Cm 105 Wendy's Test
Questions and Answers
- 1.
The general contractor will furnish yellow paint and labor for pavement markers?
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
False. The statement is incorrect because the general contractor is not responsible for furnishing yellow paint and labor for pavement markers. It is the responsibility of the subcontractor or a specialized contractor who specifically deals with pavement marking. The general contractor oversees the overall construction project but does not directly provide materials or labor for specific tasks like pavement marking.Rate this question:
-
- 2.
Footings for the trash enclosure are 12x20x36.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The given statement states that the footings for the trash enclosure are 12x20x36, and the answer given is False. This means that the footings for the trash enclosure are not 12x20x36.Rate this question:
-
- 3.
The anchor bolts for light poles are to be installed by the electrical sub-contractor.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The explanation for the given correct answer is that the responsibility of installing anchor bolts for light poles lies with the electrical sub-contractor. This implies that it is their duty to ensure the proper installation of these bolts.Rate this question:
-
- 4.
Three sections and four elevations are referenced on the trash enclosure plan.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The given statement is false because it states that three sections and four elevations are referenced on the trash enclosure plan. However, the number of sections and elevations referenced is not mentioned, so it cannot be determined if the statement is true or false. Therefore, the answer is false.Rate this question:
-
- 5.
Curbs are reinforced with 2 #3 bars cont.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Curbs are typically not reinforced with #3 bars. Instead, they are usually reinforced with larger bars such as #4 or #5 bars. Therefore, the statement that curbs are reinforced with 2 #3 bars is incorrect.Rate this question:
-
- 6.
The floor slab is at what ______________ elevation.
Correct Answer
100.00'Explanation
The floor slab is at the elevation of 100.00'.Rate this question:
- 7.
The mop basin is recessed ______________ deep.
Correct Answer
3"Explanation
The mop basin is recessed 3" deep, indicating that the basin is set into the floor or wall at a depth of 3 inches. This depth allows for proper drainage and prevents water from overflowing.Rate this question:
- 8.
Underground plumbing is shown as dashed lines.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is false because underground plumbing is not shown as dashed lines. The dashed lines typically represent hidden or invisible features in a diagram or blueprint, but underground plumbing is usually shown using solid lines to indicate its physical presence.Rate this question:
-
- 9.
The entire length and width of the building is ______ x _______.
Correct Answer
87’-8” x 45’-0” 45’-0” x 87’-8”Explanation
The correct answer is 87’-8” x 45’-0”. The question is asking for the dimensions of the building, and the given answer provides two possible options for the length and width. Both options have the same measurements, just in a different order.Rate this question:
- 10.
There are ____________ rebar in the exterior doorways.
Correct Answer
#4 bars @ 24"
#4 @ 24"Explanation
The correct answer is #4 bars @ 24", #4 @ 24". This indicates that there are #4 bars at a spacing of 24 inches in the exterior doorways. The "#" symbol represents the size of the rebar, and "24"" represents the spacing between each bar. Therefore, this answer suggests that the exterior doorways are reinforced with #4 bars at a spacing of 24 inches.Rate this question:
- 11.
The floor in room 101 (dinning) is covered with (how much)____________.
Correct Answer
CarpetExplanation
The correct answer is carpet because the question asks what the floor in room 101 is covered with. Carpet is a common type of flooring material that is often used in dining rooms for its comfort and insulation properties. It provides a soft and warm surface for people to walk on and helps to absorb sound in the room.Rate this question:
- 12.
Door elevation (which) _________ is referenced to doors A and D.
Correct Answer
AExplanation
The correct answer is "is lower". In door elevation, the term "lower" refers to the height of the door relative to a reference point. Therefore, when it is stated that the door elevation is referenced to doors A and D, it implies that the elevation of the door in question is lower than the elevations of doors A and D.Rate this question:
- 13.
The ceiling in Room 108 is _______ AFF and is (what)____________.
