Windows 8 Quiz (32q)
-
Windows 8 has a start screen
-
True
-
False
-
This Windows 8 quiz assesses knowledge on key features such as tile management, Windows To Go, PowerShell cmdlets, Hyper-V, and DHCP protocols. It's designed for learners aiming to master Windows 8 administration, enhancing both academic and professional skills in IT.
Quiz Preview
- 2.
The minimum requirment for running hyper-v on windows 8 is 4 Gb of ram
-
True
-
False
Correct Answer
A. TrueExplanation
The minimum requirement for running Hyper-V on Windows 8 is 4 GB of RAM. This means that in order to successfully run Hyper-V on a Windows 8 system, the computer must have at least 4 GB of RAM installed. Without meeting this requirement, the system may not have enough memory to effectively run virtual machines and other resources associated with Hyper-V. Therefore, the given answer "True" is correct.Rate this question:
-
- 3.
Powershell commands are called cmdlets
-
True
-
False
Correct Answer
A. TrueExplanation
Powershell commands are referred to as cmdlets because they are designed to perform specific tasks and provide a consistent and standardized way of interacting with the PowerShell environment. Cmdlets are self-contained, reusable components that can be combined to create complex scripts and automate various administrative tasks. They follow a verb-noun naming convention and are designed to be easy to use and understand. Therefore, the given statement that Powershell commands are called cmdlets is true.Rate this question:
-
- 4.
What is rdp?
-
Remote device protection
-
Remote desktop protocol
-
Resume decoding protocol
-
Restart device packet
Correct Answer
A. Remote desktop protocolExplanation
RDP stands for Remote Desktop Protocol. It is a technology developed by Microsoft that allows users to access and control a computer remotely over a network. With RDP, users can connect to a remote computer and interact with it as if they were sitting in front of it. This protocol is commonly used for remote administration, remote support, and accessing virtual desktops.Rate this question:
-
- 5.
What is suspend mode?
-
A task manager option
-
Shutdown option
-
A feature that`s related to power option
-
Non of the above
Correct Answer
A. A feature that`s related to power optionExplanation
Suspend mode is a feature that is related to power options. It allows a computer or device to enter a low-power state while still saving the current state of the system. In this mode, the computer's operations are temporarily paused, and it consumes very little power. It is often used to conserve battery life on laptops or to quickly resume operations on desktop computers.Rate this question:
-
- 6.
On network location awareness, what are the setting options?
-
Work group, domain group
-
Dhcp, apipa, static
-
Home network, work network, public network
-
Home network, work network
Correct Answer
A. Home network, work network, public networkExplanation
The setting options for network location awareness include home network, work network, and public network. These options allow users to define the type of network they are connected to, which helps in determining the appropriate security settings and network sharing permissions. The home network option is suitable for trusted networks like a home or small office network, the work network option is for larger corporate networks, and the public network option is for untrusted networks like public Wi-Fi hotspots.Rate this question:
-
- 7.
Refresh your pc function will install windows 8
-
True
-
False
Correct Answer
A. FalseExplanation
The statement is incorrect. The "Refresh your PC" function in Windows 8 does not install Windows 8. Instead, it allows the user to restore their PC to its original state, removing any installed apps and settings while keeping personal files intact.Rate this question:
-
- 8.
How meny versions of windows 8 are for pc?
-
6
-
2
-
3
-
5
Correct Answer
A. 3Explanation
There are three versions of Windows 8 available for PC.Rate this question:
-
- 9.
What releases of windows 8 for pc are available?
-
Windows 8 ; windows 8.1
-
Windows rt ; windows 8.2
-
Windows 8 ; windows 8.1 ; windows update
-
Windows 8 ; windows 2008
Correct Answer
A. Windows 8 ; windows 8.1 ; windows updateExplanation
The correct answer is windows 8, windows 8.1, and windows update. This is because Windows 8 and Windows 8.1 are different versions of the operating system released by Microsoft for PCs. Windows update refers to the regular updates and patches released by Microsoft to improve the functionality and security of the Windows operating system.Rate this question:
-
- 10.
