Hybrid Book - Chapter 7
-
One type of power transistor typically used in a power inverter is the ___.
-
MOSFET
-
FET
-
MITFET
-
IGFET
-
Explore the specifics of power inverters in hybrid vehicles with 'Hybrid Book - Chapter 7'. This quiz covers the location and technology of inverters in models like Honda Civic and Toyota Prius, focusing on components like MOSFETs and PWM for electric machine control.
Quiz Preview
- 2.
An IGBT contains ___ transistor technologies.
-
MOSFET and bipolar
-
Bipolar and unijunction
-
Bipolar and gate turn-off
-
Thyristor and bipolar
Correct Answer
A. MOSFET and bipolarExplanation
An IGBT (Insulated Gate Bipolar Transistor) contains both MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) and bipolar transistor technologies. The MOSFET is responsible for the input and output characteristics of the IGBT, while the bipolar transistor is responsible for the high voltage and current handling capabilities. This combination allows the IGBT to have the advantages of both technologies, such as high input impedance and fast switching speeds from the MOSFET, and high current and voltage capabilities from the bipolar transistor.Rate this question:
-
- 3.
The power inverter in a Toyota Prius can be found ___.
-
Behind the left kick panel
-
Behind the glove box
-
Behind the rear seat
-
In the engine compartment
Correct Answer
A. In the engine compartmentExplanation
The power inverter in a Toyota Prius is located in the engine compartment.Rate this question:
-
- 4.
___ is used to create an electric machine sine wave.
-
PWM
-
Triangle modulation
-
Flux vectoring
-
Unijunction angling
Correct Answer
A. PWMExplanation
PWM stands for Pulse Width Modulation, which is a technique used to create a sine wave in electric machines. It involves rapidly switching the voltage on and off at a fixed frequency, with the duration of each on and off period varying to create the desired waveform. By adjusting the width of the pulses, the average voltage can be controlled, resulting in a smooth sine wave output. PWM is commonly used in applications such as motor control and power electronics to efficiently control the speed and power output of electric machines.Rate this question:
-
- 5.
One of the primary functions of the flyback diode in an IGBT package is to steer electrical current during ___ mode.
-
Advanced torque
-
Regenerative
-
Reverse
-
Machine start
Correct Answer
A. RegenerativeExplanation
The flyback diode in an IGBT package is primarily used to steer electrical current during regenerative mode. In regenerative mode, the IGBT switches from conducting to blocking mode, causing the energy stored in the inductive load to be released back into the circuit. This can generate a reverse voltage spike, which can damage the IGBT. The flyback diode provides a path for this reverse current, protecting the IGBT from damage by redirecting the energy back into the circuit.Rate this question:
-
- 6.
Reactive power is generated during ___ mode when the magnetic fields of the rotor cut across the stator pole windings.
-
Electric-assist propulsion
-
Regenerative braking
-
Capacitance charging
-
Boost converter
Correct Answer
A. Regenerative brakingExplanation
Reactive power is generated during regenerative braking mode when the magnetic fields of the rotor cut across the stator pole windings. During regenerative braking, the electric motor acts as a generator, converting the kinetic energy of the vehicle into electrical energy. This process involves the creation of magnetic fields, which cut across the stator pole windings and result in the generation of reactive power. This reactive power is necessary for the proper functioning of the electrical system during regenerative braking.Rate this question:
-
- 7.
In a basic power inverter system, ___ transistors are used to drive a 3-phase electric machine.
-
3
-
6
-
12
-
24
Correct Answer
A. 6Explanation
In a basic power inverter system, 6 transistors are used to drive a 3-phase electric machine. This is because a 3-phase electric machine requires 6 switches to control the flow of current in its three windings. Each phase of the machine needs two transistors, one for the positive half cycle and one for the negative half cycle, resulting in a total of 6 transistors.Rate this question:
-
- 8.
To increase the electrical current to the electric machine stator coils, a power inverter must command sine wave amplitude to ___.
