connected Vehicle Professional (CVP) I - Q&a Samples
Add text here. . .
- 1.CV research is aimed to enable wireless communications among _____.
- A.
Vehicles
- B.
Infrastructure
- C.
Personal devices
- D.
All listed
- 2.BSM stands for Basic Safety Message.
- A.
True
- B.
False
- 3.Mobility applications require the BSM be transmitted ten times per second.
- A.
True
- B.
False
- 4.Referring to the AERIS BSM Assessment Summary, which of the approaches below is suggested for the collection of emissions data:
- A.
Use of BSM Part I data
- B.
Collect emissions data from vehicle
- C.
Extrapolate eco-trajectory data
- D.
None listed
- 5.To make surface transportation safer, smarter and greener CV research is sponsored by:
- A.
US-DOT
- B.
NASA
- C.
USDA
- D.
NHTSA
- 6.Gen-Y impact on demand for intelligent vehicle features does not include daily connections to _____.
- A.
PC
- B.
Internet
- C.
Smartphone & Apps
- D.
None listed
- 7.Select Driver Assist & ADAS functions not having been strategized for implementation by 2015.
- A.
Park assist
- B.
Blind spot detection
- C.
Collison warning
- D.
Semi-autonomous driving
- 8.When joined together cells provide radio coverage over a wide geographic area.
- A.
True
- B.
False
- 9.A forward channel is used to carry traffic from the MS to the BS.
- A.
True
- B.
False
- 10.All idle mobile stations continuously listen to the paging signal to detect messages directed at them.
- A.
True
- B.
False
- 11.Hand-off initiation involving relative signal strength, select what does not apply.
- A.
Threshold
- B.
Hysteresis
- C.
Hysteresis and Threshold
- D.
None listed
- 12.Does a modem function as modulator or demodulator?
- A.
Modulator
- B.
Demodulator
- C.
Both
- D.
None
- 13.North American operators will accept a device onto their network if other than PTCRB certified.
- A.
True
- B.
False
- 14.Select what does little or nothing to impact CV modem placement.
- A.
Performance certification
- B.
Testing
- C.
Style
- D.
Rigid analysis
- 15.As part of the overall VII program, approximately _____ use cases were developed by various stakeholder groups of which _____ comprised “Day-1 Use Cases.”
- A.
50 / 20
- B.
100 / 20
- C.
200 / 50
- D.
200 / 100
- 16.For CV communications, current focus of use with GENIVI is
- A.
V2I
- B.
V2V
- C.
V2X
- D.
Other
- 17.Research into use of many audible and visual cues in a vehicle has been determined to reduce driver distraction and improve driving safety.
- A.
True
- B.
False
- 18.Select all that apply to primary function(s) in IEEE standard security services.
- A.
Normalizing
- B.
Authentication
- C.
Elliptication
- D.
Encryption
- 19.This is NOT an intelligent vehicle infotainment function example:
- A.
Visualization & remote control
- B.
Incident information to vehicles
- C.
Navigation
- D.
Driver behavior monitoring
- 20.What CV communication architecture implementation strategy would be used if involving a core user interface in car and provision of a data interface to off-board and portable systems?
- A.
Embedded
- B.
Minimalist
- C.
Modular
- D.
Generalized
- 21.CV communication protocol being defined in Europe is:
- A.
WSMP
- B.
Wi-Fi
- C.
IPv6 + TCP/UDP
- D.
Geo-networking
- 22.Each cell is served by at least one fixed-location transceiver known as a cell site or base station
- A.
True
- B.
False
- 23.Standard SAE J2735 primarily pertains to:
- A.
DSRC
- B.
TCP/UDP
- C.
4-IPv6
- D.
None listed
- 24.The BS is fixed and connected to the mobile telephone switching office (MTSO), also known as:
- A.
Mobile Station (MS)
- B.
Mobile Switching Center (MSC)
- C.
Public Switched Telephone Network (PSTN)
- D.
Mobile transceiver
- 25.Dynamic location update schemes allow per-user________ of the location update frequency.
- A.
Redirecting
- B.
Allocation
- C.
Parameterization
- D.
Share-assigning
Featured Quizzes
Back to top