I have set an inbound rule for a port on firewall to block a connection. what will happen to traffic flow ?
-
I allow recieving traffic to my computer from the port configured
-
I dis-allow programs from being installed
-
I dis-allow recieving traffic to my computer from the port configured
-
Nothing happens
Correct Answer
A. I dis-allow recieving traffic to my computer from the port configuredExplanation
If you have set an inbound rule on the firewall to block a connection, the traffic flow will be affected by disallowing receiving traffic to your computer from the port configured. This means that any incoming traffic attempting to connect to your computer through the specified port will be blocked and not allowed to reach your computer.Rate this question:
-
- 11.
Is there a view that is similar to the Windows 7 desktop in Windows 8?
-
True
-
False
Correct Answer
A. TrueExplanation
There is a view in Windows 8 that is similar to the Windows 7 desktop.Rate this question:
-
- 12.
How do you open a search windows from metro screen?
-
Click on the search tile
-
Windows key + F
-
Windows key + S
-
Type the word search
Correct Answer
A. Windows key + SExplanation
To open a search window from the metro screen, you can use the shortcut "Windows key + S". This combination of keys will bring up the search function directly, allowing you to quickly search for files, apps, or settings without having to navigate through menus or tiles. It is a convenient and efficient way to access the search feature in Windows.Rate this question:
-
- 13.
How do you zoom in and out on an Internet Explorer window and in the metro window? Select the two that apply
-
Ctrl +
-
Scroll forward
-
Ctrl -
-
Scroll backward
Correct Answer(s)
A. Ctrl +
A. Ctrl -Explanation
To zoom in and out on an Internet Explorer window, you can use the keyboard shortcut "ctrl +" to zoom in and "ctrl -" to zoom out. This allows you to adjust the size of the content displayed on the screen. The scroll wheel on the mouse can also be used to zoom in and out by scrolling forward to zoom in and scrolling backward to zoom out. These methods apply to both the regular Internet Explorer window and the metro window.Rate this question:
-
- 14.
Windows key + D switches between the desktop view and the Metro view
-
True
-
False
Correct Answer
A. FalseExplanation
The correct answer is False. Pressing the Windows key + D in Windows operating system minimizes all open windows and displays the desktop. It does not switch between the desktop view and the Metro view.Rate this question:
-
- 15.
To move a tile you:
-
Press and hold the tile than drag it to desktop
-
Click and drag it anywhere you want
-
Resize it, rename it, than it will allow you to move it
-
You cannot move tiles
Correct Answer
A. Click and drag it anywhere you wantExplanation
To move a tile, you can click on it and then drag it to the desired location on the desktop. This action allows you to rearrange the tiles according to your preference and organize them in a way that suits your needs.Rate this question:
-
- 16.
The minimum requirment for windows 8 64 bit version installation is 1 Gb of ram memory
-
True
-
False
Correct Answer
A. FalseExplanation
The minimum requirement for Windows 8 64-bit version installation is not 1 GB of RAM memory. The correct minimum requirement for Windows 8 64-bit version installation is 2 GB of RAM memory.Rate this question:
-
- 17.
Windows 8 uses the same karnel version as windows 7
-
True
-
False
Correct Answer
A. FalseExplanation
Windows 8 does not use the same kernel version as Windows 7. Windows 8 introduced a new kernel called Windows NT 6.2, while Windows 7 used the Windows NT 6.1 kernel. Therefore, the statement is false.Rate this question:
-
- 18.
Whats is the file explorer ribbon?
-
The area at the top of File Explorer that groups common tasks on related tabs
-
Internet explorer 11 security function
-
A collection of items, such as files and folders, assembled from various locations
-
Non of the above
Correct Answer
A. The area at the top of File Explorer that groups common tasks on related tabsExplanation
The file explorer ribbon refers to the area at the top of File Explorer that groups common tasks on related tabs. It is a user interface element that provides easy access to various functions and options for managing files and folders. The ribbon organizes these tasks into different tabs, making it convenient for users to navigate and perform actions within the File Explorer.Rate this question:
-
- 19.
