Customer Centricity Celebrations -2018 - Day-5

Reviewed by Editorial Team
The ProProfs editorial team is comprised of experienced subject matter experts. They've collectively created over 10,000 quizzes and lessons, serving over 100 million users. Our team includes in-house content moderators and subject matter experts, as well as a global network of rigorously trained contributors. All adhere to our comprehensive editorial guidelines, ensuring the delivery of high-quality content.
Learn about Our Editorial Process
| By Ganesh
G
Ganesh
Community Contributor
Quizzes Created: 4 | Total Attempts: 758
| Attempts: 175
SettingsSettings
Please wait...
  • 1/10 Questions

    What is the other name of DOWNL PM ?

    • Methoxy propyl acetate 
    • Methoxy propyl ester
    • 1-Methoxy 2-propanol
    • Ethyl acetate
Please wait...
About This Quiz

This quiz from the Customer Centricity Celebrations 2018, Day-5, assesses knowledge on chemical processes and quality control in manufacturing, focusing on specific materials like emulsions, resins, and catalysts used in advanced product development.

Customer Centricity Celebrations -2018 - Day-5 - Quiz

Quiz Preview

  • 2. 

    Which type of resin goes in advanced products ?

    • R-3486

    • R -2361

    • R-3437

    • R-3508

    Correct Answer
    A. R-3486
    Explanation
    R-3486 is the type of resin that goes in advanced products.

    Rate this question:

  • 3. 

    Name the catalyst used in resin preparation  from the below ?

    • Phthalic anhydride 

    • Lithium sterate 

    • Malic anhydride 

    • Distilled Soya fatty acid 

    Correct Answer
    A. Lithium sterate 
    Explanation
    Lithium stearate is the catalyst used in resin preparation.

    Rate this question:

  • 4. 

    What is pre emulsion ?

    • Mixture of monomers 

    • Mixture of monomers, surfactants & water

    • Mixture of Monomer and water

    • Mixture of acids and monomers 

    Correct Answer
    A. Mixture of monomers, surfactants & water
    Explanation
    Pre-emulsion is a mixture of monomers, surfactants, and water. Monomers are small molecules that can polymerize to form larger molecules, and they are the building blocks of polymers. Surfactants are compounds that lower the surface tension between two liquids or between a liquid and a solid, allowing them to mix more easily. Water is used as a solvent in the pre-emulsion to dissolve the monomers and surfactants and create a stable mixture. This pre-emulsion can then be used as a starting material for various polymerization processes to produce polymers with desired properties.

    Rate this question:

  • 5. 

    How many emulsion reactors and PETs do we have in our plant ?

    • 3 Reactors & 4 Pets 

    • 2 Reactors  & P pets 

    • 4 Reactors & 2 Pets 

    • 2 Reactors & 4 Pets 

    Correct Answer
    A. 2 Reactors & 4 Pets 
    Explanation
    The correct answer is 2 Reactors & 4 Pets. This means that there are 2 emulsion reactors and 4 PETs in the plant.

    Rate this question:

  • 6. 

    AZDN should  not be mixed with ?

    • Butanol

    • PAN

    • O-Xylene

    • Penta 

    Correct Answer
    A. Butanol
    Explanation
    AZDN should not be mixed with butanol because butanol is a highly flammable liquid and can react violently with AZDN, which is a powerful explosive compound. Mixing these two substances can lead to a hazardous situation, including the risk of fire or explosion. Therefore, it is important to handle and store AZDN separately from butanol to ensure safety.

    Rate this question:

  • 7. 

    What is the newly incorporated resin for touch wood ?

    • R-3507

    • R-3508

    • R-3516

    • R-3517

    Correct Answer
    A. R-3517
  • 8. 

    Which emulsion is considered as green emulsion?

    • R-5810

    • R-5686

    • R-5811

    • R-5635

    Correct Answer
    A. R-5686
    Explanation
    The emulsion R-5686 is considered as the green emulsion.

    Rate this question:

  • 9. 

    What is MES ?

    • Manufacturing excellence system 

    • Monitoring execution system 

    • Manufacturing execution system 

    • Monitoring excellence system 

    Correct Answer
    A. Manufacturing execution system 
    Explanation
    MES stands for Manufacturing Execution System. It is a software-based system that helps in managing and controlling the manufacturing operations on the shop floor. It provides real-time data and visibility into the production process, enabling better decision-making and optimization of resources. MES helps in tracking and monitoring the execution of manufacturing operations, including production scheduling, inventory management, quality control, and maintenance. It plays a crucial role in improving productivity, efficiency, and overall operational performance in manufacturing industries.

    Rate this question:

  • 10. 

    Low temperate of reactor  and high flow rate of monomer leads to 

    • Low molecular weight polymer 

    • High molecular weight polymer

    • Thermal resistant polymer

    • Cross link polymer 

    Correct Answer
    A. Low molecular weight polymer 
    Explanation
    The low temperature of the reactor and the high flow rate of monomer result in a fast polymerization process. This leads to shorter polymer chains and a lower molecular weight polymer.

    Rate this question:

Quiz Review Timeline (Updated): Jan 31, 2023 +

Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.

  • Current Version
  • Jan 31, 2023
    Quiz Edited by
    ProProfs Editorial Team
  • Dec 21, 2018
    Quiz Created by
    Ganesh
Back to Top Back to top
Advertisement
×

Wait!
Here's an interesting quiz for you.

We have other quizzes matching your interest.