C-130h Hercules APU Run Test: Quiz!

Reviewed by Editorial Team
The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.
Learn about Our Editorial Process
| By Joseph
J
Joseph
Community Contributor
Quizzes Created: 1 | Total Attempts: 2,112
| Attempts: 2,112
SettingsSettings
Please wait...
  • 1/60 Questions

    Hearing protection is required for everyone in the vicinity of the airplane when the APU is running.

    • True
    • False
Please wait...
About This Quiz

The C-130 Hercules is an American four-engine turboprop military transport aircraft. Do you know about military flights? How much do you know the IAW 1C-130H-2 JG-00-1-1 operates? Take up the c-130h Apu run test and see how much you know about it. All the best!

C-130h Hercules APU Run Test: Quiz! - Quiz

Quiz Preview

  • 2. 

    You have to clear the props every time before you apply bleed air pressure to the manifold.

    • True

    • False

    Correct Answer
    A. True
    Explanation
    Clearing the props before applying bleed air pressure to the manifold is necessary to ensure the safety and efficiency of the system. Clearing the props involves ensuring that the propellers are in a position where they will not cause any damage or interference when the bleed air pressure is applied. This step is important to prevent any potential accidents or damage to the aircraft. Therefore, the statement is true.

    Rate this question:

  • 3. 

    The following are required prior to APU start:

    • NLG ground pin

    • Airplane statically grounded

    • Wheels chocked

    • All of the above

    Correct Answer
    A. All of the above
    Explanation
    Prior to starting the APU, it is necessary to have the NLG ground pin in place, which ensures the aircraft is properly grounded. Additionally, the airplane must be statically grounded to prevent any electrical discharge. Lastly, the wheels should be chocked to prevent any movement of the aircraft during the APU start. Therefore, all of the given options are required prior to starting the APU.

    Rate this question:

  • 4. 

    You MAY operate the APU if the APU fuel shutoff valve is not operating properly.

    • True

    • False

    Correct Answer
    A. False
    Explanation
    Operating the APU with a malfunctioning APU fuel shutoff valve is not recommended. The APU fuel shutoff valve is responsible for controlling the flow of fuel to the APU. If it is not operating properly, it could result in fuel leakage or other safety hazards. Therefore, it is important to ensure that the APU fuel shutoff valve is functioning correctly before operating the APU.

    Rate this question:

  • 5. 

    If the APU fire warning system is not operating properly you may:

    • Still Run APU

    • Still run with fireguard

    • Still run with communications with tower

    • Not run

    Correct Answer
    A. Not run
    Explanation
    If the APU fire warning system is not operating properly, it is not safe to run the APU. The fire warning system is designed to detect and alert the crew in case of a fire in the APU. Without a functioning fire warning system, there is a risk of not being able to detect a potential fire, which could lead to a dangerous situation. Therefore, the correct course of action would be to not run the APU until the fire warning system is fixed.

    Rate this question:

  • 6. 

    If the APU has been operated on recently, APU components and oil in APU may be hot enough to cause burns.

    • True

    • False

    Correct Answer
    A. True
    Explanation
    If the APU (Auxiliary Power Unit) has been used recently, it is likely that its components and the oil inside it are still hot. This means that if someone were to come into contact with these hot components or oil, they could potentially get burned. Therefore, the statement "If the APU has been operated on recently, APU components and oil in APU may be hot enough to cause burns" is true.

    Rate this question:

  • 7. 

    How many people are required to run APU?

    • 1

    • 2

    • 3

    • 4

    Correct Answer
    A. 2
    Explanation
    The question asks for the number of people required to run APU. The correct answer is 2, which implies that APU requires two people to operate it efficiently.

    Rate this question:

  • 8. 

    What fuel tank does the APU get its fuel from?