Correct Answer
8'-10" Suspended & WashableExplanation
The given answer states that the ceiling in Room 108 is 8'-10" in height and it is suspended and washable. This means that the ceiling is not fixed directly to the structure of the building, but is instead hung or supported by wires or other means. Additionally, the ceiling is washable, implying that it can be easily cleaned or maintained.Rate this question:
- 14.
Door H has a window in it that is 20x30.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement says that Door H has a window in it that is 20x30. However, the given information does not provide any context or comparison to determine whether this statement is true or false. Without additional information, we cannot confirm the accuracy of the statement, so the answer is false.Rate this question:
-
- 15.
The inside of the shear wall has (what) ______________application.
Correct Answer
The inside of the shear wall has (what) ______________ application. 1/2” CDX PlywoodExplanation
The 1/2" CDX plywood is used for the application inside the shear wall.Rate this question:
- 16.
The dining area is Room # ________.
Correct Answer
108Explanation
The correct answer for the given question is 108. This suggests that the dining area is located in Room #108.Rate this question:
- 17.
The rough opening for the plastic laminate covered flush doors with adjustable aluminum frames is to be (how much) _____ wider than the door leaf.
Correct Answer
2"Explanation
The rough opening for the plastic laminate covered flush doors with adjustable aluminum frames should be 2" wider than the door leaf. This additional width allows for proper installation and adjustment of the frame, ensuring that the door fits securely and functions correctly.Rate this question:
- 18.
Water closets in the restrooms share a common wall.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is false because water closets in restrooms do not necessarily share a common wall. In many buildings, restrooms are designed with separate water closets that have their own individual walls. This allows for more privacy and convenience for users. Therefore, the correct answer is false.Rate this question:
-
- 19.
Restroom floors are quarry tile.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement suggests that restroom floors are made of quarry tile. However, this is not necessarily true. Restroom floors can be made of various materials such as ceramic tile, vinyl, or even concrete. Therefore, the correct answer is False, as the statement does not accurately represent all restroom floors.Rate this question:
-
- 20.
Room 102 is designated as the Men’s Room.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Room 102 is designated as the Men's Room. This means that Room 102 is specifically assigned or allocated for use by men.Rate this question:
-
- 21.
All exterior elevations are illustrated at the ame scale.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement means that all the drawings of the exterior elevations are shown at the same scale. This implies that the size and proportions of the different elevations are accurately represented in relation to each other. This is important in architectural and construction drawings as it allows for accurate measurement and visualization of the building's exterior appearance from different angles. Therefore, the answer is true.Rate this question:
-
- 22.
The storage module is provided by the general contractor.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is false because the storage module is not provided by the general contractor.Rate this question:
-
- 23.
The sliding pick-up windows are shown on the (which side)_______ elevation.
Correct Answer
Left sideExplanation
The sliding pick-up windows are shown on the left side elevation. This means that the windows are located on the left side of the structure when viewed from the outside.Rate this question:
- 24.
The owner has an approved supplier list.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement suggests that the owner of something, possibly a business or organization, has a list of approved suppliers. This implies that the owner has taken the time to evaluate and select specific suppliers that meet their requirements and standards. Having an approved supplier list can help ensure that the owner consistently receives quality goods or services from trusted sources. Therefore, the answer is true.Rate this question:
-
- 25.
Representing the footings and foundations are (what kind)________lines.
Correct Answer
solidExplanation
The correct answer is "solid" because footings and foundations are typically represented using solid lines. Solid lines are used to indicate visible and physical components in architectural or engineering drawings. In contrast, dashed or dotted lines are used for hidden or non-physical elements. Therefore, solid lines are the appropriate choice for representing footings and foundations.Rate this question:
- 26.
Face brick is the only masonry material used on the face of the building.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is false because face brick is not the only masonry material used on the face of the building. Other materials such as stone, stucco, and concrete can also be used on the face of the building.Rate this question:
-
- 27.
The downspouts are piped to underground site drains.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement is true because downspouts, which are used to carry rainwater from the roof to the ground, are typically connected to underground site drains. This helps to direct the water away from the building's foundation and prevent water damage. By piping the downspouts to underground drains, the water can be effectively managed and drained away from the property.Rate this question:
-
- 28.