-
Increase
-
Decrease
-
Remain unchanged
-
Shut off for at least 3 seconds
Correct Answer
A. IncreaseExplanation
To increase the electrical current to the electric machine stator coils, the power inverter needs to command an increase in the sine wave amplitude. This means that the power inverter must increase the magnitude of the sine wave signal it generates, which in turn will result in a higher electrical current flowing through the stator coils of the electric machine.Rate this question:
-
- 9.
The power inverter in a Honda Civic Hybrid can be found ___.
-
Behind the left kick panel
-
Behind the glove box
-
Behind the rear seat
-
In the engine compartment
Correct Answer
A. Behind the rear seatExplanation
The power inverter in a Honda Civic Hybrid can be found behind the rear seat.Rate this question:
-
- 10.
Voltage boosting of the power inverter is used by ___.
-
Toyota and Lexus
-
GM and Honda
-
Toyota and GM
-
Ford and Lexus
Correct Answer
A. Toyota and LexusExplanation
Voltage boosting of the power inverter is used by Toyota and Lexus. This means that Toyota and Lexus vehicles have a power inverter that is capable of increasing the voltage of the electrical system. This can be useful for various purposes, such as powering high-voltage devices or improving the efficiency of the electrical system. Other car manufacturers, such as GM and Honda, may not have this feature in their vehicles. Ford and Lexus are not mentioned in relation to voltage boosting of the power inverter.Rate this question:
-
- 11.
A six-pack motor drive has ___ IGBTs.
-
3
-
6
-
12
-
36
Correct Answer
A. 6Explanation
A six-pack motor drive typically consists of six IGBTs. These IGBTs are used to control the power flow to the motor, allowing for precise control and efficient operation. Therefore, the correct answer is 6.Rate this question:
-
- 12.
The sum of power concept is based on ___ difference between the rotor and stator.
-
Voltage
-
Current
-
Triggering
-
Control
Correct Answer
A. VoltageExplanation
The sum of power concept is based on the voltage difference between the rotor and stator. This voltage difference is essential for the transfer of electrical energy from the stator to the rotor, enabling the generation of power in electrical machines such as generators and motors. Without a voltage difference, there would be no power transfer and the machines would not function.Rate this question:
-
- 13.
Increasing the voltage to the electric machine also increase the ___.
-
Horsepower
-
Torque
-
Speed
-
All of the above
Correct Answer
A. All of the aboveExplanation
Increasing the voltage to the electric machine will increase the power output, which directly affects all of the given options. Increasing the voltage will result in an increase in horsepower, as more power is being delivered to the machine. It will also increase torque, as torque is directly proportional to the power output. Finally, increasing the voltage will increase the speed of the electric machine, as more power allows it to operate at higher RPMs. Therefore, all of the above options are correct.Rate this question:
-
- 14.
The power inverter senses the ___ to control the amount of regenerative power generated during braking or vehicle coast.
-
IGBT temperature
-
Vehicle speed
-
Battery-pack state of charge
-
Electric machine field vector
Correct Answer
A. Battery-pack state of chargeExplanation
The power inverter needs to sense the battery-pack state of charge in order to control the amount of regenerative power generated during braking or vehicle coast. This is because the state of charge of the battery pack indicates how much energy is available for regeneration. By monitoring the state of charge, the power inverter can adjust the amount of regenerative power generated to optimize energy efficiency and ensure that the battery pack is not overcharged or depleted.Rate this question:
-
- 15.
___ is a technique used to increase the available voltage to a motor by using waveforms other than sine waves.
-
Overmodulation
-
Voltage boosting
-
Boost converting
-
Voltage bucking
Correct Answer
A. OvermodulationExplanation
Overmodulation is a technique used to increase the available voltage to a motor by using waveforms other than sine waves. By exceeding the normal limits of modulation, the amplitude of the waveform is increased, resulting in a higher voltage output. This can be beneficial in certain applications where higher voltage is required to drive the motor efficiently.Rate this question:
-
- 16.
The power inverter controller must ___ to the IGBT to increase the voltage level to the electric machine.