    • 1

    • 2

    • 3

    • 4

    Correct Answer
    A. 2
    Explanation
    The APU (Auxiliary Power Unit) gets its fuel from the aircraft's main fuel tanks. These tanks contain the fuel that is used by the engines during flight. The APU is a small turbine engine located at the rear of the aircraft, and it provides power for various functions such as starting the main engines, operating electrical systems, and providing air conditioning when the main engines are not running. Since the APU is an integral part of the aircraft, it relies on the same fuel source as the main engines, which is the main fuel tanks.

    Rate this question:

  • 9. 

    You are required to monitor the UHF radio set to ground control frequency for emergency communications.

    • True

    • False

    Correct Answer
    A. True
    Explanation
    The statement is asking if it is necessary to monitor the UHF radio set to ground control frequency for emergency communications. The correct answer is "True" because monitoring the UHF radio set to ground control frequency is essential in order to receive emergency communications and respond accordingly.

    Rate this question:

  • 10. 

    What is the first step in the APU emergency shutdown steps?

    • DISCHARGE AGENT

    • PULL FIRE CONTROL HANDLE.

    • EVACUATE AIRPLANE.

    • CALL GROUND

    Correct Answer
    A. PULL FIRE CONTROL HANDLE.
    Explanation
    The correct answer is "PULL FIRE CONTROL HANDLE." In the event of an APU emergency shutdown, the first step is to pull the fire control handle. This action helps to cut off the fuel supply and electrical power to the APU, preventing any further damage or potential fire hazards. It is a crucial initial step in ensuring the safety of the aircraft and its occupants.

    Rate this question:

  • 11. 

    What may result if you hold the AGENT DISCHARGE switch for more than the recommended time?

    • Blow up a fire bottle

    • Nothing; it will operate normally.

    • Cause the fire extinguisher circuit breaker to trip and the system to become inop.

    • Discharge the agent.

    Correct Answer
    A. Cause the fire extinguisher circuit breaker to trip and the system to become inop.
    Explanation
    If the AGENT DISCHARGE switch is held for more than the recommended time, it can cause the fire extinguisher circuit breaker to trip and the system to become inoperable. This means that the fire extinguisher system will not be able to function properly, potentially leading to a dangerous situation if there is a fire. It is important to follow the recommended procedures and guidelines to ensure the safe and effective operation of the fire extinguisher system.

    Rate this question:

  • 12. 

    How should all 5 fire handles be positioned prior to starting APU?

    • APU pushed in, all of the rest pulled.

    • All pushed in.

    • All pulled out

    • APU pulled out, all of the rest pushed in

    Correct Answer
    A. All pushed in.
    Explanation
    Prior to starting the APU, all 5 fire handles should be positioned in the "pushed in" position. This means that the APU fire handle should be pushed in, and all the other fire handles should also be pushed in. This is the correct position to ensure that the fire suppression system is not activated and that there are no false alarms or accidental discharges of the fire extinguishing agent.

    Rate this question:

  • 13. 

    If the APU fire warning system is not operating properly you may run the APU.

    • True

    • False

    Correct Answer
    A. False
    Explanation
    If the APU fire warning system is not operating properly, it is not safe to run the APU. The fire warning system is designed to detect any potential fire in the APU and alert the pilot. Without a functioning fire warning system, the pilot would not be aware of any fire hazard, increasing the risk of an APU fire going undetected and potentially causing a catastrophic event. Therefore, it is important to ensure that the APU fire warning system is working properly before running the APU.

    Rate this question:

  • 14. 

    The minimum fuel level required in the fuel tank prior to APU operation is:

    • As much as you want.

    • 2000 lbs

    • 1000 lbs

    • 1500 lbs

    Correct Answer
    A. 2000 lbs
    Explanation
    The minimum fuel level required in the fuel tank prior to APU operation is 2000 lbs. This is because the APU (Auxiliary Power Unit) requires a certain amount of fuel to operate effectively. Having a minimum fuel level of 2000 lbs ensures that there is enough fuel to power the APU and perform its functions without any issues.

