G12 Quiz 2 Cathode Rays
-
The diagram below shows the screen of a cathode-ray oscilloscope tube.The tube is placed between a pair of charged plates.Which diagram shows the new position of the spot?
-
A
-
B
-
G12 Quiz 2 on Cathode Rays explores the fundamentals of electron dynamics in cathode-ray tubes. It assesses understanding of electron emission, charge dynamics, and the behavior of electrons in electric fields, crucial for students in advanced physics courses.
Quiz Preview
- 2.
The figure shows a type of tube in which cathode rays can be produced.What occupies the remaining space in the tube?
-
Air
-
Alpha particles
-
Hydrogen
-
Vacuum
Correct Answer
A. VacuumExplanation
The figure shows a type of tube in which cathode rays can be produced. In order for cathode rays to be produced, the tube must be evacuated of all air particles. This creates a vacuum inside the tube, meaning that there is no air or any other particles occupying the remaining space. Therefore, the correct answer is Vacuum.Rate this question:
-
- 3.
A beam of cathode rays is entering the space between two charged metal plates.What sort of particles make up cathode rays?
-
Alpha particles
-
Electrons
-
Neutrons
-
Protons
Correct Answer
A. ElectronsExplanation
Cathode rays are composed of electrons. This is because cathode rays are produced when a high voltage is applied across a cathode and an anode in a vacuum tube, causing electrons to be emitted from the cathode. These electrons then travel in a straight line towards the anode, forming the cathode rays. