CDC Z3D153 : Air Force Training Test! Trivia Quiz

1. Which of the following is not a requirement for upgrade to 3D153?

Obtaining flight chief approval for the award of Air Force Specialty Code (AFSC) 3D153.

Completing Cyberspace Support career development course (CDC) 3DX5X.

Completing Radio Frequency (RF) Transmission Systems CDC 3D153

Completing all core tasks identified for 5 skill-level.

The correct answer is "Obtaining flight chief approval for the award of Air Force Specialty Code (AFSC) 3D153." This is not a requirement for upgrade to 3D153. The other options, completing the Cyberspace Support career development course (CDC) 3DX5X, completing the Radio Frequency (RF) Transmission Systems CDC 3D153, and completing all core tasks identified for the 5 skill-level, are all requirements for the upgrade.

Explanation

The correct answer is "Obtaining flight chief approval for the award of Air Force Specialty Code (AFSC) 3D153." This is not a requirement for upgrade to 3D153. The other options, completing the Cyberspace Support career development course (CDC) 3DX5X, completing the Radio Frequency (RF) Transmission Systems CDC 3D153, and completing all core tasks identified for the 5 skill-level, are all requirements for the upgrade.

2. What outlines mandatory training items that supervisors use to prepare job safety training guides (JSTG)?

Air Force Safety Outline (AFSO).

Air Force Safety Instruction (AFSI).

Job safety training outline (JSTO).

Job safety training instruction (JSTI).

The correct answer is "Job safety training outline (JSTO)". This answer is supported by the question which asks for the document that outlines mandatory training items for supervisors to use in preparing job safety training guides. The other options, Air Force Safety Outline (AFSO), Air Force Safety Instruction (AFSI), and Job safety training instruction (JSTI), do not specifically mention the creation of training guides or outlines. Therefore, the most appropriate answer is Job safety training outline (JSTO).

Explanation

The correct answer is "Job safety training outline (JSTO)". This answer is supported by the question which asks for the document that outlines mandatory training items for supervisors to use in preparing job safety training guides. The other options, Air Force Safety Outline (AFSO), Air Force Safety Instruction (AFSI), and Job safety training instruction (JSTI), do not specifically mention the creation of training guides or outlines. Therefore, the most appropriate answer is Job safety training outline (JSTO).

3. Which 3D career field installs, supports, and maintains servers or other computer systems?

Knowledge Operations Management (3D0X1).

Cyber Systems Operations (3D0X2).

Spectrum Operations (3D1X2)

Cyber Surety (3D0X3)

The correct answer is Cyber Systems Operations (3D0X2) because this career field involves the installation, support, and maintenance of servers or other computer systems. This job requires knowledge and skills in managing and operating computer systems, networks, and software. The other career fields listed, Knowledge Operations Management (3D0X1), Spectrum Operations (3D1X2), and Cyber Surety (3D0X3), do not specifically focus on server installation, support, and maintenance.

Explanation

The correct answer is Cyber Systems Operations (3D0X2) because this career field involves the installation, support, and maintenance of servers or other computer systems. This job requires knowledge and skills in managing and operating computer systems, networks, and software. The other career fields listed, Knowledge Operations Management (3D0X1), Spectrum Operations (3D1X2), and Cyber Surety (3D0X3), do not specifically focus on server installation, support, and maintenance.

4. Which of the following is not a function of the sections within the career field training plan (CFETP) part I?

Indicates resource constraints

Identifies the specialty training standard (STS).

Explains the purpose of the CFETP and how it is to be used.

Identifies duties and responsibilities, skill and career progression, and career field path.

The correct answer is "Identifies the specialty training standard (STS)." The other options all describe functions of the sections within the career field training plan (CFETP) part I. They indicate resource constraints, explain the purpose of the CFETP and how it is to be used, and identify duties and responsibilities, skill and career progression, and career field path. However, identifying the specialty training standard (STS) is not one of the functions of the sections within the CFETP part I.

Explanation

The correct answer is "Identifies the specialty training standard (STS)." The other options all describe functions of the sections within the career field training plan (CFETP) part I. They indicate resource constraints, explain the purpose of the CFETP and how it is to be used, and identify duties and responsibilities, skill and career progression, and career field path. However, identifying the specialty training standard (STS) is not one of the functions of the sections within the CFETP part I.

5. Which hazard is caused by heavy workloads, lack of control over the pace of work, shift work, noise, working by yourself, and conflict with coworkers and employers?

Biological

Chemical.

Physical.

Stress.

The hazards mentioned in the question, such as heavy workloads, lack of control over the pace of work, shift work, noise, working by yourself, and conflict with coworkers and employers, are all factors that can contribute to stress in the workplace. Stress is a psychological and physiological response to these types of pressures and demands, and it can have negative effects on an individual's mental and physical health. Therefore, stress is the correct answer in this case.