-
Increase frequency
-
Increase PWM
-
Decrease frequency
-
Decrease PWM
Correct Answer
A. Increase PWMExplanation
The power inverter controller needs to increase the PWM (Pulse Width Modulation) to increase the voltage level to the electric machine. PWM is a technique used to control the average voltage delivered to a load by varying the width of the pulses in a digital signal. By increasing the PWM, the controller can increase the voltage level, allowing for higher power output to the electric machine.Rate this question:
-
- 17.
One of the reasons that a power inverter control system uses different waveforms to power an electric machine is to ___.
-
Decrease maximum speed
-
Decrease slip angles
-
Maintain bus voltage level
-
None of the above
Correct Answer
A. Maintain bus voltage levelExplanation
A power inverter control system uses different waveforms to power an electric machine in order to maintain the bus voltage level. This is important because the bus voltage level needs to be regulated and kept within a certain range to ensure the proper functioning of the electric machine. By using different waveforms, the power inverter control system can adjust the voltage output to match the required bus voltage level, thus maintaining its stability and preventing any potential damage or malfunctioning.Rate this question:
-
- 18.
The ___ control algorithm achieves torque control by controlling the phase electrical current in the stator coils and by controlling the slip frequency.
-
Torque ripple
-
Overmodulation
-
Slip
-
Reactive power
Correct Answer
A. SlipExplanation
The slip control algorithm achieves torque control by controlling the phase electrical current in the stator coils and by controlling the slip frequency. The slip frequency is the difference between the electrical frequency of the stator and the mechanical frequency of the rotor. By adjusting the slip frequency, the control algorithm can regulate the torque output of the motor. This allows for precise control of the motor's performance and ensures that the desired torque is achieved.Rate this question:
-
- 19.
There are ___ basic waveforms for electric machine control.
-
2
-
3
-
4
-
6
Correct Answer
A. 4Explanation
There are four basic waveforms for electric machine control.Rate this question:
-
- 20.
___ IGBTs are required to turn on two phases of a wye-connected stator.
-
Two
-
Three
-
Six
-
Eight
Correct Answer
A. TwoExplanation
IGBTs (Insulated Gate Bipolar Transistors) are electronic devices used for switching applications in power electronics. In this context, when referring to a wye-connected stator, it means a three-phase AC induction motor. A wye-connected stator has three phases, and each phase requires a separate IGBT to control the current flow. Therefore, two IGBTs are required to turn on two phases of a wye-connected stator, while the third phase is controlled separately.Rate this question:
-
- 21.
The boost converter is primarily used in the power inverter to ___.
-
Increase horsepower and torque
-
Decrease battery-pack size
-
Reduce back EMF
-
All of the above
Correct Answer
A. Increase horsepower and torqueExplanation
The boost converter is primarily used in the power inverter to increase the voltage level of the input power source. This higher voltage is then used to increase the horsepower and torque of the motor. Therefore, the correct answer is "increase horsepower and torque".Rate this question:
-
- 22.
If the power inverter controller were to request only an increase in speed (or rpm), the ___ must increase.
-
Waveform amplitude
-
Number of rotor bars
-
Number of magnets
-
Stator frequency
Correct Answer
A. Stator frequencyExplanation
When the power inverter controller requests an increase in speed (or rpm), the stator frequency must also increase. The stator frequency determines the speed at which the magnetic field rotates in the motor. By increasing the stator frequency, the motor can spin faster and achieve the desired increase in speed. Therefore, the stator frequency is directly related to the speed of the motor and needs to be increased when a speed increase is requested.Rate this question:
-
- 23.
The sum of power concept is very similar to the function of a(n) ___.
-
Alternator and generator rotor
-
Battery and cranking motor
-
Charging system indicator bulb
-
High-voltage vehicle light
Correct Answer
A. Charging system indicator bulbExplanation
The sum of power concept refers to the total amount of power being generated or consumed in a system. In this context, the charging system indicator bulb is similar to the sum of power concept because it provides a visual indication of the charging system's functionality. Just like the sum of power concept gives an overall understanding of the power flow in a system, the charging system indicator bulb gives an indication of whether the charging system is working properly or not. Both provide a way to monitor and assess the power-related aspects of a system.Rate this question:
-
Quiz Review Timeline (Updated): Mar 21, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Dec 19, 2012Quiz Created by
Tacowallace
Back to top