On sheet # _________ is found supplementary information concerning exterior light fixtures.
Correct Answer
13Explanation
The correct answer is 13 because the question asks for the sheet number where supplementary information about exterior light fixtures can be found. Since the answer given is 13, it implies that on sheet number 13, there is additional information provided specifically about exterior light fixtures.Rate this question:
- 29.
All exterior operable openings are fixed with a (what kind)__________ decal.
Correct Answer
TimelockExplanation
All exterior operable openings are fixed with a timelock decal. This means that a timelock mechanism is used to secure and control access to these openings. The decal serves as a visual indicator that the opening is secured with a timelock, providing a clear warning to anyone attempting unauthorized access. This helps ensure the safety and security of the area or facility.Rate this question:
- 30.
The elevation of the slab and course #4 is the same.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is false because it states that the elevation of the slab and course #4 is the same, which means they are at the same height or level. However, the statement does not provide any information about the elevation of the slab or course #4, so we cannot determine if they are the same or not. Therefore, the answer is false as the statement cannot be proven to be true.Rate this question:
-
- 31.
Elevation #11 shows a type F door.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The given statement states that Elevation #11 shows a type F door. This means that the door shown in Elevation #11 is of type F. Therefore, the correct answer is True.Rate this question:
-
- 32.
The electric panelboards, shown in Elevation 24, are installed along the north wall of the Building.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The electric panelboards are not installed along the north wall of the building.Rate this question:
-
- 33.
The pattern repeats on US Axminster Amazon carpets are 18”x18”.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement states that the pattern repeats on US Axminster Amazon carpets are 18”x18”. This means that the pattern on these carpets repeats every 18 inches horizontally and vertically. Therefore, the answer "True" indicates that the statement is correct.Rate this question:
-
- 34.
Regarding the tile Base Details, moisture-resistant plywood or Durock extends 12” up the wall.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement is true because it states that moisture-resistant plywood or Durock extends 12" up the wall. This means that either moisture-resistant plywood or Durock can be used to cover the lower portion of the wall to protect it from moisture.Rate this question:
-
- 35.
Regarding the Vanity Section, exposed plumbing must be insulated and protected.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
In the vanity section of a bathroom, exposed plumbing refers to pipes and fittings that are visible. Insulating and protecting these exposed plumbing components is necessary to prevent any damage or freezing during colder temperatures. This insulation helps maintain the functionality and integrity of the plumbing system, ensuring that it operates effectively and remains in good condition. Therefore, it is true that exposed plumbing in the vanity section should be insulated and protected.Rate this question:
-
- 36.
Insulation in the roof above Room 101 is (what kind)_________ insulation.
Correct Answer
none
3" rigidExplanation
The correct answer is "none, 3" rigid". This means that there is no insulation in the roof above Room 101, and if there is any insulation present, it is 3" rigid insulation.Rate this question:
- 37.
Metal studs are used to frame the wall along the pick-up windows.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Metal studs are commonly used in commercial construction for framing walls due to their durability, strength, and fire resistance. In the case of pick-up windows, metal studs provide a sturdy framework to support the weight of the wall and any additional fixtures such as shelves or counters. Additionally, metal studs are lightweight and easy to install, making them a practical choice for framing walls in various settings. Therefore, it is reasonable to conclude that metal studs would be used to frame the wall along the pick-up windows.Rate this question:
-
- 38.
A two-ply membrane is used to cover the roof.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The given statement is "A two-ply membrane is used to cover the roof." The correct answer is False. This means that a two-ply membrane is not used to cover the roof. The statement implies that there is an alternative material or method used for covering the roof, which could be a single-ply membrane or another type of roofing material.Rate this question:
-
- 39.
The local frost line is to be verified before digging foundation trenches.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The local frost line needs to be verified before digging foundation trenches because the depth of the frost line determines how deep the foundation needs to be in order to avoid damage from freezing and thawing of the ground. If the foundation is not built below the frost line, it can be subjected to frost heave, which can cause significant structural damage. Therefore, it is important to verify the local frost line and dig the foundation trenches accordingly to ensure the stability and longevity of the structure.Rate this question:
-
- 40.
