commanders are the final approval authority for exceeding a 12-hour shift up to

Submit

47. Which of the following is not normally a Maintenance Supply Liaison duty?

Submit

48. Provided it is still serviceable, which type of shelf life item are you allowed to inspect and re-mark with a new expiration date?

Submit

49. When the aircraft owner or user does not stay with an aircraft which has secret or confidential equipment installed, she/he must arrange for security checks to be accomplished every

Submit

50. If a serially controlled item is cannibalized (CANN), the CANN authority is required to notify

Submit

51. Who designates the Impoundment Official for a particular impoundment situation?

Submit

52. How many digits make up an equipment identification designator (EID) code used to identify tools and equipment?

Submit

53. Who is the Quality Assurance (QA) Chief Inspector directly responsible to for ensuring the required Maintenance Standardization and Evaluation Program (MSEP) functions are performed?

Submit

54. When a unit has received an unsatisfactory Maintenance Standardization and Evaluation Team (MSET) rating, the maintenance group commander (MXG/CC) directs Quality Assurance (QA) to perform a follow-up inspection on the unit within how many days?

Submit

55. What Maintenance Standardization and Evaluation Team (MSET) individual assessment is an over-the-shoulder evaluation while the technician performs a task?

Submit

56. What Maintenance Standardization and Evaluation Team (MSET) individual assessment is performed after a technician completes a task?

Submit

57. What are the two most common types of primary maintenance metric indicators?

Submit

58. Who is responsible to the Weapons section chief for monitoring all armament systems maintenance and loading operations?

Submit

59. Training Business Area (TBA) provides Air Force personnel with global, real-time

Submit

60. What agency acts as a central repository of engineering drawings and other engineering data?

Submit

61. Who has the overall responsibility for AF policy governing the TO system?

Submit

62. Which of the following does not institute a restricted maintenance area?

Submit

63. Who is held legally responsible for their unit's Environmental Protection Agency program compliance in accordance with AFI 32-7042, Waste Management?

Submit

64. Which Maintenance Operations Squadron flight is a centrally located agency responsible for monitoring and developing long-range strategies to sustain fleet health?

Submit

65. Which agency is normally responsible for monitoring the overall MAINTENANCE SUPPLY interface and resolving supply support problems?

Submit

66. Who is responsible for determining the appropriate supply delivery priority for a parts request?

Submit

67. Which is not normally a Maintenance Group (MXG) technical order distribution office (TODO) duty?

Submit

68. Which Maintenance Group agency provides technical assistance for Deficiency Reports to work center supervisors? 

Submit

69. When Operating Instructions (OI) apply to multiple groups, they should be
published as

Submit

70. In addition to being familiar with the unit's assigned weapon system(s), squadron representatives for the Data Integrity Team must be at least

Submit

71. The goal for bench stock assets is to establish levels to provide how many days of supply?

Submit

72. What specific block of supply training must an individual receive before assuming duties as a due-in from maintenance (DIFM) monitor?

Submit

73. Which Logistics Readiness Squadron (LRS) office accounts for special purpose recoverable authorized maintenance (SPRAM) assets managed on in-use detail records?

Submit

74. In regards to the modification management program, which agency serves as the operator's interface with the single point manager for a weapons system?

Submit

75. Which maintenance capability category is performed at backshop level and consists of off-equipment maintenance?

Submit

76. In order to be given authority to downgrade a "Red-X" an individual must be approved by the maintenance group commander (MGX/CC) and hold the minimum grade of

Submit

77. A meeting to discuss manning issues in the maintenance group (MXG) is normally held

Submit

78. Who is responsible for developing a hazard communication (HAZCOM) training plan to notify personnel of all known hazards they may be exposed to in a particular workcenter?

Submit

79. Who is the office of primary responsibility (OPR) for the Intermediate Repair Enhancement Program?

Submit

80. What program promotes identifying and correcting system deficiencies before they affect combat capability?

Submit

81. Which Integrated Maintenance Database System-Central Database (IMDS-CDB) subsystem replaces the Maintenance Data Collection (MDC) system and provides maintenance personnel with the online capability to document, inquire, and produce retrievals of maintenance actions?

Submit

82. Which commander is tasked with developing and publishing the wing flying/maintenance schedule in coordination with other squadron maintenance operations officers/maintenance superintendents?

