Mini Lathe Safety Test
-
You must have permission from the teacher before using this or any other machine in the classroom.
-
True
-
False
-
About This Quiz
Mini lathe safety test. . . Chinook Middle School
Instructor: Mr. Cox
Quiz Preview
- 2.
The spacers and lock nut should be put back on the mandrel at the end of each period.
-
True
-
False
Correct Answer
A. TrueExplanation
The spacers and lock nut should be put back on the mandrel at the end of each period. This means that after each period of use or after completing a task, the spacers and lock nut should be reattached to the mandrel. This is important for maintaining the proper functioning and stability of the mandrel and its components.Rate this question:
-
- 3.
Do you need to wear goggles while sanding or polishing your project on the mini-lathe
-
No because it is not dangerous
-
Yes, goggles must always be worn while operating a machine
-
You can descide for yourself if you want to or not
Correct Answer
A. Yes, goggles must always be worn while operating a machineExplanation
Wearing goggles while operating a machine, such as a mini-lathe, is important for safety reasons. Sanding or polishing projects can create fine particles or debris that can be harmful if they come into contact with the eyes. Goggles provide protection by preventing these particles from entering the eyes and causing potential injury or irritation. Therefore, it is necessary to wear goggles to ensure personal safety while using the machine.Rate this question:
-
- 4.
The machine should be stopped while making adjustments.
-
True
-
False
Correct Answer
A. TrueExplanation
It is important to stop the machine while making adjustments to ensure safety and prevent any accidents or injuries. Making adjustments while the machine is still running can be dangerous as it increases the risk of getting caught in moving parts or causing damage to the machine. Stopping the machine allows for a safer environment to make necessary adjustments.Rate this question:
-
- 5.
Always finish sand from a low grit number to a _____grit number.
Correct Answer
highExplanation
High grid number sandpaper i ssmoother than low numbers.Rate this question:
- 6.
Exotic hardwood blanks usually cost more than standard hardwoods.
-
True
-
False
Correct Answer
A. TrueExplanation
Exotic hardwoods are typically more expensive than standard hardwoods due to their rarity and unique characteristics. These woods are sourced from specific regions and have distinct grain patterns, colors, and durability. The limited availability and higher demand for exotic hardwoods contribute to their higher price. In contrast, standard hardwoods are more readily available and commonly used, making them more affordable. Therefore, the statement that exotic hardwood blanks usually cost more than standard hardwoods is true.Rate this question:
-
- 7.
The tool rest should removed for sanding and finishing operations .
-
True
-
False
Correct Answer
A. TrueExplanation
The tool rest should be removed for sanding and finishing operations because it can interfere with the smooth movement of the workpiece or the sanding/finishing tools. By removing the tool rest, there is more freedom of movement and flexibility to achieve the desired finish on the workpiece.Rate this question:
-
- 8.
Eye protection is not necessary during lathe operation.
-
True
-
False
Correct Answer
A. FalseExplanation
Eye protection is necessary during lathe operation to prevent any potential hazards such as flying debris, metal shavings, or sparks from causing injury to the eyes. Without proper eye protection, there is a risk of eye damage or blindness. Therefore, the correct answer is false, as eye protection is indeed necessary during lathe operation.Rate this question:
-
- 9.
The rags / paper towels used in finishing should be _______ in the red metal container..
Correct Answer
placed, put, thrown, storedExplanation
The rags/paper towels used in finishing should be placed, put, thrown, or stored in the red metal container.Rate this question:
- 10.
It is safe to feel the work smoothness while the work is turning.
-
True
-
False
Correct Answer
A. FalseExplanation
Feeling the work smoothness while it is turning is not safe. This is because if the work is smooth, there is a high chance that it could slip out of your hands or lose control, leading to accidents or injuries. It is important to ensure proper safety measures, such as using appropriate tools and equipment, to prevent any mishaps while working.Rate this question:
-
- 11.
Dull tools may be used safely.
-
True
-
False
Correct Answer
A. FalseExplanation
Dull tools are actually more dangerous to use than sharp tools. When a tool is dull, it requires more force to use, which increases the chances of slipping and causing an accident. Dull tools also tend to produce poor results and can damage the material being worked on. Therefore, it is not safe to use dull tools.Rate this question:
-
Quiz Review Timeline (Updated): Mar 22, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 22, 2023Quiz Edited by
ProProfs Editorial Team -
Sep 07, 2009Quiz Created by
Coxba
Back to top