Driver's Training Rules and Right-of-Way Quiz

In construction zones, trucks are typically moving slowly due to the need for caution and safety, and they are usually large in size to accommodate carrying heavy materials and equipment.

When a traffic signal isn't working, the intersection should be treated as uncontrolled, not open or controlled. Drivers should exercise caution and follow right-of-way rules.

When making a right turn, you should start your turn from the lane closest to the curb and end in the lane closest to the curb, not the farthest right lane.

Right of way laws are indeed set to determine which party must yield or give up the right of way in a given situation. The rules help in promoting safety and reducing the likelihood of accidents on the road.

Being alert as a driver and scanning the road ahead allows the driver to anticipate potential obstacles or dangers, giving them more time to react and avoid sudden braking or swerving, thus reducing the risk of accidents.

Wet roads reduce the traction between the tires and the road surface, making it unsafe to make fast turns due to increased risk of skidding or losing control of the vehicle.

Side-view mirrors can be adjusted to reduce blind spots by ensuring a wider field of vision on the sides of the vehicle, while rear-view, center-view, and top-view mirrors do not directly address blind spots in the same way.

When there is a green arrow pointing to the left, it indicates that you can make a left turn after yielding to other traffic and pedestrians. This ensures that you can safely make your turn without interfering with oncoming traffic or pedestrians.

When making a right turn at an intersection from a stop, it is important to look left, right, and then left again to ensure there are no oncoming vehicles, pedestrians, or obstacles that could interfere with the turn.

When the signal light changes to yellow, the driver should make every reasonable effort to stop safely, avoiding abrupt stops that can lead to rear-end collisions, stopping quickly might result in skidding or losing control of the vehicle, and stopping carelessly may lead to accidents with other vehicles or pedestrians.

In the United States, a no passing zone is indeed usually marked with a yellow pennant shaped sign. This sign indicates that passing is not allowed in the designated area for safety reasons.

When turning right from a one way street, it is important to position your car in the right lane to ensure a safe and smooth turn.

When the signal light is red, you must yield to pedestrians and traffic in your path of travel to ensure safety and avoid accidents.

When turning left onto a two-way street, the last check should be to the left to ensure that there are no oncoming vehicles or pedestrians that may be in the way.

When parking uphill with a curb, always turn your front wheels away from the curb. This will prevent your car from rolling into traffic if the parking brake fails.

When entering a car from the street side, it is important to stand at the front of the vehicle to see approaching traffic from the direction you will be moving towards.

When the exit ramp is blocked with traffic, it is safest to continue to the next exit rather than attempting risky maneuvers or causing further congestion.

When driving on a two-lane highway, it is essential to make a decision regarding passing or not passing the car ahead just prior to reaching it. This decision ensures safe and efficient maneuvering on the road.

When approaching an oncoming car on a dimly lit street, it is important to dim your headlights to avoid blinding the other driver. This should be done when you are within 500 feet of the oncoming car. Lowering the high beams, turning off the headlights, or brightening the taillights are not appropriate actions in this scenario.

When your car starts to lose traction on the roadway, one should avoid speeding up or applying the brakes suddenly as it can further worsen the loss of control. It is better to steer in the direction you want to go and gently apply the brakes if necessary.

When driving past parked vehicles on the left, it is recommended to position your vehicle at least one vehicle door width away to ensure a safe distance and avoid any potential collisions or accidents.

The standard speed limit in a residential area is 25 mph unless otherwise posted. This speed limit is set to ensure the safety of pedestrians and residents in the neighborhood.

The correct term for this display of emotions is 'road rage,' which refers to aggressive or violent behavior exhibited by a driver in response to a traffic incident.

Traffic signs serve the purpose of guiding drivers, regulating traffic flow, and warning about potential hazards or changes in road conditions.

The statement is true because having the right of way means that other drivers are required to yield to you in certain situations. It's a rule of the road that helps maintain traffic flow and prevent accidents.

Looking towards the center of the road when facing glare from oncoming high beam headlights may actually increase glare and make it harder to see. The correct action to take is to look slightly to the right side of the road and use the right edge line as a guide while avoiding direct eye contact with the oncoming lights.

Large trucks have multiple blind spots due to their size and height, making it challenging for drivers to see vehicles on the sides and rear. This is a common safety concern that drivers need to be aware of to prevent accidents.

When a school bus is stopped on your side of the road with its red flashing lights on, you are required by law to stop until the lights stop flashing to ensure the safety of children boarding or getting off the bus.

Before attempting a U-turn, it is important to first determine if it is legal to do so to ensure safety and adherence to traffic laws.

Driving off the road to pass another vehicle is not allowed under any circumstances according to traffic laws.