Star Wars Trivia Questions! Ultimate Quiz
-
What Imperial rank did Mitth'raw'nuruodo Thrawn hold in "Star Wars"?
-
Emperor
-
Grand Moff
-
Grand Admiral
-
General
-
Dive into the Star Wars universe with this ultimate trivia quiz! Test your knowledge on characters, plot twists, and iconic moments from the saga. Perfect for enhancing your understanding of the Star Wars series and its impact on film and culture.
(58).jpg "Star Wars Trivia Questions! Ultimate Quiz - Quiz")
Quiz Preview
- 2.
What name did Anakin Skywalker take when he went over to the Dark Side in the "Star Wars" movies?
-
Darth Maul
-
Darth Sidious
-
Darth Vader
-
Darth Tyranus
Correct Answer
A. Darth VaderExplanation
Anakin Skywalker took the name Darth Vader when he went over to the Dark Side in the "Star Wars" movies.Rate this question:
-
- 3.
In the "Star Wars" movies, who is Anakin Skywalker's father?
-
He Has No Father
-
Yoda
-
Qui-Gon Jinn
-
An Anonymous Slave
Correct Answer
A. He Has No FatherExplanation
Anakin Skywalker's father is not mentioned in the "Star Wars" movies. According to the storyline, Anakin's mother, Shmi Skywalker, claims that there was no father involved in his conception, leading to the belief that he was conceived by the Force itself. This makes Anakin unique and sets him on the path to becoming the powerful Jedi and later, the Sith Lord, Darth Vader.Rate this question:
-
- 4.
In the "Star Wars" movies, what are the names of Anakin Skywalker's two children?
-
Luke And Leia
-
Han And Leia
-
Leia And Anakin
-
Luke And Han
Correct Answer
A. Luke And LeiaExplanation
In the "Star Wars" movies, Anakin Skywalker, who later becomes Darth Vader, has two children named Luke and Leia. Luke Skywalker is the protagonist of the original trilogy, while Leia Organa is a key character and leader in the Rebel Alliance. The relationship between Luke and Leia is revealed in "Star Wars: Episode V - The Empire Strikes Back" when it is discovered that they are siblings.Rate this question:
-
- 5.
According to "Star Wars: A New Hope", what was C-3PO's first job?
-
Translation
-
Vehicular Repair
-
Programming Binary Load Lifters
-
Etiquette And Protocol
Correct Answer
A. Programming Binary Load LiftersExplanation
In "Star Wars: A New Hope," C-3PO's first job was programming binary load lifters. This means that he was responsible for programming and operating machines used for lifting heavy loads. This job showcases C-3PO's technical skills and knowledge in programming and machinery.Rate this question:
-
- 6.
What was the serial # of the garbage compactor that Han, Leia, and Luke were trapped in?
-
36237
-
23456
-
3263827
-
NEVER DISCLOSED
Correct Answer
A. 3263827 -
- 7.
Which "Star Wars" fighter did Ackbar help design?
-
X-Wing
-
B-Wing
-
A-Wing
-
S-Wing
Correct Answer
A. B-WingExplanation
Ackbar helped design the B-Wing fighter in "Star Wars". The B-Wing is a versatile starfighter known for its unique rotating cockpit and gyroscopic controls. It was designed to be a heavy assault and reconnaissance craft, capable of taking on both capital ships and starfighters. Ackbar, a skilled military strategist and leader of the Rebel Alliance, played a crucial role in the development of this powerful fighter.Rate this question:
-
- 8.
Which of the following was not a bounty hunter?
-
2-1b
-
Boushh
-
Ig-88
-
4lom
Correct Answer
A. 2-1bExplanation
2-1B was not a bounty hunter. 2-1B was a medical droid and not involved in the profession of capturing fugitives for rewards. Bounty hunters like Boushh, Ig-88, and 4lom were known for their skills in tracking down and apprehending individuals for money.Rate this question:
-
- 9.
Which two suns does the planet Tatooine get its light from in "Star Wars"?
-
Tatoo I And Tatoo II
-
Dantooine II And Correllia IV
-
Yavin IV And Byss
-
Calamari And Anoat V
Correct Answer
A. Tatoo I And Tatoo IIExplanation
In "Star Wars," the planet Tatooine gets its light from two suns, Tatoo I and Tatoo II. This is a unique characteristic of Tatooine and is often depicted in the movies with the presence of two suns in the sky.Rate this question:
-
- 10.
What company manufactured the X-wing?
-
Sorosuub
-
Kuat Shipyards Ltd
-
Incom
-
Sienar Systems
Correct Answer
A. IncomExplanation
Incom is the correct answer because they were the company responsible for manufacturing the X-wing. They were a well-known starship manufacturer in the Star Wars universe and were known for producing a variety of spacecraft, including the iconic X-wing fighter.Rate this question:
-
- 11.
How much was the budget for "Star Wars: A New Hope"?
-
20000000
-
8000000
-
40000000
-
11000000
Correct Answer
A. 11000000Explanation
The budget for "Star Wars: A New Hope" was $11,000,000.Rate this question:
-
- 12.
