Router Table Safety Rules: Trivia Quiz!

1. Always keep your hands away from the machine when the blade is running.

True

False

It is important to keep your hands away from the machine when the blade is running to prevent any potential accidents or injuries. The rotating blade can be extremely dangerous and can cause severe cuts or amputations if it comes into contact with hands or fingers. Therefore, it is crucial to follow safety precautions and avoid placing hands near the machine while the blade is in motion.

Explanation

It is important to keep your hands away from the machine when the blade is running to prevent any potential accidents or injuries. The rotating blade can be extremely dangerous and can cause severe cuts or amputations if it comes into contact with hands or fingers. Therefore, it is crucial to follow safety precautions and avoid placing hands near the machine while the blade is in motion.

2. You must wear safety glasses when using the router.

True

False

Safety glasses are necessary when using a router because they provide protection for the eyes against flying debris, wood chips, or any other potential hazards that may occur during the routing process. Wearing safety glasses helps prevent eye injuries and ensures the user's safety while operating the router.

Explanation

Safety glasses are necessary when using a router because they provide protection for the eyes against flying debris, wood chips, or any other potential hazards that may occur during the routing process. Wearing safety glasses helps prevent eye injuries and ensures the user's safety while operating the router.

3. It is ok to talk to another student when using the router.

True

False

It is not okay to talk to another student when using the router. The router is a networking device that connects multiple devices to the internet. It is designed to handle multiple connections simultaneously, but it does not allow direct communication between connected devices. Each device connected to the router has its own IP address and communicates with the internet independently. Therefore, talking to another student directly through the router is not possible.

Explanation

It is not okay to talk to another student when using the router. The router is a networking device that connects multiple devices to the internet. It is designed to handle multiple connections simultaneously, but it does not allow direct communication between connected devices. Each device connected to the router has its own IP address and communicates with the internet independently. Therefore, talking to another student directly through the router is not possible.

4. It is important to keep your work flat against the table when using the router table.

True

False

When using a router table, it is important to keep your work flat against the table because this ensures stability and accuracy in the cutting or shaping process. If the workpiece is not properly supported against the table, it can lead to an uneven cut, loss of control, or even potential safety hazards. Therefore, it is crucial to maintain proper contact between the workpiece and the table to achieve desired results and ensure safe operation.

Explanation

When using a router table, it is important to keep your work flat against the table because this ensures stability and accuracy in the cutting or shaping process. If the workpiece is not properly supported against the table, it can lead to an uneven cut, loss of control, or even potential safety hazards. Therefore, it is crucial to maintain proper contact between the workpiece and the table to achieve desired results and ensure safe operation.

5. When making adjustments to the machine you should always?

Stop the machine

Disconnect the machine

Turn off the machine

Get the instructor

All of the above

When making adjustments to the machine, it is important to follow proper safety protocols. Stopping the machine ensures that it is not in operation while adjustments are being made, reducing the risk of accidents. Disconnecting the machine from its power source further enhances safety by preventing any unexpected start-ups. Turning off the machine is an additional precautionary measure to ensure that it is completely powered down. Lastly, getting the instructor is important as they can provide guidance and supervision during the adjustment process. Therefore, all of the above actions are necessary to ensure the safety and proper adjustment of the machine.

Explanation

When making adjustments to the machine, it is important to follow proper safety protocols. Stopping the machine ensures that it is not in operation while adjustments are being made, reducing the risk of accidents. Disconnecting the machine from its power source further enhances safety by preventing any unexpected start-ups. Turning off the machine is an additional precautionary measure to ensure that it is completely powered down. Lastly, getting the instructor is important as they can provide guidance and supervision during the adjustment process. Therefore, all of the above actions are necessary to ensure the safety and proper adjustment of the machine.

6. When using the router table you should always move your work from?

Left to Right

Right to Left

Top to Bottom

Bottom to Top

When using the router table, it is recommended to move your work from right to left. This is because the rotation of the router bit causes the workpiece to be pushed against the fence, ensuring stability and preventing kickback. Moving the workpiece in the opposite direction may result in the router bit grabbing the workpiece and potentially causing accidents or damage. Therefore, to ensure safety and proper control, it is best to move the workpiece from right to left when using a router table.

Explanation

When using the router table, it is recommended to move your work from right to left. This is because the rotation of the router bit causes the workpiece to be pushed against the fence, ensuring stability and preventing kickback. Moving the workpiece in the opposite direction may result in the router bit grabbing the workpiece and potentially causing accidents or damage. Therefore, to ensure safety and proper control, it is best to move the workpiece from right to left when using a router table.

7. Before using the router students must:

Check to see if the bit is secure

Warn others to stay away

Make all adjustments

Get permission to use the machine

All of the above

The correct answer is "All of the above" because before using the router, students need to perform multiple actions. They must check if the bit is secure to ensure safety. They should also warn others to stay away from the machine to prevent accidents. Additionally, they need to make all necessary adjustments to the router for it to work properly. Lastly, they must obtain permission to use the machine, which may be a requirement set by the institution or instructor.

Explanation

The correct answer is "All of the above" because before using the router, students need to perform multiple actions. They must check if the bit is secure to ensure safety. They should also warn others to stay away from the machine to prevent accidents. Additionally, they need to make all necessary adjustments to the router for it to work properly. Lastly, they must obtain permission to use the machine, which may be a requirement set by the institution or instructor.

8. The __________must be kept clear of scraps and other pieces of work when using the router table.

Wood

Table

Cord

Bulb

Clamp

When using the router table, it is important to keep the table clear of scraps and other pieces of work. This is because having debris on the table can interfere with the smooth movement of the wood being worked on and can also cause the router bit to become clogged or damaged. Keeping the table clear ensures a safe and efficient operation.

Explanation

When using the router table, it is important to keep the table clear of scraps and other pieces of work. This is because having debris on the table can interfere with the smooth movement of the wood being worked on and can also cause the router bit to become clogged or damaged. Keeping the table clear ensures a safe and efficient operation.

9. It is not important to pull your hair back and roll up your sleeves when using the router.

True

False

It is important to pull your hair back and roll up your sleeves when using the router to ensure safety and prevent any accidents or injuries.

Explanation

It is important to pull your hair back and roll up your sleeves when using the router to ensure safety and prevent any accidents or injuries.

10. When using the router you must have your work firmly against the blade before turning it on.

True

False

The statement is false because when using a router, it is important to have your workpiece firmly against the fence or guide, not against the blade. The blade is the cutting component of the router and having the workpiece against it can be dangerous and lead to accidents. The fence or guide helps to keep the workpiece stable and ensures accurate cuts.

Explanation

The statement is false because when using a router, it is important to have your workpiece firmly against the fence or guide, not against the blade. The blade is the cutting component of the router and having the workpiece against it can be dangerous and lead to accidents. The fence or guide helps to keep the workpiece stable and ensures accurate cuts.