A+ Essentials Printer Quiz
-
The surface on which the picture of the page is drawn with an electromagnetic charge is the _________.
This is just focusing on printers and how the laser print process works.
(152).jpg "A+ Essentials Printer Quiz - Quiz")
Quiz Preview
- 2.
During which step of the printing process do temperatures reach 350 degrees Fahrenheit?
Explanation
During the fusing step of the printing process, temperatures reach 350 degrees Fahrenheit. Fusing is the process of melting the toner onto the paper to create a permanent image. This high temperature is necessary to ensure that the toner adheres properly to the paper and produces a sharp and durable print.Rate this question:
- 3.
True/False. Inkjet printers, also known as ink dispersion printing technology, produce images by forcing ink through tiny nozzles and onto the paper.
-
True
-
False
Correct Answer
A. TrueExplanation
Inkjet printers use ink dispersion printing technology to produce images by forcing ink through tiny nozzles and onto the paper. This is done through a process called thermal inkjet technology, where heat is used to create tiny bubbles that propel the ink onto the paper. This method allows for precise and detailed printing, making it a popular choice for home and office use.Rate this question:
-
- 4.
What should you do once you install and configure your laser printer?
Correct Answer
print a test page
test pageExplanation
Once you have installed and configured your laser printer, it is recommended to print a test page. This is done to ensure that the printer is functioning properly and that the installation and configuration processes were successful. The test page allows you to check the print quality, alignment, and any potential issues with the printer. It also serves as a way to verify that the printer is connected to the correct network or computer. By printing a test page, you can identify and troubleshoot any problems before proceeding to print actual documents.Rate this question:
- 5.
Most laer printers hae two or more connection interfaces. These include:
-
Parallel
-
IEEE 1394 wired or wireless Ethernet network connections
-
USB
-
All of the aboe
Correct Answer
A. All of the aboeExplanation
The correct answer is "all of the above." This means that all of the connection interfaces mentioned in the question (Parallel, IEEE 1394, wired or wireless Ethernet network connections, and USB) are present in most laser printers. This suggests that laser printers are equipped with multiple options for connecting to different devices or networks, providing flexibility and convenience for users.Rate this question:
-
- 6.
Why are dot matrix printers still in use today?
-
They are quiet
-
They are often used strictly for data processing applications
-
They are useful for printing multipart forms
-
All of the above
Correct Answer
A. They are useful for printing multipart formsExplanation
Dot matrix printers are still in use today because they are useful for printing multipart forms. Unlike other printers, dot matrix printers can create multiple copies of a document simultaneously by using impact printing technology. This makes them ideal for applications where multiple copies of a document are required, such as invoices, receipts, or purchase orders. Additionally, dot matrix printers are often used in environments where noise levels need to be minimized, as they are quieter compared to other types of printers.Rate this question:
-
- 7.
The primary corona applies a –600V charge to the drum during which step of the printing process
-
Charging
-
Writing
-
Developing
-
Transferring
Correct Answer
A. ChargingExplanation
The primary corona applies a -600V charge to the drum during the charging step of the printing process.Rate this question:
-
- 8.
How many distinct print steps are there in the laser printing process?
-
3
-
4
-
5
-
6
Correct Answer
A. 6Explanation
There are six distinct print steps in the laser printing process. This means that there are six different stages involved in the process of laser printing, from the initial preparation of the document to the final output on paper. Each step plays a crucial role in ensuring that the printing is accurate and of high quality.Rate this question:
-
- 9.
A continuous mark on your printed pages is usually the result of ______________?
-
Toner streaks
-
HVPS problem
-
Scratched drum
-
Dirty rollers
Correct Answer
A. Scratched drumExplanation
A continuous mark on printed pages is usually the result of a scratched drum. The drum is an essential part of the printer that transfers toner onto the paper. If the drum is scratched, it can cause irregularities in the toner distribution, leading to a continuous mark on the pages. This issue can be resolved by replacing the scratched drum with a new one.Rate this question:
-
- 10.
If your laser printer is printing entirely black pages, what is the problem?
-
The fuser assembly is overheating
-
Faulty toner cartridge
-
Drum is not being charged
-
The high voltage power supply is faulty
Correct Answer
A. Drum is not being chargedExplanation
If your laser printer is printing entirely black pages, the problem is likely that the drum is not being charged. The drum is responsible for transferring the toner onto the paper during the printing process. If the drum is not properly charged, it will not attract the toner, resulting in blank or entirely black pages. This issue can be caused by a malfunctioning charging mechanism or a worn-out drum.Rate this question:
-
- 11.
If nothing prints on your inkjet printer, first ensure the jobs are getting to the print queue in Windows. If the jobs are listed, which of the following are reason you might not get any output when you try to print?
-
Printer is not turned on
-
Printer isn't connected via the interface cable
-
Ink cartridges are empty or clogged
-
Printer isn't configured for the correct interface
Correct Answer(s)
A. Printer is not turned on
A. Printer isn't connected via the interface cable
A. Ink cartridges are empty or clogged
A. Printer isn't configured for the correct interfaceExplanation
The given answer states that if nothing prints on the inkjet printer, it could be due to multiple reasons. The printer may not be turned on, the printer may not be connected via the interface cable, the ink cartridges may be empty or clogged, or the printer may not be configured for the correct interface. These factors can prevent any output from being produced when attempting to print.Rate this question:
-
- 12.
Some sources place the cleaning step at the beginning of the process and others place it at the end. Either way, what is accomplished in this step?
-
A rubber blade clears the excess toner from the drum
-
A roller or corona wire removes the charges from the drum
-
The fuser assembly clears excess toner from the rollers
Correct Answer(s)
A. A rubber blade clears the excess toner from the drum
A. A roller or corona wire removes the charges from the drumExplanation
In the cleaning step of the process, two tasks are accomplished. Firstly, a rubber blade is used to clear the excess toner from the drum. This ensures that only the required amount of toner is transferred to the paper during printing. Secondly, a roller or corona wire is used to remove the charges from the drum. This is important because the drum needs to be neutralized before it can be recharged for the next printing cycle. Both of these tasks are essential for maintaining the quality and efficiency of the printing process.Rate this question:
-
Quiz Review Timeline (Updated): Mar 22, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 22, 2023Quiz Edited by
ProProfs Editorial Team -
Nov 11, 2008Quiz Created by
Sherry9300
Back to top