Understanding Mechanical Waves and Sound: Properties and Types

Reflection specifically refers to the change in direction of a wavefront at an interface between two different media, not to be confused with refraction, diffraction, or interference.

Refraction specifically refers to the bending of waves due to a change in speed when passing through different mediums, unlike reflection, absorption, or diffraction.

Transverse waves are characterized by causing the medium to vibrate perpendicular to the direction of wave travel. This is in contrast to longitudinal waves where the medium vibrates parallel to the direction of wave travel.

A trough is the opposite of a hill or mountain, as it represents the lowest point of a medium below the rest position.

A standing (stationary) wave is characterized by points along the medium that do not move, hence the term 'stationary'. The amplitude at these points remains constant, unlike waves that propagate with varying amplitudes.

Surface waves involve a different type of motion of particles in the medium compared to longitudinal and transverse waves. They are not limited to a specific medium like air or liquids but can occur in various mediums.

Periodic motion is defined by its repeating pattern over time, distinguishing it from random or irregular motions.

A period, in this context, refers to the time it takes for a vibration cycle to repeat itself at a given point.

Hertz is specifically used to measure frequency, indicating the number of cycles per second.

When a source of energy causes a vibration to propagate through a medium, a mechanical wave is created as the disturbance travels through the medium.

The frequency of a wave is directly linked to the frequency of the vibrating source that produces it. This relationship determines the pitch of the sound produced.

In physics, a medium refers to a substance that allows the transfer of energy, typically through waves. Solids, liquids, and gases can all act as mediums for energy transfer.

A Periodic Wave refers to a motion that repeats at regular intervals, similar to simple harmonic motion. It is not specifically related to ocean waves, electromagnetic radiation, or sudden bursts of energy.

Wavelength specifically refers to the distance between peaks of a wave, unlike amplitude which is the height of the wave, the time period which is the time for one complete cycle, or the energy carried which is not directly related to the physical distance of the wave.

The correct equation to calculate the speed of waves is v = f * λ, where v represents velocity, f is frequency, and λ is wavelength. This equation is derived from the basic concept that speed equals frequency times wavelength.

Amplitude refers to the maximum extent or displacement of a vibration or oscillation, while frequency refers to the number of oscillations per unit of time. The speed of sound in a medium and the distance between two nodes in a standing wave are not definitions of amplitude.

Diffraction refers to the bending of waves around obstacles, not their absorption, amplification, or reflection.

Interference specifically refers to the effect caused by the overlapping of waves, rather than other phenomena such as absorption, deflection, or reflection.

Constructive interference occurs when waves align in phase, reinforcing each other and resulting in an increase in overall amplitude.

In physics, crest (peak) refers to the highest point the medium rises to from the rest position. It is commonly used when discussing waves.

The rest position in a wave diagram represents the equilibrium point where the wave would be if there were no disturbances. It is not the point of maximum amplitude, the starting point of the wave, or the point of minimum frequency.

Longitudinal waves are characterized by oscillating back and forth along the same axis as the wave propagates, unlike transverse waves that oscillate perpendicular to the direction of propagation. Sound waves are a common example of longitudinal waves.

Compression, in the context of waves, refers to an area where the particles in a medium are spaced close together. This definition is specific to the science of waves and not related to file compression or physical squeezing.

Frequency refers to the number of crests of a wave passing a point in a given time period, not the speed, amplitude, or wavelength of the wave.

The amplitude of a wave is directly proportional to the energy it carries. Therefore, as the energy of a wave increases, so does its amplitude.

Mechanical waves require a medium to travel through, unlike electromagnetic waves such as light or sound waves.

Rarefaction is the opposite of compression in a wave, where particles are spread out instead of being close together.

Mechanical waves refer to waves that require a medium to travel through, such as air or water. Sound, light, and electromagnetic waves are not examples of mechanical waves as they do not require a medium to propagate.

When the frequency of a wave is increased, the number of wave cycles that pass a fixed point in a given time increases. As a result, the wavelength (the distance between two corresponding points on a wave) decreases.