What was the Millennium Falcon from the "Star Wars" movies originally inspired by?
-
A UFO
-
A Hamburger With An Olive
-
A Pizza Pan
-
A Lighting Fixture
Correct Answer
A. A Hamburger With An OliveExplanation
The Millennium Falcon from the "Star Wars" movies was originally inspired by a hamburger with an olive. This suggests that the design of the spaceship resembles the shape and features of a hamburger, with the olive representing the central cockpit or control center. This unique inspiration adds a playful and imaginative element to the design of the iconic spacecraft.Rate this question:
-
- 13.
In the "Star Wars" series, what type of stock light freighter is the Millennium Falcon?
-
THX-1138
-
GT-128
-
YT-1300
-
COR-97
Correct Answer
A. YT-1300Explanation
The Millennium Falcon is a YT-1300 stock light freighter in the "Star Wars" series.Rate this question:
-
- 14.
In the "Star Wars" movies, who claims to have beaten Han Solo's Kessel run?
-
Wedge Antilles
-
Boshek
-
Admiral Ackbar
-
Biggs Darklighter
Correct Answer
A. BoshekExplanation
Boshek claims to have beaten Han Solo's Kessel run in the "Star Wars" movies.Rate this question:
-
- 15.
In "Star Wars IV: A New Hope", who was Jabba's main rival?
-
Karrde
-
The Emperor
-
Lady Valarian
-
Han Solo
Correct Answer
A. Lady ValarianExplanation
Lady Valarian is the correct answer because she is portrayed as Jabba's main rival in the Star Wars Expanded Universe. In the book "The Hutt Gambit" by A.C. Crispin, Lady Valarian is a powerful crime lord who competes with Jabba for control over criminal activities in the galaxy. She is depicted as a cunning and ruthless character who poses a significant threat to Jabba's criminal empire. While she does not appear in the original Star Wars trilogy, her presence and rivalry with Jabba are established in the Expanded Universe material.Rate this question:
-
- 16.
Which craft has the highest Sublight speed in "Star Wars IV: A New Hope"?
-
Y-Wing Longprobe
-
Tie Starfighter
-
A-Wing Starfighter
-
X-Wing Starfighter
Correct Answer
A. A-Wing StarfighterExplanation
The A-Wing Starfighter has the highest Sublight speed in "Star Wars IV: A New Hope".Rate this question:
-
- 17.
In "Star Wars IV: A New Hope", who was the aide to Grand Moff Tarkin?
-
Chief Takar
-
Commander Praji
-
Bobba Fett
-
Chief Bast
Correct Answer
A. Chief BastExplanation
In "Star Wars IV: A New Hope", Chief Bast was the aide to Grand Moff Tarkin.Rate this question:
-
- 18.
How many times in the original "Star Wars" trilogy was R2-D2 shot with a weapon?
-
Two
-
Three
-
Seven
-
Zero
Correct Answer
A. ThreeExplanation
In the original "Star Wars" trilogy, R2-D2 was shot with a weapon three times. This suggests that R2-D2 faced multiple instances of danger and was targeted by enemies. The fact that he was shot multiple times also emphasizes his resilience and ability to withstand attacks.Rate this question:
-
- 19.
Who was the first high ranking Imperial Darth Vader talked to in A New Hope?
-
Grand Moff Tarkin
-
Admiral Piett
-
Commander Praji
-
Admiral Motti
Correct Answer
A. Commander PrajiExplanation
Commander Praji was the first high ranking Imperial that Darth Vader talked to in A New Hope. In the movie, after the Rebel blockade runner is captured, Darth Vader boards the ship and interrogates Commander Praji about the stolen Death Star plans. This interaction establishes Darth Vader's authority and sets the tone for his character throughout the film.Rate this question:
-
- 20.
On which moon/planet was the Rebel Base situated in "Star Wars: A New Hope"?
-
Endor
-
Alderaan
-
Dantooine
-
Yavin 4
Correct Answer
A. Yavin 4Explanation
In "Star Wars: A New Hope", the Rebel Base was situated on Yavin 4. This is the moon where the Rebel Alliance established their headquarters and planned their attack on the Death Star. Yavin 4 is a lush and forested moon in the Yavin system, known for its ancient temples and the Great Temple that served as the main base for the Rebel Alliance. It was on Yavin 4 that the iconic Battle of Yavin took place, where Luke Skywalker successfully destroyed the Death Star and became a hero of the Rebellion.Rate this question:
-
- 21.
Who played R2-D2 in the "Star Wars" movies?
-
Benjamin Moore
-
Ronald Dahl
-
No One, It Was A Robot
-
Kenny Baker
Correct Answer
A. Kenny BakerExplanation
Kenny Baker played R2-D2 in the "Star Wars" movies.Rate this question:
-
- 22.
In "Star Wars IV: A New Hope", which bounty hunter was the partner of 4-LOM?
