TRUMPF Software: DOT Matrix Code! Quiz
(183).jpg "TRUMPF Software: DOT Matrix Code! Quiz - Quiz")
Do you know anything about the TRUMPF software dot matrix? Would you be able to pass this quiz? With the Dot Matrix Code, your parts are quickly and efficiently labeled with a code. With this code, you can access information and simplify procedures in the process chain. It combines all functions of the marketing software in one single user interface. If you want to put your knowledge to the test, this is the quiz for you.
- 1.What type of code is a Data Matrix?
- A.
2D
- B.
1D
- C.
3D
- D.
None of the above
- 2.What is the most commonly used Data Matrix Code standard?
- A.
AIM DPM
- B.
ECC 200
- C.
UID
- D.
CEC 200
- 3.What is the solid bar in the shape of an L referred as?
- A.
Quiet zone
- B.
Fixed Pattern
- C.
Finder pattern
- D.
Up and Across
- 4.When you read a Data Matrix, what information do you get?
- A.
Size
- B.
Contrast of mark
- C.
Grading of code
- D.
Data in the code
- 5.What is the degree angle for Darkfield lighting of a verifier?
- A.
30 degrees
- B.
No illumination (it's dark)
- C.
90 degrees
- D.
180 degrees
- 6.90 degree lighting of a Verifier is referred to as?
- A.
Standard illumination
- B.
Bright field
- C.
Straight down
- D.
Grey field
- 7.What is the minimal acceptible rating for a 2D code under the AIM DPM standard?
- A.
2.0
- B.
3.0
- C.
1.0
- D.
4.0
- 8.What year is full compliance for UID required?
- A.
UID compliance is not mandatory
- B.
2015
- C.
2005
- D.
2010
- 9.What does DPM stand for?
- A.
Dot Peen Marking
- B.
Direct Part Marking
- C.
Defense Part Marking
- D.
None of the above
- 10.What is common accepted maximum HAZ for DPM on critical stress components for Aerospace?
- A.
.001"
- B.
.0004"
- C.
.004"
- D.
.00001"
- 11.What's the name for the standard for passivation in the Medical Industry?
- A.
TruTops Mark Navigator
- B.
ECC 200
- C.
No standards defined
- D.
ASTM 380
- 12.When you verify a Data Matrix, what information is given?
- A.
Contrast of mark
- B.
Size
- C.
Data in the code
- D.
Grade of code
- 13.What has the FDA termed as the name for it's requirements on marking?
- A.
UDI
- B.
DUI
- C.
MediMark
- D.
ASTM 380
- 14.You encounter a plastic application where no laser type achieves the required mark quality (contrast) or mark speed. What other options do you have?
- A.
Recommend ink jet
- B.
Applying special laser marking pigments to the material
- C.
Corona treatment of surface
- D.
Pretreatment of surface with pilot laser
- 15.What is the laser of choice for marking Day/Night devices?
- A.
TruMark 3020
- B.
TruMark 5020
- C.
TruMark 3130
- D.
TruMark 6020
- 16.What is the laser of choice for marking Powertrain Components?
- A.
TruMark 3130
- B.
TruMark 3230
- C.
TruMark 6130
- D.
TruMark 6020
- 17.Why is MOF used for laser marking of wires?
- A.
Marking after an extruder requires continuous marking processes
- B.
At high speeds the wires tend to fly
- C.
Wires cannot be marked with a laser
- D.
Laser marking is faster than ink jet
- 18.Why is redundancy in a 2D code important?
- A.
The code can be marked smaller
- B.
It allows error correction
- C.
Reading the code requires less depth
- D.
2D codes have never redundancy
- 19.What is the standard depth requirement for serial numbers in the Gun industry
- A.
.001 - .002"
- B.
.020 - .030"
- C.
.004 - .006"
- D.
< .0004"
- 20.What laser has proven itself in the gun industry to achieve the depth in a timely manner for marking serial numbers?
- A.
TruMark 3020
- B.
TruMark 3130
- C.
TruMark 6130
- D.
TruMark 5020
- 21.What System is most desirable for Job Shops because of flexibility and versatility?
- A.
TruMark 3130 in a TruMark Station 7000
- B.
TruMark 3020 in a TruMark Station 5000 NEW
- C.
TruMark 3230 in a TruMark Station 1000
- D.
TruMark 5020 in a TruMark Station 1000
- 22.Which statement is true about laser marking?
- A.
Inkjet is better
- B.
Permanent and flexible
- C.
Does not last long
- D.
Can mark colors easily
- 23.What is the marking of IC's housings referred to as?
- A.
Rear End marking
- B.
Top End marking
- C.
Back End marking
- D.
Bottom End marking
- 24.What type of barcode is a conventional BC 39?
- A.
QR
- B.
2D
- C.
1D
- D.
None of the above
Questions: 15 | Attempts: 36428 | Last updated: Mar 22, 2022
-
Sample QuestionWhich color mode does a computer monitor use, and which does a printer use?
Questions: 10 | Attempts: 28262 | Last updated: Mar 22, 2022
-
Sample QuestionWhich one of the following is not a Scrum role?
Questions: 20 | Attempts: 14345 | Last updated: Mar 22, 2022
-
Sample QuestionWho is the Reporter IN JIRA?
- Binary Code Quizzes
- Computer Concept Quizzes
- Computer Essential Quizzes
- Computer Forensics Quizzes
- Computer Hardware Quizzes
- Computer Networking Quizzes
- Computer Parts Quizzes
- Computer Programming Quizzes
- Computer Science Quizzes
- Computer Security Quizzes
- Computer Shortcut Key Quizzes
- Computer Skills Quizzes
- Computer Virus Quizzes
- Cyber Security Quizzes
- Data Quizzes
- Data Security Quizzes
- Hacking Quizzes
- Hci Quizzes
- Internet Quizzes
- It Security Quizzes
- Malware Quizzes
- Microprocessor Quizzes
- Network Quizzes
- Operating System Quizzes
- Phishing Quizzes
- Programming Language Quizzes
- Server Quizzes
Back to top