Safety Quiz For Belt Disc Sander
-
Approved eye protection should be worn.
-
True
-
False
-
About This Quiz
This Safety Quiz for Belt Disc Sander assesses knowledge on proper safety protocols when operating a belt disc sander. It covers the importance of eye protection, equipment checks, appropriate attire, and correct operational procedures to ensure safety and prevent accidents.
Quiz Preview
- 2.
The sanding disc and sanding belt should be checked before each use for tears in the material.
-
True
-
False
Correct Answer
A. TrueExplanation
Before using the sanding disc and sanding belt, it is important to check them for tears in the material. This is because tears can affect the performance and effectiveness of the sanding tools. If there are tears present, it is necessary to replace the disc or belt to ensure smooth and efficient sanding. Therefore, the statement "The sanding disc and sanding belt should be checked before each use for tears in the material" is true.Rate this question:
-
- 3.
Long hair and loose clothing must be appropriately confined.
-
True
-
False
Correct Answer
A. TrueExplanation
Long hair and loose clothing should be appropriately confined in certain situations to ensure safety and prevent accidents. Loose clothing can get caught in machinery or equipment, leading to serious injuries. Similarly, long hair can also pose a risk if it gets tangled or caught in moving parts. Therefore, it is important to confine long hair and wear appropriate clothing that fits properly and does not pose any hazards.Rate this question:
-
- 4.
Hands and fingers can be close to the disc or belt.
-
True
-
False
Correct Answer
A. FalseExplanation
This statement is false because hands and fingers should never be close to the disc or belt. It is important to keep a safe distance from rotating machinery to prevent accidents and injuries.Rate this question:
-
- 5.
After the machine has been turned off the belt and disc sander should come to a complete stop before the operator leaves the machine.
-
True
-
False
Correct Answer
A. TrueExplanation
It is important for the belt and disc sander to come to a complete stop before the operator leaves the machine to ensure safety. If the operator leaves the machine while the sander is still running, there is a risk of accidents or injuries. Therefore, it is necessary for the machine to be turned off and for the sander to stop completely before the operator can safely leave the machine.Rate this question:
-
- 6.
The material being sanded should be placed on the table and sanded only on the down stroke side of the disc and the belt.
-
True
-
False
Correct Answer
A. TrueExplanation
The correct answer is true because when sanding with a disc and belt sander, it is important to place the material on the table and sand it only on the down stroke side of the disc and the belt. This ensures that the material is properly sanded and prevents any potential damage or injury that may occur if the material is sanded on the upstroke side.Rate this question:
-
- 7.
Use moderate pressure and move the material being sanded back and forth to avoid heating and burning
-
True
-
False
Correct Answer
A. TrueExplanation
Applying moderate pressure and moving the material being sanded back and forth helps to distribute the heat generated during sanding, preventing excessive heating and burning of the material. This technique allows for a more controlled and even sanding process, ensuring that the material is not damaged or burnt. Therefore, the statement is true.Rate this question:
-
Quiz Review Timeline (Updated): Aug 2, 2024 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Aug 02, 2024Quiz Edited by
ProProfs Editorial Team -
Apr 12, 2011Quiz Created by
Robertmaib
Back to top