    Rate this question:

  • 15. 

    If you have frost but no ice on the intake screen you can still run the APU. 

    • True

    • False

    Correct Answer
    A. True
    Explanation
    If there is frost on the intake screen but no ice, it means that the temperature is low enough to cause frost to form, but not low enough for the frost to turn into ice. The presence of frost indicates that there is moisture in the air, which can potentially damage the APU. However, since there is no ice, it suggests that the APU can still be operated safely without the risk of ice causing any issues. Therefore, the statement "If you have frost but no ice on the intake screen you can still run the APU" is true.

    Rate this question:

  • 16. 

    IF there is a fire in the APU compartment what is the proper position of the AGENT DISCHARGE switch?

    • AGENT DISCHARGE switch to #1 and release, if it persists place switch to #2 and release.

    • Place switch to discharge agent.

    • Place switch to fire bottle.

    • Place switch to #1 position and hold it for 10 sec; if fire persists, evacuate airplane.

    Correct Answer
    A. AGENT DISCHARGE switch to #1 and release, if it persists place switch to #2 and release.
    Explanation
    In the event of a fire in the APU compartment, the proper position for the AGENT DISCHARGE switch is to place it to #1 and release. If the fire persists, the switch should then be placed to #2 and released. This suggests that there are two different levels or options for discharging the agent, and if the first option does not extinguish the fire, the second option should be tried.

    Rate this question:

  • 17. 

    What should the frequency meter indicate for proper reading?

    • 110-124 Hz

    • 390-430 Hz

    • 380-420 Hz

    • Doesn’t have a limit

    Correct Answer
    A. 380-420 Hz
    Explanation
    The frequency meter should indicate a reading between 380-420 Hz for a proper reading. This range of frequencies is the correct range that the meter should measure in order to provide accurate results. Frequencies outside of this range may not be properly detected or measured by the meter.

    Rate this question:

  • 18. 

    When applying bleed air and not using air conditioning, A/C plugs are not required to be removed.

    • True

    • False

    Correct Answer
    A. False
    Explanation
    When applying bleed air and not using air conditioning, A/C plugs are still required to be removed. This is because bleed air is used for other purposes such as pressurization and anti-icing, and not removing the A/C plugs can cause damage or malfunction to the system.

    Rate this question:

  • 19. 

    How do you verify the APU fire warning system is operating properly?

    • Place nacelle overheat switch to test.

    • Place turbine overheat to test.

    • Place fire test switch to test.

    • Place fire test switch to test, ensure all fire indicator warning lights come on.

    Correct Answer
    A. Place fire test switch to test, ensure all fire indicator warning lights come on.
    Explanation
    To verify the APU fire warning system is operating properly, the correct procedure is to place the fire test switch to test and ensure that all fire indicator warning lights come on. This test is necessary to ensure that the system is functioning correctly and that all warning lights are operational. By performing this test, any issues or malfunctions in the APU fire warning system can be identified and addressed promptly.

    Rate this question:

  • 20. 

    If bleed air pressure drops rapidly or there is evidence of excessive duct leakage what should you do?

    • Continue running.

    • Shut the bleed air off and continue running.

    • Shut APU down immediately and correct the problem.

    • Continue running closely monitoring all warning lights.

    Correct Answer
    A. Shut APU down immediately and correct the problem.
    Explanation
    If there is a rapid drop in bleed air pressure or evidence of excessive duct leakage, it is necessary to shut the APU (Auxiliary Power Unit) down immediately and correct the problem. This is because a rapid drop in bleed air pressure or excessive duct leakage can indicate a serious issue with the APU, which could potentially lead to further damage or safety hazards. By shutting the APU down and addressing the problem, any potential risks can be mitigated and the aircraft can be safely operated.

    Rate this question:

  • 21. 

    To check the fuel strainer, you should do what?

    • Place a container under it, depress drain valve and ensure fuel flows continuously.

    • Verify fuel flow stops.

    • Place a container under it, depress drain valve and ensure fuel flow stops.

    • Don’t check it.

    Correct Answer
    A. Place a container under it, depress drain valve and ensure fuel flow stops.
    Explanation
    To check the fuel strainer, you should place a container under it, depress the drain valve, and ensure that fuel flow stops. This process allows you to collect any fuel that may be draining from the strainer and verify that it is functioning properly. By ensuring that the fuel flow stops, you can confirm that the strainer is effectively filtering out any debris or contaminants from the fuel system.

    Rate this question:

  • 22. 

    If isolated DC power is interrupted while the APU is operating, what will happen?

    • APU will continue to run.

    • You will be given 2 minutes to turn on generator.

    • The control circuit will be opened and cause the APU to stop.

    • You will be given 4 minutes to turn on generator.

    Correct Answer
    A. The control circuit will be opened and cause the APU to stop.
    Explanation
    If the isolated DC power is interrupted while the APU is operating, the control circuit will be opened, causing the APU to stop. This means that the APU will no longer continue to run.

    Rate this question:

  • 23. 

    Once you clear the APU door area and place the APU control switch to run, what should happen?

    • The APU start light should illuminate.

    • The APU door open light should illuminate.

    • The APU door should open.

    • Both B and C.

    Correct Answer
    A. Both B and C.
    Explanation
    Once you clear the APU door area and place the APU control switch to run, both the APU door open light should illuminate and the APU door should open. This means that when the APU control switch is set to run, it activates the mechanism to open the APU door and simultaneously illuminates the APU door open light to indicate that the door is indeed opening.

    Rate this question:

  • 24. 

    What should you do if the pressure drop exceeds the time allotted?

    • Shut down, correct the fault before proceeding.

    • Shut off the divider valve and continue running.

    • Continue running

    • Follow emergency shutdown procedures.

    Correct Answer
    A. Shut down, correct the fault before proceeding.
    Explanation
    If the pressure drop exceeds the time allotted, it is important to shut down the system and correct the fault before proceeding. Continuing to run the system with a significant pressure drop can lead to further damage or malfunction. It is necessary to identify and address the cause of the pressure drop to ensure the system operates safely and efficiently. Following emergency shutdown procedures may also be necessary depending on the severity of the situation.

    Rate this question:

  • 25. 

    On speed, the light comes on and stays on at what percent rpm?

    • 35%

    • 65%

    • 95%

    • 75%

    Correct Answer
    A. 95%
    Explanation
    The correct answer is 95%. This means that when the speed reaches 95% of the maximum revolutions per minute (rpm), the light comes on and stays on. This suggests that the light is a warning or indicator for when the engine is running at a very high speed, close to its maximum capacity.

    Rate this question:

  • 26. 

    If the battery was used to start the APU, how soon should you turn the APU generator on?

    • 2 min.

    • 4 min.

    • As soon as practical to provide electrical power

    • 6 min.

    Correct Answer
    A. As soon as practical to provide electrical power
    Explanation
    The correct answer is "As soon as practical to provide electrical power." When the battery is used to start the APU (Auxiliary Power Unit), it is important to turn on the APU generator as soon as possible to ensure a continuous supply of electrical power. This will help prevent any interruption or loss of power during the operation of the aircraft.

    Rate this question:

  • 27. 

    While monitoring the leading-edge temperature indicators during APU operation you notice a rise in temperature. What does this indicate and what must you do?

    • Leak in cargo comp, A/C, turn bleed air off.

    • Normal operation, keep running, monitor system.

    • Anti-icing valve is open and APU must be shut down.

    • Ambient temperature is hot, normal operation, keep running.

    Correct Answer
    A. Anti-icing valve is open and APU must be shut down.
  • 28. 

    How long may you hold the AGENT DISCHARGE SWITCH for?