-
Dengar
-
Dyyz Nataz
-
Snoova
-
Zuckuss
Correct Answer
A. ZuckussExplanation
In "Star Wars IV: A New Hope," the bounty hunter Zuckuss was the partner of 4-LOM. This can be inferred from the expanded universe material, specifically the novel "Tales of the Bounty Hunters," where it is mentioned that Zuckuss and 4-LOM often worked together as a team. Additionally, in the Star Wars: Bounty Hunter video game, Zuckuss and 4-LOM are shown working together on a mission. Therefore, Zuckuss is the correct answer.Rate this question:
-
- 23.
How many proton torpedoes were fired in the battle of Yavin?
-
4
-
6
-
8
-
2
Correct Answer
A. 4Explanation
In the battle of Yavin, a total of 4 proton torpedoes were fired.Rate this question:
-
- 24.
In the original "Star Wars" trilogy, where was the only written or printed text in English?
-
No Place In The Trilogy
-
Probe Droid Readout In Executor
-
Computer Console On Hoth
-
Death Star's Tractor Beam Controls
Correct Answer
A. Death Star's Tractor Beam ControlsExplanation
In the original "Star Wars" trilogy, the only written or printed text in English was found on the Death Star's Tractor Beam Controls. This suggests that the Death Star, a massive space station, had controls and instructions written in English for the convenience of its users. The other options, such as the Probe Droid Readout in Executor, Computer Console on Hoth, and No Place in the Trilogy, did not have any written or printed text in English.Rate this question:
-
- 25.
In an early script for "Star Wars Episode IV: A New Hope", Luke Skywalker had which different name?
-
Han Skywalker
-
Luke Starkiller
-
Anakin Skywalker
-
Luke Starwalker
Correct Answer
A. Luke StarkillerExplanation
In an early script for "Star Wars Episode IV: A New Hope", Luke Skywalker had the different name of Luke Starkiller. This name change was made before the final version of the movie was released.Rate this question:
-
- 26.
Which of these actors hasn't helped portray Darth Vader in the "Star Wars" series?
-
Anthony Daniels
-
David Prowse
-
James Earl Jones
-
Sebastian Shaw
Correct Answer
A. Anthony DanielsExplanation
Anthony Daniels is the actor who portrayed the character of C-3PO in the "Star Wars" series, not Darth Vader. The character of Darth Vader was portrayed by David Prowse in the physical performance, James Earl Jones provided the voice for Darth Vader, and Sebastian Shaw portrayed Darth Vader's unmasked face in "Return of the Jedi".Rate this question:
-
- 27.
What planet was Wedge Antilles from?
-
Yavin Iv
-
Corellia
-
Tatooine
-
Alderaan
Correct Answer
A. CorelliaExplanation
Wedge Antilles, a prominent character in the Star Wars universe, is known to be from Corellia. Corellia is a planet located in the Core Worlds region and is known for its skilled pilots and shipbuilders. Wedge Antilles, being a skilled pilot himself, hails from this planet, which explains his exceptional flying abilities and his affiliation with the Rebel Alliance.Rate this question:
-
- 28.
In "Star Wars IV: A New Hope", what is the technical name for a Rebel Snowspeeder?
-
Incom T-65
-
Incom T-47
-
Incom T-16
-
YT-1300
Correct Answer
A. Incom T-47Explanation
The correct answer is Incom T-47. In "Star Wars IV: A New Hope," the technical name for a Rebel Snowspeeder is the Incom T-47. This vehicle is famously known for its use in the Battle of Hoth, where it played a crucial role in the Rebel Alliance's defense against the Empire. The Incom T-47 is a versatile and agile aircraft designed for combat in icy and snowy environments.Rate this question:
-
- 29.
What species was Momaw Nadon in "Star Wars IV: A New Hope"?
-
Ithorian
-
Ithullian
-
Aqualish
-
Rodian
Correct Answer
A. IthorianExplanation
In "Star Wars IV: A New Hope," Momaw Nadon is portrayed as an Ithorian. Ithorians, also known as Hammerheads, are a peaceful species characterized by their distinctive head shape and two mouths. Momaw Nadon is seen in the Mos Eisley Cantina, where he is known for his expertise in botany and conservation efforts.Rate this question:
-
- 30.
In "Star Wars: Episode IV - A New Hope", what is the common name for the Incom T-65B Starfighter?
-
Tie Defender
-
X-Wing
-
Skyhopper
-
Y-Wing
Correct Answer
A. X-WingExplanation
The correct answer is X-Wing. In "Star Wars: Episode IV - A New Hope," the common name for the Incom T-65B Starfighter is X-Wing. This iconic starfighter is known for its distinctive X-shaped wings and is frequently used by the Rebel Alliance in their fight against the Galactic Empire. It is a versatile and powerful spacecraft, capable of both space and atmospheric flight, and is often piloted by skilled Rebel pilots such as Luke Skywalker.Rate this question:
-
Quiz Review Timeline (Updated): Mar 19, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 19, 2023Quiz Edited by
ProProfs Editorial Team -
Feb 16, 2015Quiz Created by
Thames
Back to top