Introduction To Lighting Design For Residential Interior Applications
Settings
-
+
Read careful the question and choose the correct option on each one. When you finish the evaluation, send the certificate to omar. [email protected] Com If you have any questions or troubles, send an e-mail to omar. [email protected] Com
- 1.What are the tree steps to a residential lighting plan?
- A.
A) Locating the light source, distance for the lighting, and type of room.
- B.
B) Type of lighting fixtures required, type of room, locating the light source.
- C.
C) Determine the lighting effects required room by room, type of lighting fixtures required, find out how to save energy dollars.
- 2.What are the 5 categories in the determinate the lighting effects required room by room in step 1?
- A.
A) General lighting, accent, wall washing, task lighting, covered lighting.
- B.
B) Height, room size, color, distance for the lighting, type of room.
- C.
C) General lighting, room size, task lighting, covered lighting, distance for the lighting.
- 3.In the step 2 what are the type of the lighting fixtures required?
- A.
A) Energy saving, recessed down light.
- B.
B) Recessed fluorescent, down light, emergency, track lighting, decorative fixtures, landscape lighting, wall wash.
- C.
C) Lights important rooms in the home, size, power, energy saving.
- 4.Lighting designer must do:
- A.
A) Select the new fixtures
- B.
B) Listen and understand the customer needs
- C.
C) Used the same function of lamps in all rooms.
- 5.What are the key factors to decide on the distribution of the light beam?
- A.
A) The voltage and type of lighting
- B.
B) Position and time of use of lighting.
- C.
C) The type of lamp to be used and the type selected lighting fixture where the lamp support
- 6.What are the factors that determine IESNA to decide how much light is necessary for good vision?
- A.
A) The age of the people who use the light, the precise use of lighting in the tasks to be performed and what is the surface reflectance of the area.
- B.
B) Lights important rooms in the home, size, power, energy saving
- C.
C) Type of lighting fixtures required, type of room, locating the light source
- 7.Some factor to decide which lamp is best?
- A.
A) Life/ dimension / brand
- B.
B) Consumed(watts) / beam spread / easily replaced
- C.
C) Application / mounting / cost.
- 8.Which are the different beams spread a lamp?
- A.
A) Medium, Narrow
- B.
B) Wide, Very Narrow
- C.
C) All option above
- 9.What is the distance recommend for suspend a chandelier (fixture)
- A.
A) 28 ̋ above table.
- B.
B) 32 ̋ above table.
- C.
C) 30 ̋ above table.
- 10.What is the distance for recessed wall washing?
- A.
A) About 3̒
- B.
B) About 2̒
- C.
C) About 4̒
Back to top