Ag Welding/Mechanics General Safety Test

38 Questions | Total Attempts: 5105

SettingsSettingsSettings
Please wait...
Welding Safety Quizzes & Trivia

This is a test I use to ensure all students have the safety know how to enter the shop.


Questions and Answers
  • 1. 
    Fire extinguisher Type A is used for
    • A. 

      Gas, oil

    • B. 

      Electrical, wiring

    • C. 

      Wood, paper

    • D. 

      Combustible Metals

    • E. 

      None of the above

  • 2. 
    The student should notify the instructor immediately in case of
    • A. 

      Accident

    • B. 

      Injury

    • C. 

      Defective equipment or tools

    • D. 

      All of the above

  • 3. 
    While performing work in the mechanics lab, one should not
    • A. 

      Get the tools to work with on your own

    • B. 

      Return tools and supplies to their storage areas

    • C. 

      Stay at your designated work station

    • D. 

      Disturb other workers

  • 4. 
    Always keep____________ when moving or storing cylinders.
    • A. 

      rolling

    • B. 

      clean

    • C. 

      Valve caps

    • D. 

      Dry

  • 5. 
    The acetylene regulator nut should be turned ____________ to tighten.
    • A. 

      Clockwise

    • B. 

      Counter clockwise

  • 6. 
    Any small piece of metal should be ___________ while drilling.
    • A. 

      Clean

    • B. 

      Oiled

    • C. 

      Clamped

    • D. 

      Held

  • 7. 
    Oily rags should be placed in a
    • A. 

      Trash can

    • B. 

      Closed metal container

    • C. 

      open metal container

  • 8. 
    Running, pushing, fighting, practical jokes, and other misbehavior can result in
    • A. 

      Someone getting hurt

    • B. 

      Disciplinary action from your grade level administrator

    • C. 

      Loss of shop privileges (and additional bookwork) for the term

    • D. 

      Removal from class for the remainder of the term

    • E. 

      All of the above

  • 9. 
    Improper use of tools is not safe, an example of improper tool use is
    • A. 

      Squashing a pencil or pen in a vise

    • B. 

      Pounding on a screwdriver with a hammer

    • C. 

      Using a machine with hood strings hanging untied

    • D. 

      All of the above

  • 10. 
    If there is an emergency in the lab and the instructor cannot respond:
    • A. 

      One person should call the office by dialing 110

    • B. 

      Two people should go to the office and tell the principal or secretary

    • C. 

      Someone who knows first aid should render aid

    • D. 

      All of the above

  • 11. 
    When lifting a vehicle you should
    • A. 

      Raise it an inch and give it a shake

    • B. 

      Put jack stands under it

    • C. 

      Use recomended lifting points

    • D. 

      Never get under a jacked up car that isn't properly supported on safety stands. Once a car is placed on stands it should be checked for stability

    • E. 

      All of the above

  • 12. 
    Eye protection (goggles, safety glasses and or face masks) are worn
    • A. 

      When you are in the shop area

    • B. 

      When the demonstration area of the classroom is in use

    • C. 

      When you are out working in the parking area

    • D. 

      All of the above

    • E. 

      Eye protection is optional

  • 13. 
    Eye protection is
    • A. 

      Sunglasses

    • B. 

      Corrective lens glasses

    • C. 

      Safety glasses

    • D. 

      All of the above

  • 14. 
    What category of fire extinguisher would you use on a gasoline fire
    • A. 

      A

    • B. 

      B

    • C. 

      C

    • D. 

      D

    • E. 

      All of the above

  • 15. 
    Which is a hazard associated with a running vehicle?
    • A. 

      A moving fan

    • B. 

      Hot exhaust system

    • C. 

      High voltage shock

    • D. 

      All of the above

    • E. 

      None of the above

  • 16. 
    The                 should always be used in operating machinery
    • A. 

      Proper technique

    • B. 

      Safety gloves

    • C. 

      Grounded outlet

    • D. 

      None of the above

  • 17. 
    If a machine or power tool malfunctions you should
    • A. 

      Use a different one

    • B. 

      Turn it off and tell the instructor immediately

    • C. 

      Keep using it unless it stops

    • D. 

      Throw it away

    • E. 

      None of the above

  • 18. 
    What category of fire extinguisher would do more harm than good on a gasoline fire?
    • A. 

      A

    • B. 

      B

    • C. 

      C

    • D. 

      Any of the above

  • 19. 
    If the lights go out
    • A. 

      Keep working

    • B. 

      Crawl under a table

    • C. 

      Wait for your machine to stop before moving

    • D. 

      None of the above

  • 20. 
    If you get something in your eye
    • A. 

      Rub it

    • B. 

      Have a friend wipe it with a paper towel

    • C. 

      Use the eye wash to rinse your eyes

    • D. 

      None of the above

  • 21. 
    Always check with                 before using tools or equipment
    • A. 

      Instructor

    • B. 

      Friends

    • C. 

      Counselor

  • 22. 
    Check chemical           twice to make sure you have the correct substance and the correct proportions
    • A. 

      Labels

    • B. 

      Color

    • C. 

      Smell

  • 23. 
    PPE stands for
    • A. 

      Proper protection equipment

    • B. 

      Protect public environment

    • C. 

      Personal Protection equipment

  • 24. 
    MSDS stands for?
    • A. 

      Medical safety data services

    • B. 

      Material service data sheets

    • C. 

      Material safety data sheets

  • 25. 
    The hood or upper gap adjustment should be kept        inch from the wheel and should be adjusted for wear to protect the operator from flying fragments, or a busting wheel
    • A. 

      1\8

    • B. 

      1\4

    • C. 

      1\2

Back to Top Back to top