Q-sys Training: Public Address

Reviewed by Editorial Team
The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.
Learn about Our Editorial Process
| By Patrick Heyn
P
Patrick Heyn
Community Contributor
Quizzes Created: 30 | Total Attempts: 132,746
| Attempts: 2,907 | Questions: 18
Please wait...
Question 1 / 18
0 %
0/100
Score 0/100
1. MULTIPLE CHOICE What is considered a "High" or "Low" Priority?

Explanation

Priority 1 is considered to have the highest priority because it is stated that "Priority 1 has the highest Priority." This means that when prioritizing tasks or issues, Priority 1 is given the most importance and should be addressed first.

Submit
Please wait...
About This Quiz
Q-sys Training: Public Address - Quiz

Welcome to the Q-Sys™ Public Address Assessment. Please watch all four Public Address videos before attempting this assessment. You must correctly answer 80% of the questions... see moreto successfully pass this assessment.
see less

2. MULTIPLE CHOICE What does the Cancel Delay field adjust?

Explanation

The Cancel Delay field adjusts the length of time that the message will be delayed in case the User wishes to cancel after issuing a Command.

Submit
3. MULTIPLE CHOICE Which component handles all of the transport of pages and messages from Page Stations to Zones?

Explanation

The PA Router component handles all of the transport of pages and messages from Page Stations to Zones. It is responsible for routing the pages and messages to the appropriate destination within the system.

Submit
4. If there are multiple commands waiting in the Queuing system, where will a new Command be placed?

Explanation

A new command will be placed before all commands of lower priority, but behind those of equal priority in the queuing system. This means that if there are multiple commands waiting in the queue, the new command will be prioritized based on its priority level. It will be placed ahead of commands with lower priority, but behind commands with the same priority. This ensures that commands with higher priority are executed first, while still maintaining the order within commands of equal priority.

Submit
5. MULTIPLE CHOICE What does a "Zone Group" button allow you to do on a Virtual Page Station?

Explanation

A "Zone Group" button on a Virtual Page Station allows the user to select a Tag, which in turn allows them to select multiple Zones simultaneously. This feature is useful for managing and controlling multiple Zones at once, providing convenience and efficiency in operating the Virtual Page Station.

Submit
6. MULTIPLE CHOICE Every Page Station on the PA Router component is represented by two pins. What are these two pins?

Explanation

The correct answer is Microphone and Station Control. Each Page Station on the PA Router component is represented by two pins, one for the microphone input and one for the station control. These pins allow for the communication between the PA Router and the Page Station, enabling functions such as audio input and control of the station.

Submit
7. MULTIPLE CHOICE What does the Queue Timeout field adjust?

Explanation

The Queue Timeout field adjusts the length of time a single command can remain in the Queuing system before it is cancelled. This means that if a command exceeds the specified timeout period, it will be removed from the queue and cancelled.

Submit
8. MULTIPLE CHOICE How do you assign Commands to a Page Stations' Command Buttons?

Explanation

To assign Commands to a Page Stations' Command Buttons, you need to go to the Page Stations menu of Administrator. Then, double-click on a Page Station and select its Command Buttons tab. From there, you can choose an available Command for each button. This allows you to customize the commands assigned to each button on the Page Station.

Submit
9. CHECK ALL THAT APPLY If a Command is issued to multiple Zones and only some of them are available, what happens? Check all that apply.

Explanation

If a command is issued to multiple zones and only some of them are available, the command can be handled in two different ways. If the command is selected to split, it will play in the available zones and be queued in the unavailable zones. On the other hand, if the command is not selected to split, it will wait until all zones are available and then play in all of them simultaneously.

Submit
10. MULTIPLE CHOICE How can you add new Zones to your Public Address system?

Explanation

To add new Zones to your Public Address system, you need to increase the Zones field of your PA Router component in its Properties Pane. This means that by modifying the Zones field value, you can add additional Zones to your system.

Submit
11. CHECK ALL THAT APPLY A User issues a Priority 5 Command on a system with global Priority Mode set to Command Priority. Normally this action would be treated as Priority 5. Under which of the following conditions might the action be treated as a different Priority? Check all that apply.