    • 1 or 2 Sec

    • 2 Sec

    • 2 min

    • No more than 2 sec

    Correct Answer
    A. No more than 2 sec
    Explanation
    The correct answer is "No more than 2 sec." This means that you should hold the AGENT DISCHARGE SWITCH for a maximum of 2 seconds. Holding it for longer than that may have negative consequences or be unnecessary.

    Rate this question:

  • 29. 

    DC voltmeter should indicate a minimum of how many volts?

    • 0

    • 23

    • 21

    • 24

    Correct Answer
    A. 21
    Explanation
    A DC voltmeter should indicate a minimum of 21 volts. This means that if the voltage being measured is lower than 21 volts, the voltmeter will not provide an accurate reading. Therefore, any voltage below 21 volts will not be detected by the voltmeter.

    Rate this question:

  • 30. 

    The start light must go out within how many min(s)?

    • 1

    • 2

    • 3

    • 4

    Correct Answer
    A. 1
    Explanation
    The start light must go out within 1 minute.

    Rate this question:

  • 31. 

    The aft cargo door and ramp controls should be placed in what positions prior to starting APU?

    • Ramp control to 6N or 3N.

    • Pump to OFF

    • Cargo door manual control handle to neutral position

    • All of the above

    Correct Answer
    A. All of the above
    Explanation
    Prior to starting the APU, the aft cargo door and ramp controls should be placed in specific positions. The ramp control should be set to either 6N or 3N, the pump should be turned off, and the cargo door manual control handle should be in the neutral position. All of these actions are necessary to ensure the proper functioning and safety of the cargo door and ramp controls before starting the APU.

    Rate this question:

  • 32. 

    If there is a failure in the APU inlet door actuator, for GROUND OPERATIONS ONLY, you may gain access to the actuator and

    • Reposition the actuator.

    • Can’t do anything

    • Install actuator simulator.

    • A and C

    Correct Answer
    A. A and C
    Explanation
    If there is a failure in the APU inlet door actuator during ground operations, you may gain access to the actuator and reposition it. Additionally, you can also install an actuator simulator. Both options A and C are correct.

    Rate this question:

  • 33. 

    You call the fire department before you notify everyone to evacuate the airplane.

    • True

    • False

    Correct Answer
    A. True
    Explanation
    In case of an emergency on an airplane, it is important to prioritize the safety of the passengers and crew. By calling the fire department before notifying everyone to evacuate, you ensure that professional help is on the way to handle any potential fires or other emergencies. This allows for a more organized and efficient evacuation process, reducing the risk of injuries and increasing the chances of a successful rescue operation.

    Rate this question:

  • 34. 

    The starter duty cycle is:

    • 1 min on, 1 min off, 1 min on, 4 min off

    • 1 min on, 4 min off

    • 1 min on, 5 min off

    • No duty cycle

    Correct Answer
    A. 1 min on, 4 min off
    Explanation
    The correct answer is 1 min on, 4 min off. This means that the starter is active for 1 minute and then inactive for 4 minutes before being active again. This duty cycle allows for the starter to rest and cool down for a longer period of time compared to the other options, which can help prevent overheating and prolong the lifespan of the starter.

    Rate this question:

  • 35. 

    What position should the plane be parked in?

    • 30 degrees into the wind, if practical.

    • 15 degrees into the wind, if practical.

    • Doesn’t matter

    • Headed into the wind, if practical.

    Correct Answer
    A. Headed into the wind, if practical.
    Explanation
    The correct answer is "Headed into the wind, if practical." This is because parking the plane into the wind allows for better control during takeoff and landing. When the plane is facing into the wind, it experiences increased airflow over the wings, which generates more lift and reduces the groundspeed needed for takeoff. It also allows for better control during landing by reducing the groundspeed and providing a shorter landing distance. However, the practicality of parking into the wind depends on factors such as the wind direction and the available parking space.

    Rate this question:

  • 36. 

    After placing the Anti-ice overheat circuit test switch to the test position, what should result?

