Spindle Sander Safety Rules
-
Approved eye protection must be worn while operating the spindle sander.
-
True
-
False
-
About This Quiz
Safety rules for operation of the spindle sander. You must pass the spindle sander safety quiz before using the spindle sander.
Quiz Preview
- 2.
Roll sleeves up past the elbow to ensure that no loose clothing will get caught in the rotating spindle while operating the spindle sander.
-
True
-
False
Correct Answer
A. TrueExplanation
Rolling sleeves up past the elbow is a safety precaution to prevent loose clothing from getting caught in the rotating spindle while operating the spindle sander. This is important because loose clothing can easily get entangled in the machinery, causing accidents or injuries. By rolling up the sleeves, the risk of clothing getting caught in the spindle is minimized, ensuring a safer working environment.Rate this question:
-
- 3.
It is OK to wear bracelets or a watch while operating the spindle sander.
-
True
-
False
Correct Answer
A. FalseExplanation
It is not OK to wear bracelets or a watch while operating the spindle sander because loose jewelry can get caught in the rotating parts of the machine, leading to serious injuries.Rate this question:
-
- 4.
Always be sure to hold your stock tight against the table to prevent the spindle sander from throwing the stock off the table.
-
True
-
False
Correct Answer
A. TrueExplanation
Holding the stock tight against the table while using a spindle sander is important to prevent any accidents or injuries. The spinning motion of the spindle sander can cause the stock to be thrown off the table if it is not held securely. Therefore, it is essential to hold the stock tightly against the table to ensure safety and prevent any mishaps.Rate this question:
-
- 5.
When using the spindle sander sand lightly; do not force stock into the spindle.
-
True
-
False
Correct Answer
A. TrueExplanation
The explanation for the given correct answer is that when using a spindle sander, it is important to sand lightly and not force the stock into the spindle. This is because forcing the stock can lead to uneven sanding and potential damage to the material being worked on. By sanding lightly and allowing the spindle to do the work, a more consistent and controlled sanding result can be achieved.Rate this question:
-
- 6.
When finished working with the spindle sander you should _________.
-
Leave it on and return to your work bench.
-
Turn it off and return to your work bench.
-
Turn it off and remain in the work zone until it completely stops moving
Correct Answer
A. Turn it off and remain in the work zone until it completely stops movingExplanation
After finishing work with the spindle sander, it is important to turn it off to ensure safety. However, simply turning it off is not enough. It is also necessary to remain in the work zone until the sander completely stops moving. This is because the spindle sander may still have residual kinetic energy and could potentially cause harm if someone accidentally comes into contact with it while it is still in motion. Therefore, it is crucial to wait until it comes to a complete stop before leaving the work area.Rate this question:
-
- 7.
It is OK to sand small pieces on the spindle sander.
-
True
-
False
Correct Answer
A. FalseExplanation
It is not safe or recommended to sand small pieces on the spindle sander. The spindle sander is designed for larger, curved surfaces, and using it on small pieces can result in the piece getting caught or thrown off, causing injury or damage. It is best to use a different tool, such as a sanding block or a handheld sander, for smaller pieces.Rate this question:
-
- 8.
Before turning on the spindle sander, make sure your stock is ______touching the spindle
-
Slightly
-
Not
-
Completely
Correct Answer
A. NotExplanation
When using a spindle sander, it is important to ensure that the stock is not touching the spindle completely. This is because the spindle sander operates by rotating the spindle at high speeds, and if the stock is in direct contact with the spindle, it can cause excessive friction and potentially damage the stock or the machine. Therefore, it is necessary to leave a small gap or space between the stock and the spindle to allow for safe and effective sanding.Rate this question:
-
- 9.
It is not necessary to keep your stock on the table while sanding on the spindle sander.
-
True
-
False
Correct Answer
A. FalseExplanation
The statement is suggesting that it is not necessary to keep your stock on the table while sanding on the spindle sander. However, this is incorrect. When using a spindle sander, it is important to keep the stock firmly and securely on the table to ensure stability and accuracy while sanding. This helps to prevent any potential accidents or injuries that may occur if the stock is not properly supported. Therefore, the correct answer is False.Rate this question:
-
- 10.
Keep fingers at least ___inches away from the spindle.
-
1
-
2
-
3
-
4
Correct Answer
A. 2Explanation
To ensure safety while using the spindle, it is important to keep fingers at least a certain distance away from it. The correct answer is 2 inches because this distance provides enough space to prevent accidental contact with the rotating spindle, reducing the risk of injury. Keeping fingers at a greater distance, such as 3 or 4 inches, may be unnecessarily cautious, while keeping them at only 1 inch could potentially lead to accidents. Therefore, 2 inches is the appropriate distance to maintain safety.Rate this question:
-
Quiz Review Timeline (Updated): Mar 21, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Feb 27, 2012Quiz Created by
Bamsteched
Back to top