Elevate: Mainview Product Breakout Quiz
Elevate MainView Breakout Sessions Quiz
Questions and Answers
- 1.
From the MV IMS session: You can debug messages that are sent to Type-1 AOI Exit?
- A.
True
- B.
False
Correct Answer
B. FalseExplanation
In the MV IMS session, you cannot debug messages that are sent to Type-1 AOI Exit. Therefore, the correct answer is False.Rate this question:
-
- 2.
From the MV IMS session: You can start the AOI Debug trace with MVS Modify command?
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The given answer is true because in MV IMS, it is possible to start the AOI (Application Output Interface) Debug trace using the MVS Modify command. This command allows users to modify various aspects of the MV IMS system, including starting and stopping the AOI Debug trace. Therefore, it is correct to say that the AOI Debug trace can be started with the MVS Modify command in MV IMS.Rate this question:
-
- 3.
From the MV IMS session: The STATICOUTSEC parameter can be defined in IMS PROCLIB startup member?
- A.
DFSRRC00
- B.
DFSDCxxx
- C.
DFSDFxxx
- D.
All of the above
- E.
None of the above
Correct Answer
B. DFSDCxxxExplanation
The correct answer is DFSDCxxx. The STATICOUTSEC parameter can be defined in the IMS PROCLIB startup member using the DFSDCxxx member. This parameter is used to specify the security level for static calls made by IMS programs.Rate this question:
-
- 4.
From the MV IMS session: What single piece of new information was added to the IRGOLOPR view, Is it Current DLI function?
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The correct answer is True. This means that the single piece of new information added to the IRGOLOPR view is the Current DLI function.Rate this question:
-
- 5.
From the MV IMS session: The IRGOLOPI view is the interval version of the IRGOLOPR view. Starting in version 5.3, we provided an Alarm Solution Profile based on that view. What condition would the user want to be warned about by using that Alarm Solution Profile?
- A.
Looping
- B.
Memory usage
- C.
I/O
Correct Answer
A. LoopingExplanation
The user would want to be warned about looping by using the Alarm Solution Profile based on the IRGOLOPI view.Rate this question:
-
- 6.
BMC AMI OPS UI Preview Session: What WILL be covered in AMI Ops UI first release?
- A.
A new HTML_5 based user interface for AMI Ops (MainView)
- B.
​​​​​​​Includes all 3270 views, Alarms page & one new dashboard type
- C.
Deployed on mainframe
- D.
Connecting to MainView services will be use standard user/password authentication
- E.
GA planned for January 2021
- F.
Frequent release cycles are planned going forward
- G.
All of the above
- H.
None of the above
Correct Answer
G. All of the aboveExplanation
The correct answer is "All of the above." This means that all the options mentioned in the question will be covered in the first release of the AMI Ops UI. This includes the new HTML_5 based user interface for AMI Ops, which will include all 3270 views, the Alarms page, and one new dashboard type. It will be deployed on the mainframe and will use standard user/password authentication to connect to MainView services. The GA (General Availability) is planned for January 2021, and frequent release cycles are planned for the future.Rate this question:
-
- 7.
BMC AMI OPS UI Preview Session: What WILL be covered AMI Ops UI first release?
- A.
Digital certificate & MFA
- B.
Graphing
- C.
Actions / commands
- D.
Dashboard authorization (view/edit etc.)
- E.
Additional dashboard types
- F.
User preference
- G.
All the above
- H.
None of the above
Correct Answer
G. All the aboveExplanation
The first release of the BMC AMI Ops UI will cover digital certificate and MFA, graphing, actions/commands, dashboard authorization (view/edit etc.), additional dashboard types, and user preference. Therefore, the correct answer is "All the above".Rate this question:
-
- 8.
From the CAzE Session: What is the difference between a dev/test solution and other solutions?
- A.
The cost of a dev/test solution is constant, where the cost of other solutions depends on the total MSUs consumed.
- B.
There is no difference, they are the same
Correct Answer
A. The cost of a dev/test solution is constant, where the cost of other solutions depends on the total MSUs consumed.Explanation
A dev/test solution is different from other solutions because its cost remains constant regardless of the total MSUs consumed. In contrast, the cost of other solutions is dependent on the total MSUs consumed. This means that the cost of a dev/test solution is predictable and does not fluctuate based on usage, making it more suitable for development and testing purposes where consistent costs are desired.Rate this question:
-
- 9.