Explanation

The hazards mentioned in the question, such as heavy workloads, lack of control over the pace of work, shift work, noise, working by yourself, and conflict with coworkers and employers, are all factors that can contribute to stress in the workplace. Stress is a psychological and physiological response to these types of pressures and demands, and it can have negative effects on an individual's mental and physical health. Therefore, stress is the correct answer in this case.

6. The minimum milliamperes (mA) of current that result in cardiac arrest and can cause death is?

25mA

50mA

75mA

100mA

A current of 50mA is considered the minimum milliamperes that can result in cardiac arrest and cause death. This level of current can disrupt the normal electrical activity of the heart, leading to a potentially fatal arrhythmia. It is important to note that even lower currents can be dangerous, as individual factors such as overall health and duration of exposure can influence the severity of the effects.

Explanation

A current of 50mA is considered the minimum milliamperes that can result in cardiac arrest and cause death. This level of current can disrupt the normal electrical activity of the heart, leading to a potentially fatal arrhythmia. It is important to note that even lower currents can be dangerous, as individual factors such as overall health and duration of exposure can influence the severity of the effects.

7. Which 3D career field deploys, sustains, troubleshoots and repairs voice, data and video network infrastructure systems, Internet protocol (IP) detection systems and cryptographic equipment?

Radio Frequency Transmission Systems (3D1X3).

Cyber Transport Systems (3D1X2).

Spectrum Operations (3D1X4).

Client Systems (3D1X1).

Cyber Transport Systems (3D1X2) is the correct answer because this 3D career field is responsible for deploying, sustaining, troubleshooting, and repairing voice, data, and video network infrastructure systems, Internet protocol (IP) detection systems, and cryptographic equipment. This field focuses on managing and maintaining the network infrastructure and ensuring its smooth operation.

Explanation

Cyber Transport Systems (3D1X2) is the correct answer because this 3D career field is responsible for deploying, sustaining, troubleshooting, and repairing voice, data, and video network infrastructure systems, Internet protocol (IP) detection systems, and cryptographic equipment. This field focuses on managing and maintaining the network infrastructure and ensuring its smooth operation.

8. Which AF Form is used to report hazardous conditions that place Air Force personnel or property at risk?

1118.

457.

55.

3.

AF Form 457 is used to report hazardous conditions that place Air Force personnel or property at risk. This form allows individuals to document and report any unsafe conditions they encounter, ensuring that appropriate action can be taken to mitigate the risk and maintain the safety of personnel and property. By using AF Form 457, the Air Force can effectively identify and address potential hazards, preventing accidents and injuries.

Explanation

AF Form 457 is used to report hazardous conditions that place Air Force personnel or property at risk. This form allows individuals to document and report any unsafe conditions they encounter, ensuring that appropriate action can be taken to mitigate the risk and maintain the safety of personnel and property. By using AF Form 457, the Air Force can effectively identify and address potential hazards, preventing accidents and injuries.

9. Which Air Force program provides a means of reporting hazards that involve flight, ground, weapons, or space safety?

Ground safety program.

Hazard reporting program.

Hazard communication program.

Ground safety mishap prevention program.

The correct answer is the Hazard reporting program. This program provides a means for reporting hazards that involve flight, ground, weapons, or space safety. It allows individuals to report any potential hazards or safety concerns they observe, ensuring that appropriate actions can be taken to mitigate risks and prevent accidents or mishaps.

Explanation

The correct answer is the Hazard reporting program. This program provides a means for reporting hazards that involve flight, ground, weapons, or space safety. It allows individuals to report any potential hazards or safety concerns they observe, ensuring that appropriate actions can be taken to mitigate risks and prevent accidents or mishaps.

10. To prevent manual handling hazards, utilize team lifting when lifting items that weigh more than how many pounds?

25

50

75

100

To prevent manual handling hazards, team lifting should be used when lifting items that weigh more than 25 pounds. This means that when an object weighs more than 25 pounds, it is recommended to have multiple people lift it together to distribute the weight and reduce the risk of injury or strain on a single individual.

Explanation

To prevent manual handling hazards, team lifting should be used when lifting items that weigh more than 25 pounds. This means that when an object weighs more than 25 pounds, it is recommended to have multiple people lift it together to distribute the weight and reduce the risk of injury or strain on a single individual.

11. Within how many hours must a medical exam be conducted if non-ionizing radiation overexposure occurs?

24

48

72

96

If non-ionizing radiation overexposure occurs, a medical exam must be conducted within 72 hours. This is important because timely medical attention can help assess the extent of the overexposure and determine any potential health risks or necessary treatments. Waiting longer than 72 hours may delay the identification and management of any health issues that could arise from the overexposure.

Explanation

If non-ionizing radiation overexposure occurs, a medical exam must be conducted within 72 hours. This is important because timely medical attention can help assess the extent of the overexposure and determine any potential health risks or necessary treatments. Waiting longer than 72 hours may delay the identification and management of any health issues that could arise from the overexposure.