Kona MTB Gravity Test

1. What is the Kona reference for the derailleur hanger used on the MY14 Carbon Operator line?

II

VV

TT

H

The Kona reference for the derailleur hanger used on the MY14 Carbon Operator line is TT.

Explanation

The Kona reference for the derailleur hanger used on the MY14 Carbon Operator line is TT.

2. With the Rock Shox Boxxer in its lowest position what is the head angle of the MY14 Carbon Operator line?

64

65

63.5

66

The head angle of the MY14 Carbon Operator line is 64 degrees when the Rock Shox Boxxer is in its lowest position.

Explanation

The head angle of the MY14 Carbon Operator line is 64 degrees when the Rock Shox Boxxer is in its lowest position.

3. What disc brake standard is featured on the MY14 Carbon Operator line?

IS

Post mount 140

Post mount 160

Post mount 180

The disc brake standard featured on the MY14 Carbon Operator line is IS.

Explanation

The disc brake standard featured on the MY14 Carbon Operator line is IS.

4. What ISCG standard do the MY14 DH bikes feature?

ISCG 03

ISCG 05/03

ISCG 05

They do not have ISCG tabs

The MY14 DH bikes feature the ISCG 05 standard.

Explanation

The MY14 DH bikes feature the ISCG 05 standard.

5. The MY14 Operator features cable routing options for:

Internal rear brake, internal rear Derailleur

Internal or external rear brake, internal rear Derailleur, internal dropper post

Internal or external rear brake, external rear Derailleur

Internal or external rear brake, internal rear Derailleur

The MY14 Operator features cable routing options for both internal and external rear brake cables, as well as an internal rear derailleur cable. This means that the bike can be set up with either internal or external routing for the rear brake, depending on the rider's preference. Additionally, the rear derailleur cable can be routed internally for a cleaner look and improved aerodynamics.

Explanation

The MY14 Operator features cable routing options for both internal and external rear brake cables, as well as an internal rear derailleur cable. This means that the bike can be set up with either internal or external routing for the rear brake, depending on the rider's preference. Additionally, the rear derailleur cable can be routed internally for a cleaner look and improved aerodynamics.

6. The MY14 Operator's leverage rate curve is more progressive at the beginning of the stroke than the MY13 bike, why did KONA do this?

Allows heavy riders to use lighter springs

Keeps the bike higher in the travel

Avoids pedal kickback

Minimizes chain growth

KONA made the MY14 Operator's leverage rate curve more progressive at the beginning of the stroke to keep the bike higher in the travel. This means that the suspension will be more active and responsive in the initial part of the stroke, allowing the bike to maintain a higher position and better absorb bumps and obstacles on the trail. This can improve overall control and stability, especially in rough terrain.

Explanation

KONA made the MY14 Operator's leverage rate curve more progressive at the beginning of the stroke to keep the bike higher in the travel. This means that the suspension will be more active and responsive in the initial part of the stroke, allowing the bike to maintain a higher position and better absorb bumps and obstacles on the trail. This can improve overall control and stability, especially in rough terrain.

7. The MY14 Operator features pinch bolts on the drive and non-driveside to

Keep weight balance between the drive and non driveside of the bike

Increase the complexity of installing rear wheel

Increase the stiffness of the frame

Add another detail to go on, and on about

The MY14 Operator features pinch bolts on the drive and non-driveside to increase the stiffness of the frame. By having pinch bolts on both sides, it allows for a more secure connection between the frame and the rear wheel. This helps to reduce flex and torsion in the frame, resulting in a stiffer and more responsive ride.

Explanation

The MY14 Operator features pinch bolts on the drive and non-driveside to increase the stiffness of the frame. By having pinch bolts on both sides, it allows for a more secure connection between the frame and the rear wheel. This helps to reduce flex and torsion in the frame, resulting in a stiffer and more responsive ride.

8. The MY14 Operator line uses 13mm rotor bolts to mount:

Fork bumpers, Derailleur hanger

Fork bumpers, Derailleur hanger, rear axle pinch bolts

Fork bumpers, Derailleur hanger, rear axle pinch bolts, rear brake cable guides

13mm rotor bolts are not used on this frame.

The correct answer is Fork bumpers, Derailleur hanger, rear axle pinch bolts, rear brake cable guides. This is because the MY14 Operator line uses 13mm rotor bolts to mount all of these components.

Explanation

The correct answer is Fork bumpers, Derailleur hanger, rear axle pinch bolts, rear brake cable guides. This is because the MY14 Operator line uses 13mm rotor bolts to mount all of these components.

9. The MY14 Operator line features which type of KONA suspension:

Swinger

Beamer

Rocker

All of the above

The correct answer is "Beamer." The MY14 Operator line features the Beamer type of KONA suspension.

Explanation

The correct answer is "Beamer." The MY14 Operator line features the Beamer type of KONA suspension.

10. What BB standard does the MY14 Operator line feature?

83mm BB shell

PF BB30 BB shell

PF 104.5 BB shell

73mm English BB shell

The correct answer is PF 104.5 BB shell. The MY14 Operator line features a PF 104.5 BB shell, which is a type of bottom bracket standard used in mountain bikes. This standard allows for a wider bottom bracket shell width of 104.5mm, providing increased stiffness and durability.

Explanation

The correct answer is PF 104.5 BB shell. The MY14 Operator line features a PF 104.5 BB shell, which is a type of bottom bracket standard used in mountain bikes. This standard allows for a wider bottom bracket shell width of 104.5mm, providing increased stiffness and durability.