Construction Safety Quiz On Vehicles Equipment And Marine
-
Can equipment be parked near live traffic at night if it is equipped with reflective devices?
-
Yes
-
No
-
Construction safety means supervision of work and protecting the employees from any hazards or accidents inside and outside. This quiz has been designed to test the knowledge of employees on safety pertaining to vehicles, equipment, and marine operations. Take this quiz to test your safety knowledge related to the operation of vehicles, equipment usage and Marine functions. So, let's try See moreout the quiz. All the best!
Quiz Preview
- 2.
Is it required to have the parking brake set on all equipment when parked?
-
Yes
-
No
Correct Answer
A. YesExplanation
It is necessary to set the parking brake on all equipment when parked to ensure that it remains stationary and does not roll or move unintentionally. This is particularly important for safety reasons, as it prevents accidents or injuries that could occur if the equipment were to unexpectedly start moving. Additionally, setting the parking brake can also help in preserving the condition and longevity of the equipment by reducing wear and tear on the transmission and other components.Rate this question:
-
- 3.
What 2 conditions allow for use of a vehicle with an obstructed rear view? Mark 2.
-
Knowing the path behind you
-
Back up Alarms
-
Spotters with signals
-
If you think there is no traffic
Correct Answer(s)
A. Back up Alarms
A. Spotters with signalsExplanation
The correct answer is "Back up Alarms" and "Spotters with signals". These two conditions allow for the use of a vehicle with an obstructed rear view. Back up alarms can alert others to the presence of the vehicle, compensating for the limited visibility. Spotters with signals can provide guidance and communicate with the driver to ensure safe maneuvering in the absence of a clear rear view.Rate this question:
-
- 4.
Do tools and materials need to be secured in your vehicle?
-
Yes
-
Not if traveling a short distance
-
No
Correct Answer
A. YesExplanation
Tools and materials should be secured in a vehicle to ensure the safety of both the driver and other passengers. Unsecured items can become projectiles in the event of sudden braking or a collision, potentially causing injury or damage. Additionally, securing tools and materials prevents them from shifting or falling during transit, reducing the risk of accidents or damage to the vehicle. Therefore, it is important to secure tools and materials in a vehicle, regardless of the distance of travel.Rate this question:
-
- 5.
Are seat belts required on job sites?
-
Yes
-
No
Correct Answer
A. YesExplanation
Seat belts are required on job sites for the safety of workers. They help to prevent injuries and fatalities in the event of accidents or sudden stops. Wearing seat belts ensures that workers are securely restrained and reduces the risk of being ejected from vehicles or equipment. It is a standard safety practice to enforce the use of seat belts on job sites to protect workers from potential hazards and maintain a safe working environment.Rate this question:
-
- 6.
How far must vehicles park away from equipment?
-
3 feet
-
7 feet
-
200 feet
-
19 feet
Correct Answer
A. 200 feetExplanation
Vehicles must park 200 feet away from equipment. This distance is necessary to ensure the safety of both the equipment and the vehicles. Parking too close to equipment can pose a risk of damage or accidents, especially if the equipment is large or in operation. By maintaining a significant distance, vehicles can avoid any potential hazards or interference with the equipment's operation.Rate this question:
-
- 7.
What is needed in order to modify equipment for a job?
-
Someones help
-
Supervisor's Permission
-
Written approval from manufacture
-
You can't modify equipment
Correct Answer
A. Written approval from manufactureExplanation
In order to modify equipment for a job, it is necessary to obtain written approval from the manufacturer. This is because the manufacturer holds the expertise and knowledge about the equipment and its specifications. They need to provide their consent and guidelines for any modifications to ensure that the equipment remains safe and functions properly. This written approval serves as a legal document that authorizes the modification and protects both the equipment user and the manufacturer from any liabilities or damages that may arise from the modification.Rate this question:
-
- 8.
Are steering knobs allowed for equipment such as tractors and loaders?
-
Yes
-
No
Correct Answer
A. NoExplanation
Steering knobs are not allowed for equipment such as tractors and loaders. This is because these knobs can impair the driver's ability to steer the vehicle properly and safely. The use of steering knobs may also violate safety regulations and increase the risk of accidents. Therefore, it is not allowed to use steering knobs on tractors and loaders.Rate this question:
-
- 9.
When clearing a site, why would an employee want to wear protective clothing and protective PPE?
-
Debris
-
Toxic plants
-
Possible chemicals
-
All of the above
Correct Answer
A. All of the aboveExplanation
When clearing a site, an employee would want to wear protective clothing and protective PPE because there may be debris present that could cause injury or harm. Additionally, there may be toxic plants that could cause skin irritation or other health issues. Furthermore, there could be possible chemicals on the site that could be hazardous if they come into contact with the employee's skin or eyes. Therefore, wearing protective clothing and PPE would help to minimize the risk of injury or exposure to harmful substances.Rate this question:
-
- 10.
What is a bulwark?
-
The line painted on the deck of a boat to signify the 6' mark
-
The side of a ship above the upper deck
-
A marine ladder of rope or chain with wooden rungs
-
A hatch opening to a barge
Correct Answer
A. The side of a ship above the upper deckExplanation
A bulwark refers to the side of a ship above the upper deck. It is a protective barrier or wall that provides additional safety and security to the ship and its crew. The bulwark acts as a boundary, preventing people and objects from falling overboard and also helps to shield the ship from waves and other external elements. It is an important feature of a ship's structure and contributes to its overall stability and functionality.Rate this question:
-
Quiz Review Timeline (Updated): Mar 21, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 21, 2023Quiz Edited by
ProProfs Editorial Team -
Dec 22, 2008Quiz Created by
Kiewitsafe
Back to top