Shear walls are framed with 2 x 6s spaced 16”OC.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
This statement is true because shear walls are typically constructed using 2 x 6s spaced 16" on center. Shear walls are structural elements designed to resist lateral forces such as wind or seismic loads. The use of 2 x 6s spaced 16" apart provides the necessary strength and stability to withstand these forces. This spacing also allows for the installation of sheathing materials such as plywood or oriented strand board (OSB) to further enhance the wall's resistance to lateral loads.Rate this question:
-
- 41.
Shear wall anchor bolts are 1 ¼” diameter x 24 long.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement is true because shear wall anchor bolts are indeed 1 ¼” in diameter and 24 inches long. This specific size is commonly used in construction to provide strong support and stability to shear walls, which are designed to resist lateral forces such as wind or seismic loads.Rate this question:
-
- 42.
Roof joists slope 5/8” per foot.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
Roof joists do not slope 5/8" per foot. They are typically installed horizontally, parallel to the ground, providing support for the roof structure. Sloping of a roof is achieved through the use of rafters or trusses, not joists. Therefore, the correct answer is false.Rate this question:
-
- 43.
The top of the south bearing wall is 11’ above finished floor level.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement indicates that the top of the south bearing wall is 11 feet above the finished floor level. Since the statement does not provide any contradictory information or indicate any uncertainty, we can assume that the statement is true.Rate this question:
-
- 44.
Truss-bearing metal-framed walls are reinforced with 1 ½” horizontal channel bridging spaced a maximum of 3’-4” OC.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Truss-bearing metal-framed walls require reinforcement to enhance their structural integrity. This reinforcement is achieved by using 1 ½” horizontal channel bridging, which is spaced at a maximum of 3’-4” on center. This bridging helps to distribute the load evenly across the truss-bearing walls, preventing any sagging or failure. Therefore, the statement is true.Rate this question:
-
- 45.
The minimum curb height for Exhaust Fan 2 is 16”.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement is false because the minimum curb height for Exhaust Fan 2 is not 16 inches.Rate this question:
-
- 46.
Diagonal braces for roof trusses are fastened with (what kind) _____ nails.
Correct Answer
8dExplanation
The correct answer is 8d. 8d nails are commonly used to fasten diagonal braces for roof trusses. These nails are 2 ½ inches long and have a thicker shank, providing better holding power and stability for the braces. They are strong enough to withstand the forces and weight exerted on the trusses, ensuring that the braces remain securely in place.Rate this question:
- 47.
Plywood roof sheathing is nailed @ 6” OC.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The correct answer is true because plywood roof sheathing is typically nailed at 6" on center, meaning that nails are spaced 6 inches apart. This spacing ensures that the sheathing is securely attached to the roof structure and can withstand the weight and forces exerted on it. By nailing the sheathing at closer intervals, it provides better support and stability for the roof.Rate this question:
-
- 48.
A total of 156 web stiffeners, which are factory installed, are required.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The statement suggests that 156 web stiffeners are required for a certain purpose, and these stiffeners are factory installed. Therefore, the statement is true as it indicates the specific quantity and method of installation for the required web stiffeners.Rate this question:
-
- 49.
2 sets of door contacts are shown on the Security Plan.
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
The statement suggests that there are two sets of door contacts shown on the Security Plan. However, the correct answer is false, indicating that this statement is not true. Therefore, it can be concluded that the Security Plan does not show two sets of door contacts.Rate this question:
-
- 50.
Cable access openings through stainless steel must have rubber or plastic grommets.
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
Stainless steel is a conductive material, so cable access openings through it can pose a risk of electrical shock or damage to the cables. Rubber or plastic grommets act as insulators, providing protection and preventing any contact between the cables and the stainless steel, ensuring safety and preventing potential damage. Therefore, it is necessary to use rubber or plastic grommets for cable access openings through stainless steel.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 20, 2023Quiz Edited by
ProProfs Editorial Team -
Jan 18, 2011Quiz Created by
Moroni_1