Scrutineering Quiz Practice 1
- 1.
How many sets of tires and wheels needs to be included in the cost report?
- A.
One for every type of tires the car is going to use (i.e., dry and rain tires)
- B.
Only one, dry ones
- C.
Only one, rain ones
- D.
It has not to be included
Correct Answer
B. Only one, dry onesExplanation
The cost report should only include one set of tires and wheels, specifically the dry ones. This means that the cost of rain tires and wheels does not need to be included in the report.Rate this question:
-
- 2.
Which of those minimal required material requirements of the side impact structure is incorrect: (OUTSIDE DIMENSION X WALL THICKNESS)
- A.
Round 25.0 mm x 1.75 mm
- B.
Round 25.4 mm x 1.60 mm
- C.
Round 1.0 inch x 0.05 inch
Correct Answer
C. Round 1.0 inch x 0.05 inchExplanation
The given answer, "Round 1.0 inch x 0.05 inch," is incorrect because it does not meet the minimal required material requirements for the side impact structure. The outside dimension of 1.0 inch is acceptable, but the wall thickness of 0.05 inch does not meet the required thickness for the structure.Rate this question:
-
- 3.
Are “Brake-by-wire” systems okay to use?
- A.
Yes, you are allowed to use “Brake-by-wire”
- B.
No,“Brake-by-wire” systems are prohibited
Correct Answer
B. No,“Brake-by-wire” systems are prohibitedExplanation
"Brake-by-wire" systems are prohibited means that these systems are not allowed to be used. This implies that there are certain restrictions or regulations in place that prevent the use of such systems. The answer suggests that it is not acceptable or safe to use "Brake-by-wire" systems, possibly due to concerns about their reliability or potential risks associated with their operation.Rate this question:
-
- 4.
What is the maximum engine displacement at the competition?
- A.
650 cc
- B.
Any displacement is allowed
- C.
610 cc
Correct Answer
C. 610 ccExplanation
The correct answer is 610 cc. This means that at the competition, the maximum engine displacement allowed is 610 cc.Rate this question:
-
- 5.
Which of the following modifications is not specifically permitted without voiding Inspection Approval once vehicle is approved to compete in the dynamic events
- A.
Substitution of the head restraint or seat insert for different drivers
- B.
Replenishment of fluids
- C.
Adjustments of mirrors
- D.
Replacement of worn tires or brake pads
- E.
Adjustment of brake bias
- F.
Replacement of worn chains or sprockets
Correct Answer
F. Replacement of worn chains or sprocketsExplanation
The replacement of worn chains or sprockets is not specifically permitted without voiding Inspection Approval once the vehicle is approved to compete in the dynamic events. This means that if the chains or sprockets are worn and need to be replaced, it would require a new inspection approval before the vehicle can continue to compete in the dynamic events.Rate this question:
-
- 6.
What is the minimum distance between the Main hoop tubes where the Main hoop connects to the major structure of the frame?
- A.
355 mm
- B.
380 mm
- C.
400 mm
- D.
450 mm
Correct Answer
B. 380 mmExplanation
The minimum distance between the Main hoop tubes where the Main hoop connects to the major structure of the frame is 380 mm.Rate this question:
-
- 7.
Which of the following dimensions is not used for the 95th Percentile Male Template?
- A.
A straight line measuring 370mm (14.57 in)
- B.
A circle of diameter 200mm (7.87 in)
- C.
A straight line measuring 490mm (19.29 in)
- D.
A straight line measuring 280mm (11.02 in)
- E.
A circle of diameter 300mm (11.81 in)
Correct Answer
A. A straight line measuring 370mm (14.57 in)Explanation
The correct answer is "A straight line measuring 370mm (14.57 in)" because the 95th Percentile Male Template does not use this dimension. The other options include a circle of diameter 200mm, a straight line measuring 490mm, a straight line measuring 280mm, and a circle of diameter 300mm, which are all dimensions that could potentially be used in the template.Rate this question:
-
- 8.
Which document has to be sent in prior to the FSG competition?
- A.
Business Logic Case
- B.
Executive Summary
- C.
Team photo
Correct Answer
B. Executive SummaryExplanation
The executive summary is a concise overview of a business plan or proposal that highlights the key points and provides a summary of the document. In the context of the FSG competition, it is likely that participants are required to submit an executive summary of their business logic case or proposal prior to the competition. This summary allows the organizers to quickly understand the main objectives, strategies, and potential of each participant's project. The team photo is not directly related to the document submission process and is therefore not the correct answer.Rate this question:
-
- 9.
Which of the following items is not specifically required to be brought to technical inspection
- A.
Fire extinguishers
- B.
Technical Inspection Form
- C.
Dry and wet tires
- D.
Driver´s Equipment
- E.
Structural Equivalency Sheet
- F.
Quickjack
- G.
Vehicle
- H.
Push bar
- I.
Copies of any rules questions you submitted with the answer you received
- J.
A copy of the FSAE rules book
- K.
Impact Attenuator Report copies
Correct Answer
J. A copy of the FSAE rules bookExplanation
The question asks for an item that is not specifically required to be brought to technical inspection. The correct answer is "A copy of the FSAE rules book." This means that bringing a copy of the FSAE rules book is not a specific requirement for technical inspection.Rate this question:
-
- 10.
The actuation of the throttle is not allowed via
- A.
Cable system
- B.
Rod system
- C.
Throttle by wire
Correct Answer
C. Throttle by wireExplanation
Throttle by wire is the correct answer because it refers to a system where the actuation of the throttle is not done via a cable or rod system. Instead, it uses electronic sensors and actuators to control the throttle opening. This allows for more precise and efficient control of the throttle, as well as enabling features like electronic throttle control and cruise control.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 19, 2023Quiz Edited by
ProProfs Editorial Team -
Apr 06, 2014Quiz Created by
Idaherbertsson
Back to top