Submit

83. Manpower authorizations are

Submit

84. How often must the Maintenance Operations Officer/Maintenance Superintendent review and sign the special certification roster (SCR)?

Submit

85. Which tag should you use to document that a part has been properly drained and/or purged?

Submit

86. Which supply tracking document provides a management product for monitoring issue and bench stock supply support?

Submit

87. Who is the final authority for reviewing a unit's list of supply assets requiring functional check, calibration, or operational flight programming?

Submit

88. Who guides the overall Data Integrity Team process and ensures the data provided to maintenance managers and supervision is meaningful and factual?

Submit

89. How many standard squadrons are in a maintenance group?

Submit

90. What does the Debrief section use to help identify fault codes to aid maintainers in aircraft troubleshooting?

Submit

91. Which section is tasked with the maintenance, control, and storage of alternate mission equipment, dash-21 equipment, and maintenance, safety, and protective
equipment?

Submit

92. Who must appoint an individual to be an equipment account custodian?

Submit

93. Who designates cannibalization authorities?

Submit

94. What do you call wing-level maintenance facilities providing intermediate-level maintenance repair support for multiple Air Force units within a particular theater of operations?

Submit

95. Who is responsible for chairing the daily maintenance production/scheduling meeting with representatives from throughout the maintenance group (MXG)?

Submit

96. In the Training Business Area (TBA), what type of notification does the "System Messages" board provide in addition to software releases, projected downtimes, and training update information?

Submit

97. Which Precious Metals Indicator Code (PMIC) indicates that an item of supply contains a combination of two or more precious metals?

Submit

98. A dropped object that has resulted in casualties or property damage must be reported IAW    

Submit

99. Which of the following is not a section within a standard aircraft maintenance unit?

Submit

100. How often does the maintenance training flight (MTF) provide a status of training (SOT) briefing to the maintenance group commander (MXG/CC)?

Submit

101. Section non-commissioned officers-in-charge are responsible for developing cross-utilization training requirements, ensuring they do not interfere with

Submit

102. The Maintenance Operations Center is responsible for the overall management of which Integrated Maintenance Data System-Central Database (IMDS-CDB) subsystem?

Submit

103. Who is personally responsible for managing the Foreign Object Damage and Dropped Object Prevention programs?

Submit

104. The Aircraft section is split into two separate sections when an Aircraft Maintenance Unit's number of mission assigned aircraft is more than

Submit

105. Which Avionics Flight section is responsible for maintaining low-altitude navigation and targeting infrared for night (LANTIRN) pods?

Submit

106. Which Propulsion Flight section stores, builds up, tears down, modifies, and repairs engines, quick engine change kits, and test components?

Submit

107. Once established, how often must supply point accounts be reconciled by the workcenter supply point monitor?

Submit

108. The wing foreign object damage (FOD) monitor must notify the MAJCOM FOD manager within how many hours of a FOD incident?

Submit

109. All requests for depot level assistance must be coordinated through

Submit

110. Which of the following is not a standard flight in the maintenance squadron?

Submit

111. The Test, Measurement, and Diagnostic Equipment(TMDE) Flight maintains, calibrates, and certifies TMDE through the

Submit

112. What Maintenance Operations Flight section is responsible for periodically reviewing maintenance information system (MIS) products to ensure proper documentation and management of time compliance technical orders (TCTOs) by owning and managing agencies?

Submit

113. What continuation training consists of academic and practical hands-on courses that complement initial skills training received through AETC 
mission ready airman (MRA) and training detachment (TD) courses?

Submit

114. Which category of Deficiency Report should you submit if the equipment has a deficiency that if uncorrected, may cause major loss of damage to equipment and no workaround is known?

Submit

115. Which Integrated Maintenance Database System-Central Database (IMDS-CDB) subsystem allows users to track maintenance actions and has both maintenance and supply data?

Submit

116. Which section is the wing focal point for engine health tracking and the engine health management program?

Submit

117. The Maintenance Training Flight normally consists of what two sections?

Submit

118. Who acts as the Deficiency Report focal point between the support point and submitting organization?

Submit

119. Which section is normally responsible for aircraft troubleshooting, on-equipment repairs, component removal and installation, reprogramming avionics systems, and classified aircraft items management?

Submit

120. Which supply tracking document is produced daily and lists all back-ordered parts with an urgency of need (UND) code of A?

