Are You Familiar With FSG? Find Out With This Quiz!
-
Minimum distance between the rearmost face of the brake pedal and the centre of the circle(percy's representing buttocks) is
-
910mm
-
915mm
-
920mm
-
925mm
-
This quiz tests your knowledge on specific technical standards in automotive engineering, such as dimensions, safety features, and performance metrics in racing contexts. It's designed to assess familiarity with Formula Student Germany (FSG) regulations.
Quiz Preview
- 2.
The minimum radius of bend neasured at the tube centreline having 30mm as OD is
-
60
-
75
-
80
-
90
Correct Answer
A. 90Explanation
The minimum radius of bend for a tube is determined by its outer diameter (OD). The tube must be bent in a way that does not cause it to buckle or deform. In this case, the OD of the tube is 30mm, so the minimum radius of bend would be larger than 30mm to prevent any deformation. Among the given options, the only value larger than 30mm is 90, so the correct answer is 90.Rate this question:
-
- 3.
Minimum dia. Of wheel must be
-
203.25mm
-
203.2
-
203.4
-
203.3
Correct Answer
A. 203.2Explanation
The correct answer is 203.2. This is because the minimum diameter of the wheel must be 203.2mm.Rate this question:
-
- 4.
OD of jacking tube is
-
24-28mm
-
25-28mm
-
24-29
-
25-29
Correct Answer
A. 25-29Explanation
The correct answer is 25-29 because it falls within the given range of 24-29mm. This means that the outer diameter (OD) of the jacking tube can be anywhere between 25mm and 29mm.Rate this question:
-
- 5.
In order to have a protest considered, a team must post a _____ point bond which will be forfeited if their protest is rejected
-
25
-
50
-
75
-
20
Correct Answer
A. 25Explanation
To have a protest considered, a team must post a bond of 25 points. This bond will be forfeited if their protest is rejected.Rate this question:
-
- 6.
Min. dia of hairpin turns in the endurance event is
-
900cm
-
300cm
-
500cm
-
700cm
Correct Answer
A. 900cmExplanation
The minimum diameter of hairpin turns in the endurance event is 900cm. This means that the turns in the event cannot have a diameter smaller than 900cm. A hairpin turn is a very tight turn that requires the driver to make a sharp change in direction. A larger diameter allows for a smoother turn and gives the driver more space to maneuver the vehicle. Therefore, a minimum diameter of 900cm ensures safety and allows for better control during the hairpin turns in the endurance event.Rate this question:
-
- 7.
DIA. An impactor is
-
200mm
-
254mm
-
250mm
-
258mm
Correct Answer
A. 254mmExplanation
The correct answer is 254mm because it is the only option that matches the given measurement of "DIA" or diameter. The other options do not match the given measurement and therefore cannot be the correct answer.Rate this question:
-
- 8.
Which car has a lesser time achieved and by how much in a skid pad event: A - 19.69 seconds hitting 5 cones or B - 18.76 seconds hitting 7 cones
-
B by .33 s
-
A by .43 s
-
B by .43s
-
A by .33 s
Correct Answer
A. B by .43sExplanation
In the skid pad event, Car B achieved a lesser time of 18.76 seconds compared to Car A's time of 19.69 seconds. The time difference between the two cars is 0.93 seconds. Therefore, Car B achieved a lesser time by 0.43 seconds.Rate this question:
-
- 9.
Fasteners attaching scatter shields and guards must be a minimum of (SAE grade 5)
-
6.45
-
6.35
-
6.25
-
6.2
Correct Answer
A. 6.35Explanation
The correct answer is 6.35. Fasteners attaching scatter shields and guards must be a minimum of SAE grade 5. This means that the fasteners must meet the specifications and strength requirements of SAE grade 5 in order to securely attach the scatter shields and guards.Rate this question:
-
- 10.
Format to submit cost report (electronic copy) is
-
VIT UNIVERSITY_054_FSAE_FSG_CR.XLS
-
054_VIT UNIVERSITY_FSG.XLS
-
054_VIT UNIVERSITY_FSG_CR.XLS
-
VIT UNIVERSITY_054_FSAE_CR.XLS
Correct Answer
A. 054_VIT UNIVERSITY_FSG.XLSExplanation
The correct answer is "054_VIT UNIVERSITY_FSG.XLS" because it follows the format specified in the question. The format requires the code "054" to be placed at the beginning, followed by the university name "VIT UNIVERSITY" and the type of report "FSG". The file extension ".XLS" indicates that it is an electronic copy of the report.Rate this question:
-
Quiz Review Timeline (Updated): Mar 21, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Jan 12, 2014Quiz Created by
Prvmarketing2014
Back to top