Soldering Iron Quiz
The quiz is about the information we have talked about in the powerpoint ,& to see how much you have learnt !
- 1.
Where do you put the soldering iron when you have finished with it ?
- A.
On the desk
- B.
On a peice of paper
- C.
On the floor
- D.
In the stand
- E.
In the cupboard
Correct Answer
D. In the standExplanation
When you have finished using a soldering iron, it is important to place it in the stand. This is because the stand is specifically designed to hold the soldering iron safely and securely. Placing the soldering iron in the stand helps to prevent accidents such as burns or fires, as it keeps the hot tip of the iron away from any flammable materials or surfaces. Additionally, the stand also helps to protect the soldering iron itself from damage, as it provides a stable and upright position for storage.Rate this question:
-
- 2.
What part shouldn't you touch !
- A.
The Plug
- B.
The metal part
- C.
The Handle
- D.
The wire
- E.
Other
Correct Answer
B. The metal partExplanation
The correct answer is the metal part because touching the metal part of a plug while it is plugged in can result in an electric shock. The metal part is conductive and can carry electric current, so touching it can be dangerous. It is important to always unplug an appliance or device before touching the metal part of the plug to ensure safety.Rate this question:
-
- 3.
How hot can the soldering iron get ?
- A.
200
- B.
300
- C.
400
- D.
500
- E.
600
Correct Answer
C. 400Explanation
The correct answer is 400. This suggests that the maximum temperature that the soldering iron can reach is 400 degrees.Rate this question:
-
- 4.
Approximately how far should we stay away from the iron , to avoid being poisoned ?
- A.
30 - 40 cm
- B.
30-40 meters
- C.
30-40 km
- D.
30-40 mm
Correct Answer
A. 30 - 40 cmExplanation
To avoid being poisoned by iron, it is recommended to stay approximately 30-40 cm away from it. This distance is necessary as iron can release toxic fumes when heated or corroded, which can be harmful if inhaled in close proximity. Therefore, maintaining a safe distance is crucial to prevent any potential poisoning.Rate this question:
-
- 5.
What is the main caution of leaving your stool out in the middle of the workshop ?
- A.
Someone could sit on it
- B.
Someone could trip over it
- C.
Someone could loose it
- D.
Someone could brake it
Correct Answer
B. Someone could trip over itExplanation
Leaving a stool out in the middle of the workshop can be dangerous because someone could accidentally trip over it. This could potentially lead to injuries or accidents in the workplace. It is important to keep the workspace clear and organized to prevent any hazards or accidents.Rate this question:
-
- 6.
Roughly how long do you have to leave the iron to cool down ?
- A.
1 second
- B.
1 minute
- C.
1 hour
- D.
1 day
- E.
1 week
Correct Answer
C. 1 hourExplanation
The correct answer is 1 hour. After using an iron, it is recommended to leave it to cool down for at least an hour before storing it. This allows the iron to reach a safe temperature and prevents the risk of accidental burns or fires. Cooling down for a shorter period of time may still pose a danger, while leaving it for longer than an hour is unnecessary.Rate this question:
-
- 7.
What do you smolder ?
- A.
Wire on to the desk
- B.
Wire onto the Project ( Plastic )
- C.
Wire onto the floor
- D.
Wire onto your text book
- E.
Wire onto the computer
Correct Answer
B. Wire onto the Project ( Plastic )Explanation
The correct answer is "Wire onto the Project ( Plastic )". This choice suggests that the act of smoldering is being done onto a plastic project using wire.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Nov 14, 2008Quiz Created by
Demi_fuzz
Back to top