From the CAzE Session: What is the purpose of the “DEFAULT” solution in the TFP report?
- A.
There is no “default”, there is no need
- B.
When the “DEFAULT” solution is present in a TFP report, it’s an indicator to the user that there are LPARs not associated with a solution.
Correct Answer
B. When the “DEFAULT” solution is present in a TFP report, it’s an indicator to the user that there are LPARs not associated with a solution.Explanation
The presence of the "DEFAULT" solution in a TFP report indicates that there are LPARs (logical partitions) that are not associated with any specific solution. This means that these LPARs do not have a designated configuration or optimization plan. The "DEFAULT" solution serves as an indicator to the user that further attention may be needed to address these unassigned LPARs and ensure that they are properly configured and optimized.Rate this question:
-
- 10.
From the CAzE Session: How many solutions could an LPAR be associated with?
- A.
One
- B.
Two
- C.
None
- D.
Unlimited
Correct Answer
A. OneExplanation
An LPAR (Logical Partition) is a virtualized instance of a computer system, which allows multiple operating systems to run simultaneously on a single physical server. Each LPAR is isolated and has its own resources, such as CPU, memory, and storage. Therefore, an LPAR can only be associated with one solution at a time, as it is dedicated to running a specific operating system or workload.Rate this question:
-
- 11.
From the CAzE Session: How many dev/test solutions can be defined?
- A.
One
- B.
Two
- C.
None
- D.
Unlimited
Correct Answer
A. OneExplanation
Only one dev/test solution can be defined. This implies that there is a limitation on the number of dev/test solutions that can be created. The other options of two, none, and unlimited are incorrect as they suggest the possibility of having more than one dev/test solution, no dev/test solutions, or an unlimited number of dev/test solutions, respectively.Rate this question:
-
- 12.
From the CAzE Session: How many TFP configurations can you define?
- A.
One
- B.
Two
- C.
None
- D.
There is no restriction on the number of TFP configurations you can create.
Correct Answer
D. There is no restriction on the number of TFP configurations you can create.Explanation
The correct answer is that there is no restriction on the number of TFP configurations you can create. This means that you can define as many TFP configurations as you need or want. There are no limitations or constraints on the number of configurations that can be created, allowing for flexibility and customization based on individual needs and preferences.Rate this question:
-
- 13.
From the CAzE Session: What is the use case for creating multiple TFP configurations?
- A.
You can’t create multiple TFP configurations
- B.
For customers that are not yet on TFP, it gives them the ability to define an optional configure to maximize cost savings.
- C.
We did this because it was simple to accomplish
- D.
Option 4
Correct Answer
B. For customers that are not yet on TFP, it gives them the ability to define an optional configure to maximize cost savings.Explanation
Creating multiple TFP configurations is useful for customers who are not yet on TFP. It allows them to define an optional configuration that can help maximize cost savings. This feature is beneficial for customers who want to optimize their expenses and make the most out of TFP.Rate this question:
-
- 14.
From the BMC Ops Monitor for CICs Session: A JVM Endpoint is basically the access point for getting into a Java application?
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
A JVM Endpoint is indeed the access point for entering a Java application. It serves as a connection or interface through which external systems or users can interact with the Java application. It allows for communication, data exchange, and execution of commands or operations within the application. Therefore, the statement "A JVM Endpoint is basically the access point for getting into a Java application" is correct.Rate this question:
-
- 15.
A new CJVMEPT view has been created to display the basic attributes and state of a CICS JVMENDPOINTs
- A.
True
- B.
False
Correct Answer
A. TrueExplanation
The given statement is true. A new CJVMEPT view has indeed been created to display the basic attributes and state of a CICS JVMENDPOINTs. This view provides information about the attributes and current status of JVMENDPOINTs in a CICS region, allowing users to monitor and manage these endpoints effectively.Rate this question:
-
Quiz Review Timeline +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Sep 22, 2020Quiz Created by
MSM-SC-Mgr
Back to top