Whats the different between windows to go feature and a typical install?
-
No network connection on wtg
-
A use of a external drive for booting on wtg
-
Windows recovery isn't available on typical installation
-
Internal disks are online on wtg
Correct Answer
A. A use of a external drive for booting on wtgExplanation
The main difference between the Windows To Go feature and a typical installation is that Windows To Go requires the use of an external drive for booting. This means that you can carry your entire Windows system on a portable USB drive and use it on any compatible computer without needing to install it on the internal hard drive. In contrast, a typical installation requires the operating system to be installed directly on the computer's internal hard drive.Rate this question:
-
- 20.
When you log on for the first time to windows 8 what users are active?
-
Guest
-
Administrator
-
User you have signed in when installing
-
B and c are correct
Correct Answer
A. User you have signed in when installingExplanation
When you log on for the first time to Windows 8, the only active user is the user account that you created and signed in with during the installation process. This user account is typically set up as an administrator account, giving you full control over the system. The Guest account is not active by default and needs to be enabled manually if desired. Therefore, the correct answer is "User you have signed in when installing."Rate this question:
-
- 21.
What type of virtual switch network adaptor on hyper-v manager will allow connection to the internet?
-
Internal
-
Lan
-
Private
-
External
Correct Answer
A. ExternalExplanation
The external virtual switch network adaptor on Hyper-V Manager allows connection to the internet. This type of adaptor enables communication between the virtual machines and the external network, such as the internet or an external LAN. It allows the virtual machines to access the internet just like any other physical device connected to the network.Rate this question:
-
- 22.
What option has been added on task manager?
-
Performance
-
Events
-
Search
-
Startup
Correct Answer
A. StartupExplanation
The option that has been added to Task Manager is "startup". This option allows users to manage the programs and applications that automatically start when their computer boots up. By accessing the startup tab in Task Manager, users can enable or disable specific programs, which can help improve the computer's startup time and overall performance.Rate this question:
-
- 23.
When obtaining ip from dhcp fails - what protocol is used as default ?
-
Ipv6
-
Ipconfig
-
Rdp
-
Apipa
Correct Answer
A. ApipaExplanation
When obtaining an IP from DHCP fails, the default protocol used is Apipa. Apipa stands for Automatic Private IP Addressing and is a feature in Windows operating systems. It allows a device to assign itself a private IP address when it cannot obtain an IP address from a DHCP server. This allows the device to still have network connectivity within a local network, even without a DHCP server.Rate this question:
-
- 24.
What are the 4 steps of requiring a ip address from dhcp?
-
Ask, approve, locate, ack
-
Demand, obtain, require, add
-
Discover, offer, request, acknowledge
-
Discover, offer, release, acknowledge
Correct Answer
A. Discover, offer, request, acknowledgeExplanation
The correct answer is "Discover, offer, request, acknowledge." When a device connects to a network and needs an IP address from a DHCP server, it first sends a discover message to find available DHCP servers on the network. The DHCP servers then respond with an offer message, providing an IP address that can be assigned to the device. The device then sends a request message, indicating its acceptance of the offered IP address. Finally, the DHCP server acknowledges the request and assigns the IP address to the device, completing the process.Rate this question:
-
- 25.
We would use____ to manage boot load entries on windows 8
Correct Answer
bcdeditExplanation
bcdedit is a command-line tool that allows users to view and modify the boot configuration data (BCD) store in Windows 8. It is used to manage boot load entries, such as adding or removing operating systems from the boot menu, setting default boot options, and troubleshooting boot-related issues. Bcdedit provides a comprehensive set of options and parameters to configure the boot process and ensure the system starts up correctly.Rate this question:
- 26.
In bitlocker feature, what is essential for encrypting a drive?