    • All lights should stay out

    • All six lights should illuminate

    • All seven lights should illuminate

    • Don’t worry about testing them

    Correct Answer
    A. All seven lights should illuminate
  • 37. 

    Prior to starting the APU the condition levers should be in what position?

    • Ground idle

    • Run

    • Ground stop

    • Feather

    Correct Answer
    A. Ground stop
    Explanation
    Prior to starting the APU, the condition levers should be in the "Ground stop" position. This is because the ground stop position ensures that the APU remains off and prevents it from starting unintentionally. It is a safety precaution to ensure that the APU is not running when it is not required, such as during ground operations or maintenance.

    Rate this question:

  • 38. 

    After starting cycle is complete, EGT must not exceed.

    • 640 C

    • 620 C

    • 680 C

    • No Limit.

    Correct Answer
    A. 680 C
    Explanation
    The correct answer is 680 C because EGT (Exhaust Gas Temperature) is a critical parameter in a cycle. If the EGT exceeds a certain limit, it can cause damage to the engine components. Therefore, it is important to ensure that the EGT does not exceed a safe threshold. Out of the given options, 680 C is the highest temperature mentioned, indicating that there is a limit and the EGT must not exceed this value.

    Rate this question:

  • 39. 

    What T.O. is used to service the APU oil tank?

    • 1C-130H-2-71JG-00-2

    • 1C-130H-2-49JG-00-1

    • 1C-130H-2-05JG-00-1.

    • 1C-130H-2-12JG-10-2

    Correct Answer
    A. 1C-130H-2-12JG-10-2
  • 40. 

    On ACFT AF95-1001 and up, the tachometer indicator requires how many VAC and Hz to provide RPM indicators?

    • 24 VAC and 380 Hz

    • 21 VAC and 420 Hz

    • 115 VAC and 400 Hz

    • 110 VAC and 400 Hz

    Correct Answer
    A. 115 VAC and 400 Hz
    Explanation
    The tachometer indicator on ACFT AF95-1001 and up requires 115 VAC and 400 Hz to provide RPM indicators.

    Rate this question:

  • 41. 

    What is the problem when checking bleed air pressure ducts and the pressure drop exceeds the time allotted?

    • The APU isn’t putting out enough pressure.

    • The APU generator is on

    • There is a fault in the bleed air system.

    • All of the above

    Correct Answer
    A. There is a fault in the bleed air system.
    Explanation
    If the pressure drop exceeds the time allotted when checking bleed air pressure ducts, it indicates that there is a fault in the bleed air system. This means that there is a problem with the system that is responsible for supplying air to different parts of the aircraft, such as the cabin and the engines. The pressure drop exceeding the allotted time suggests that there is a leak or some other issue in the system that is causing the air pressure to drop more quickly than it should.

    Rate this question:

  • 42. 

    If the outside temperature is below 0 deg C, 32 deg F, how long must you wait to apply a load to the APU?

    • A. 2 min

    • B. 4 min

    • C. 5 min.

    • D. No warm up period

    Correct Answer
    A. B. 4 min
    Explanation
    When the outside temperature is below freezing point (0 deg C, 32 deg F), it is necessary to wait for a certain period of time before applying a load to the APU (Auxiliary Power Unit). This is because at such low temperatures, the APU needs time to warm up and reach its optimal operating temperature. Waiting for 4 minutes allows the APU to warm up sufficiently before applying a load, ensuring proper functioning and preventing potential damage.

    Rate this question:

  • 43. 

    When checking bleed air pressure ducts, start/stop timing when pressure has dropped to what psi?

    • 35/15 psi

    • 16/8.5 psi

    • 8.5/15 psi

    • 30/15 psi

    Correct Answer
    A. 30/15 psi
    Explanation
    The correct answer is 30/15 psi. When checking bleed air pressure ducts, the start/stop timing should be done when the pressure has dropped to 30/15 psi. This indicates that the pressure has reached a safe level for inspection and maintenance purposes.