Submit

121. Who is responsible for establishing a crashed, damaged, or disabled aircraft recovery program?

Submit

122. Who must ensure the applicable aircraft form sets are provided to the Debrief section by the end of the flying day if debriefs are suspended due to aircraft flying surge operations?

Submit

123. Commanders have the option of establishing two separate squadrons, the Equipment Maintenance Squadron and the Component Maintenance Squadron, if maintenance squadron manning authorizations exceed

Submit

124. Which Avionics Flight section is responsible for performing off-equipment maintenance on systems such as all-weather landing, attitude reference and bombing, and inertial navigation?

Submit

125. Before a supply point can be established and located in a maintenance work area, who must Maintenance coordinate with?

Submit

126. Who has the responsibility for overall Deficiency Report program management for the submitting organization or group?

Submit

127. Who oversees the management of maintenance facilities and aircraft support equipment procurement and maintenance?

Submit

128. Who in the maintenance group (MXG) is responsible for ensuring the capability exists to meet local manufacture requirements?

Submit

129. When the goal is to get a refund or a new item in exchange, what type of deficiency report is submitted?

Submit

130. Unless delegated, who is responsible for reviewing all requests for special purpose recoverable authorized maintenance (SPRAM) authorizations submitted by SPRAM custodians?

Submit
×
Saved
Thank you for your feedback!
View My Results
Cancel
  • All
    All (130)
  • Unanswered
    Unanswered ()
  • Answered
    Answered ()
Which type of maintenance ensures that equipment is ready and...
Which of the following is used to highlight trends, benchmarks, of...
Which AFTO IMT is used to maintain a permanent history of significant ...
What provides a measurement of unit performance and capability?
Which primary maintenance metric indictor shows problems first, as...
Which maintenance repair priority is designated only for aircraft that...
When a maintenance squadron production superintendent is appointed,...
What agency's basic mission is to launch and recover aircraft and...
In relation to aerospace ground equipment, what are centrally located...
If a Refurbishment section is established, wings have the option to...
Training detachments (TDs) are administratively assigned to which...
The block training method is normally used to teach which MAINTENANCE...
Who is responsible for conducting an interview with both the trainee...
The maximum continuous duty time you can schedule your workers for...
The assets in a high priority mission support kit (HPMSK) should be...
Which eXpendability, recoverability, and reparability codes (ERRC)...
Which of the following is not an obvious sign of pollution?
What form is used to document all report of surveys (ROS)?
Which urgency justification codes (UJCs) are used to show a supply...
When a mission capable (MICAP) part issues and is placed in the tail...
Once a Category I deficiency is discovered, a deficiency report (DR)...
The Product Improvement Manager is usually assigned to what...
Which of the following is not a technical order (TO) change priority...
Red Ball maintenance is not designed to prevent
Who is the office of primary responsibility (OPR) for development of...
The Wing foreign object damage (FOD) monitor is normally located...
Which of the following, if inadvertently dropped during aircrew...
Which primary maintenance metric indictor shows and follows firmly...
Who is responsible for standardizing maintenance discipline,...
Maintenance Supply Liaison personnel report directly to the commander...
Which supply tracking document provides information on all document...
Who must authorize temporary storage of in-transit classified material...
Which AF publication provides general guidance for executing an...
Which of the following is used to assign responsibilities, direct...
Printed copies of the AFTO IMT 95 are not required to accompany end...
What AFTO IMT is used to document accumulated cycles, operating time,...
Which Integrated Maintenance Database System-Central Database...
Worker safety and health information must be monitored, tracked, and...
Section non-commissioned officers-in-charge must ensure their sections...
Which Maintenance Operation Squadron section maintains standardized...
Which technicians maintain aircraft bleed air, vacuum, pneumatic, fire...
Which Fabrication Flight section's processes are tightly...
Which Munitions Flight section receives, stores, warehouses, handles,...
What training phase has these four sub-phases: multiphase, MAJCOM...
An individual comes due for a training recertification while TDY, on...
Maintenance group commanders are the final approval authority for...
Which of the following is not normally a Maintenance Supply Liaison...
Provided it is still serviceable, which type of shelf life item are...
When the aircraft owner or user does not stay with an aircraft which...
If a serially controlled item is cannibalized (CANN), the CANN...
Who designates the Impoundment Official for a particular impoundment...
How many digits make up an equipment identification designator (EID)...
Who is the Quality Assurance (QA) Chief Inspector directly responsible...
