Gl365 Online Operations Training

18 Questions | Total Attempts: 406

SettingsSettingsSettings
Please wait...
Training Quizzes & Trivia

Your results may be sent to your area director, so please complete the training after clicking 'Start' below. Note: Please use the restaurant address on the login page.


Questions and Answers
  • 1. 
    • A. 

      I watched the video, now Start the certification.

    • B. 

      I have not watched the video.

  • 2. 
    When installing/removing the filter assemblies, you should...
    • A. 

      ...turn ON the exhaust fan and all cooking appliances and wait for them to heat up.

    • B. 

      ...turn OFF the exhaust fan and all cooking appliances and wait for them to cool down.

    • C. 

      ...stand on hot cooking equipment.

    • D. 

      ...flip the filter over.

  • 3. 
    True or False: The disposable filter media replaces the need to ever clean the front metal cover and the metal filter behind the media.
    • A. 

      True

    • B. 

      False

  • 4. 
    The disposable filter media will begin to show signs of grease accumulation shortly after installation. Knowing that, the disposable filter media will need to be replaced...
    • A. 

      Every day

    • B. 

      When the color of the filter media becomes distinguishably darker across the entire filter face.

    • C. 

      Every week

    • D. 

      Every month

  • 5. 
    Once the disposable filter media has become soiled and fully saturated with grease...
    • A. 

      Wash the filter and reuse

    • B. 

      Move the filter to a lower volume area of the hood

    • C. 

      Dispose of the filter with your normal trash

    • D. 

      Place the filter in the liquid grease collection dumpster

  • 6. 
    After a disposable filter media has been installed and has begun to collect grease, reversing the direction of the disposable filter media (flipping it over) will...
    • A. 

      Pull the grease out of the filter, depositing it into the kitchen exhaust system.

    • B. 

      Increase the frequency of required kitchen cleanings.

    • C. 

      Both 'A' and 'B'

    • D. 

      None of the above

  • 7. 
    Once installed, the disposable filter media will replace the need to ever clean your kitchen exhaust hood canopy and backwall.
    • A. 

      True

    • B. 

      False

    • C. 

      Sometimes true

    • D. 

      Depends on the equipment

  • 8. 
    The disposable filter media will reduce the need to clean the metal filter assembly. After the disposable filter media is installed, you should inspect and clean your metal filter assemblies every...
    • A. 

      Week

    • B. 

      Month

    • C. 

      3 months

    • D. 

      There is no set schedule for metal filter assembly inspections, however it is still important to periodically inspect and clean the metal filter assembly at least 1x per month. Over heavy grease producing areas, this should be performed at least 2x per month.

  • 9. 
    You should re-order another case of disposable filter media...
    • A. 

      ...after you have used the last filter in the case.

    • B. 

      ...prior to opening the last case of filters to prevent the need for rushed shipping charges.

  • 10. 
    If you ever experience smoke issues, you can easily fix the problem by...
    • A. 

      ...leaving the fully soiled filter media in place.

    • B. 

      ...replace the disposable filter media in the filter assemblies that have the most grease accumulation.

    • C. 

      ...remove the entire filter assembly from the hood and allow grease to enter the exhaust system.

    • D. 

      ...remove the front cover and filter media, but leave the metal assembly in place.

  • 11. 
    What are approved ways to wash the metal components of the filter assemblies? 
    • A. 

      In a degreaser soak tank.

    • B. 

      One at a time in the dishwasher.

    • C. 

      Spray and scrub them in the sink.

    • D. 

      Soak them in the sink with degreaser.

    • E. 

      All of the above.

  • 12. 
    True or False: The horizontal handle on the front cover should be used when removing the entire filter assembly from the hood?
    • A. 

      True - Since the handle is easy to grab.

    • B. 

      False - If the front cover separates from the assembly, the rest of the assembly could fall onto cooking appliances.

  • 13. 
    True or False: You should wipe down the inside of the hood canopy, the back wall behind the cooking appliances, and metal covers of the filter assemblies every night.
    • A. 

      True

    • B. 

      False

  • 14. 
    True or False: You can clean and replace the front covers without having to replace the disposable filter media.
    • A. 

      True

    • B. 

      False

  • 15. 
    Drip cups at the end of the exhaust hood...
    • A. 

      ...might fill up more frequently, so check them every night.

    • B. 

      ...are no longer needed.

  • 16. 
    Gaps between filter assemblies, even if small, or at the ends of the exhaust hood can cause... 
    • A. 

      ...grease to bypass the filters.

    • B. 

      ...premature hood cleanings.

    • C. 

      ...additional costs to your grease management practices.

    • D. 

      All of the above.

  • 17. 
    Please Click and Print the items below before proceeding:
    • Filter Change Visual
    • FAQ Sheet
    • Operators Manual
    These will help you, your staff and local authorities answer any additional questions.
    • A. 

      I have printed all documents...Submit my test!

    • B. 

      I choose not to print the above documents.

Back to Top Back to top