    Rate this question:

  • 44. 

    What purpose does the APU door serve?

    • Keeps the FOD down

    • Serves no purpose.

    • Keeps the airflow regulated.

    • Fire containment within a fireproof area.

    Correct Answer
    A. Fire containment within a fireproof area.
    Explanation
    The APU door serves the purpose of fire containment within a fireproof area. This means that in case of a fire in the APU (Auxiliary Power Unit), the door helps to prevent the fire from spreading to other areas of the aircraft by containing it within the designated fireproof area. This is crucial for the safety of the aircraft and its passengers, as it helps to minimize the risk of a fire causing further damage or endangering the flight.

    Rate this question:

  • 45. 

    Failure of the APU inlet door to open could be the result of what?

    • The APU could be low on oil

    • The APU doesn’t have enough hydraulic fluid to open the door.

    • The APU door actuator has failed

    • Both A and C.

    Correct Answer
    A. Both A and C.
    Explanation
    The failure of the APU inlet door to open could be the result of two possible reasons. Firstly, it could be due to the APU being low on oil, which can prevent the door from opening properly. Secondly, it could be because the APU door actuator has failed, which means it is unable to open the door. Therefore, both options A and C are correct explanations for the failure of the APU inlet door to open.

    Rate this question:

  • 46. 

    When starting APU, how many seconds do you have to place the APU control switch to START once it has been moved from STOP?

    • 8

    • 10

    • 4

    • 12

    Correct Answer
    A. 10
    Explanation
    When starting an APU, you have a total of 10 seconds to place the APU control switch to START after it has been moved from STOP. This time frame is crucial to ensure that the APU starts up properly and efficiently. If the switch is not moved to START within 10 seconds, it may cause delays or issues with the APU's functionality.

    Rate this question:

  • 47. 

    What is normal rpm after starting cycle is complete?

    • 94%-102%

    • 102 +/- 1%

    • 100 +/- 2%

    • 96%-100%

    Correct Answer
    A. 102 +/- 1%
    Explanation
    The correct answer is 102 +/- 1%. This means that the normal rpm after the starting cycle is complete can range from 101 to 103, with 102 being the most accurate value. The "+/- 1%" indicates that the rpm can deviate by 1% from the central value of 102. This range allows for slight variations in the rpm while still maintaining the expected normal level.

    Rate this question:

  • 48. 

    If the battery was used for normal shutdown place DC BUS TIE switch to ____ position after the door closes.

    • Off

    • Tied

    • Untied

    • On

    Correct Answer
    A. Untied
    Explanation
    When the battery is used for a normal shutdown, the DC BUS TIE switch should be placed in the "Untied" position after the door closes. This means that the switch should be set to disconnect or separate the two DC bus systems. By untieing the DC bus systems, the battery power is isolated and not connected to the other systems, ensuring a safe shutdown process.

    Rate this question:

  • 49. 

    When checking bleed air pressure ducts stop timing when the pressure has dropped to 15 psi in how many seconds for ACFT AF86-0486 and up?  

    • 30 sec

    • 15 sec

    • 16 sec

    • 8.5 sec

    Correct Answer
    A. 16 sec
    Explanation
    The correct answer is 16 sec. This means that when checking bleed air pressure ducts for ACFT AF86-0486 and up, the timing should be stopped when the pressure drops to 15 psi within 16 seconds.

    Rate this question:

Quiz Review Timeline (Updated): Mar 22, 2023 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Mar 22, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • Aug 28, 2017
    Quiz Created by
    Joseph

Recent Quizzes

RAAF Aircraft Quiz RAAF Aircraft Quiz
2A374 : F-15 Flight Control System and Radar! Hardest Trivia Quiz 2A374 : F-15 Flight Control System and Radar! Hardest Trivia Quiz
Text your Aircraft Recognition Quiz Text your Aircraft Recognition Quiz
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.