Explanation

If the Page Station has Override Command Priority Level active, it means that the priority level set for the Page Station will take precedence over the global Priority Mode setting. Similarly, if the User has both Override Page Stations settings and Override Command Priority Level active, it means that the user's settings will override the global Priority Mode setting. In both of these cases, the action may be treated as a different priority than Priority 5. However, if none of these conditions are met, there is no way to alter the priority in this scenario.

Submit
12. MULTIPLE CHOICE Where can you find the "Cancel All" button, which will cancel all executing and queued Commands in the entire Public Address system?

Explanation

In the PA Router's Control Panel on the Schematic, you can find the "Cancel All" button, which allows you to cancel all executing and queued Commands in the entire Public Address system.

Submit
13. CHECK ALL THAT APPLY Which main navigation tabs of the Q-Sys Administrator are ONLY available when a Public Address system is present in the design? Check all that apply.

Explanation

The main navigation tabs of the Q-Sys Administrator that are only available when a Public Address system is present in the design are PA Global Settings, Page Stations, and PA Zones. These tabs specifically cater to the configuration and management of the Public Address system, allowing users to adjust global settings, set up page stations, and define PA zones.

Submit
14. MULTIPLE CHOICE How many PA Router Components can be integrated into a single design?

Explanation

Only one PA Router Component can be integrated into a single design.

Submit
15. CHECK ALL THAT APPLY If you have a certain level priority of Pages set to Archive, how can you listen to those saved Pages? Check all that apply.

Explanation

To listen to the saved Pages with a certain level of priority set to Archive, you can navigate to the Audio Files tab, select the Page Archives folder, and click the Play button of the desired Page. Additionally, you can navigate to the Event Log, find the event created by the issued Page, and click the Play button. If you have Enable Archive Export active, you can also visit the FTP site that you specified and listen to the files in that folder.

Submit
16. MULTIPLE CHOICE If a Zone's Squelch Priority is set to Priority 2, which of the following statements are true?

Explanation

If a Zone's Squelch Priority is set to Priority 2, it means that only commands with Priority 1 will be played on this Zone. This implies that any commands with Priority 2 will not be played on this Zone.

Submit
17. CHECK ALL THAT APPLY What types of Commands can be created in the Administrator that are specific to a Public Address system? Check all that apply.

Explanation

The Administrator allows the creation of specific commands for a Public Address system. Two types of commands that can be created are the PA Page Command and the PA Play Message Command. These commands enable the user to make announcements or play pre-recorded messages through the Public Address system. The PA Priority Override Command is not applicable in this context as it is not specific to a Public Address system.

Submit
18. CHECK ALL THAT APPLY What are some of the differences between a Virtual Page Station and a physical Page Station? Check all that apply.

Explanation

The first difference between a Virtual Page Station and a physical Page Station is that with a Virtual Page Station, you must manually select your Zones, Mode, and Priority before issuing a Page or Command. The second difference is that the Virtual Page Station component does not have a Microphone audio pin.

Submit
View My Results

Quiz Review Timeline (Updated): Apr 17, 2024 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Apr 17, 2024
    Quiz Edited by
    ProProfs Editorial Team
  • Aug 14, 2012
    Quiz Created by
    Patrick Heyn
Cancel
  • All
    All (18)
  • Unanswered
    Unanswered ()
  • Answered
    Answered ()
MULTIPLE CHOICE What is considered a "High" or "Low" Priority?
MULTIPLE CHOICE What does the Cancel Delay field adjust?
MULTIPLE CHOICE...
If there are multiple commands waiting in the Queuing system, where...
MULTIPLE CHOICE...
MULTIPLE CHOICE...
MULTIPLE CHOICE What does the Queue Timeout field adjust?
MULTIPLE CHOICE...
CHECK ALL THAT APPLY...
MULTIPLE CHOICE...
CHECK ALL THAT APPLY...
MULTIPLE CHOICE...
CHECK ALL THAT APPLY...
MULTIPLE CHOICE...
CHECK ALL THAT APPLY...
MULTIPLE CHOICE...
CHECK ALL THAT APPLY...
CHECK ALL THAT APPLY...
Alert!

Advertisement