-
Uefi
-
Windows to go
-
Tpm chip
-
Chipset
Correct Answer
A. Tpm chipExplanation
The TPM chip is essential for encrypting a drive in the BitLocker feature. The TPM (Trusted Platform Module) is a hardware component that provides secure storage for encryption keys and performs cryptographic operations. It ensures the integrity of the system and protects against unauthorized access. By utilizing the TPM chip, BitLocker can securely encrypt the drive and protect the data stored on it.Rate this question:
-
- 27.
Where do you go to set windows 8.1 to boot straightly to desktop?
-
Conrtrol panel
-
Devices
-
Right click task bar, propeties, task bar and navigation
-
Bios
Correct Answer
A. Right click task bar, propeties, task bar and navigationExplanation
To set Windows 8.1 to boot directly to the desktop, you need to right-click on the taskbar and select "Properties." In the Taskbar and Navigation properties window, navigate to the "Navigation" tab. Under the "Start screen" section, check the box that says "Go to the desktop instead of Start when I sign in." This will ensure that Windows 8.1 bypasses the Start screen and takes you straight to the desktop upon booting up.Rate this question:
-
- 28.
Hyper v is a hypervisor of what type?
-
Type 1
-
Type 2
-
Type 1 and 2
-
No type
Correct Answer
A. Type 1Explanation
Hyper-V is a type 1 hypervisor. Type 1 hypervisors, also known as bare-metal hypervisors, run directly on the host's hardware without the need for an underlying operating system. Hyper-V is installed directly on the server hardware and manages the virtual machines and resources directly. This allows for better performance and efficiency compared to type 2 hypervisors, which run on top of an operating system.Rate this question:
-
- 29.
On what feature can we use snap-ins to load a list of administrative tools?
-
Search - devics
-
Mmc
-
Services
-
Control panel
Correct Answer
A. MmcExplanation
Snap-ins are used in Microsoft Management Console (MMC) to load various administrative tools. MMC is a framework that provides a common interface for managing and configuring system components on Windows operating systems. By using MMC, administrators can create customized consoles with snap-ins for specific tasks or roles. Therefore, the correct answer is "mmc" as it is the platform where snap-ins can be used to load a list of administrative tools.Rate this question:
-
- 30.
What can i use powershell for? choose one
-
Configuring hyper-v
-
Use it like cmd but less options
-
Use it like cmd but much more options
-
Build scripts
-
A,c, and d are correct
Correct Answer
A. A,c, and d are correctExplanation
PowerShell can be used for configuring Hyper-V, as it provides cmdlets specifically designed for managing virtual machines and their settings. It can also be used as a replacement for the traditional command prompt (cmd), offering similar functionality but with more options available. Additionally, PowerShell is commonly used for building scripts, allowing users to automate tasks and perform complex operations efficiently. Therefore, options A, C, and D are all correct in terms of the various uses of PowerShell.Rate this question:
-
- 31.
What pre-requirment must be present for refresh feature on windows 8?
-
A valid license
-
Usb drive
-
A iso installment
-
Pressing f5 on keyboard
Correct Answer
A. A iso installmentExplanation
To use the refresh feature on Windows 8, a valid ISO installment is required. This means that the user needs to have a Windows 8 installation file in ISO format. The refresh feature allows the user to restore their computer to its original state while keeping personal files and settings intact. Without a valid ISO installment, the refresh feature cannot be utilized.Rate this question:
-
- 32.
On windows 8 metro screen, how do you set up advanced options for a monitor?
-
Settings
-
Screens
-
Explorer ribon
-
Devices
Correct Answer
A. DevicesExplanation
To set up advanced options for a monitor on the Windows 8 Metro screen, you need to go to the "devices" section. This is where you can manage and configure various devices connected to your computer, including monitors. By selecting the "devices" option, you will be able to access the advanced settings for your monitor and make any necessary adjustments or configurations.Rate this question:
-
Quiz Review Timeline (Updated): Mar 22, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 22, 2023Quiz Edited by
ProProfs Editorial Team -
Jul 20, 2015Quiz Created by
Yonatanqit
Back to top