When a unit has received an unsatisfactory Maintenance Standardization...
What Maintenance Standardization and Evaluation Team (MSET) individual...
What Maintenance Standardization and Evaluation Team (MSET) individual...
What are the two most common types of primary maintenance metric...
Who is responsible to the Weapons section chief for monitoring all...
Training Business Area (TBA) provides Air Force personnel with global,...
What agency acts as a central repository of engineering drawings and...
Who has the overall responsibility for AF policy governing the TO...
Which of the following does not institute a restricted maintenance...
Who is held legally responsible for their unit's Environmental...
Which Maintenance Operations Squadron flight is a centrally located...
Which agency is normally responsible for monitoring the overall...
Who is responsible for determining the appropriate supply delivery...
Which is not normally a Maintenance Group (MXG) technical order...
Which Maintenance Group agency provides technical assistance for...
When Operating Instructions (OI) apply to multiple groups, they should...
In addition to being familiar with the unit's assigned weapon...
The goal for bench stock assets is to establish levels to provide how...
What specific block of supply training must an individual receive...
Which Logistics Readiness Squadron (LRS) office accounts for special...
In regards to the modification management program, which agency serves...
Which maintenance capability category is performed at backshop level...
In order to be given authority to downgrade a "Red-X" an...
A meeting to discuss manning issues in the maintenance group (MXG) is...
Who is responsible for developing a hazard communication (HAZCOM)...
Who is the office of primary responsibility (OPR) for the Intermediate...
What program promotes identifying and correcting system...
Which Integrated Maintenance Database System-Central Database...
Which commander is tasked with developing and publishing the...
Manpower authorizations are
How often must the Maintenance Operations Officer/Maintenance...
Which tag should you use to document that a part has been properly...
Which supply tracking document provides a management product for...
Who is the final authority for reviewing a unit's list of supply...
Who guides the overall Data Integrity Team process and ensures the...
How many standard squadrons are in a maintenance group?
What does the Debrief section use to help identify fault codes to aid...
Which section is tasked with the maintenance, control, and storage of...
Who must appoint an individual to be an equipment account custodian?
Who designates cannibalization authorities?
What do you call wing-level maintenance facilities providing...
Who is responsible for chairing the daily maintenance...
In the Training Business Area (TBA), what type of notification does...
Which Precious Metals Indicator Code (PMIC) indicates that an item of...
A dropped object that has resulted in casualties or property damage...
Which of the following is not a section within a standard aircraft...
How often does the maintenance training flight (MTF) provide a status...
Section non-commissioned officers-in-charge are responsible for...
The Maintenance Operations Center is responsible for the overall...
Who is personally responsible for managing the Foreign Object Damage...
The Aircraft section is split into two separate sections when an...
Which Avionics Flight section is responsible for maintaining...
Which Propulsion Flight section stores, builds up, tears down,...
Once established, how often must supply point accounts be reconciled...
The wing foreign object damage (FOD) monitor must notify the MAJCOM...
All requests for depot level assistance must be coordinated through
Which of the following is not a standard flight in the maintenance...
The Test, Measurement, and Diagnostic Equipment(TMDE) Flight...
What Maintenance Operations Flight section is responsible for...
What continuation training consists of academic and practical hands-on...
Which category of Deficiency Report should you submit if the equipment...
Which Integrated Maintenance Database System-Central Database...
Which section is the wing focal point for engine health tracking and...
The Maintenance Training Flight normally consists of what two...
Who acts as the Deficiency Report focal point between the support...
Which section is normally responsible for aircraft troubleshooting,...
Which supply tracking document is produced daily and lists all...
Who is responsible for establishing a crashed, damaged, or disabled...
Who must ensure the applicable aircraft form sets are provided to the...
Commanders have the option of establishing two separate squadrons,...
Which Avionics Flight section is responsible for performing...
Before a supply point can be established and located in a maintenance...
Who has the responsibility for overall Deficiency Report program...
Who oversees the management of maintenance facilities and aircraft...
Who in the maintenance group (MXG) is responsible for ensuring the...
When the goal is to get a refund or a new item in exchange, what type...
Unless delegated, who is responsible for reviewing all requests for...
play-Mute sad happy unanswered_answer up-hover down-hover success oval cancel Check box square blue
Alert!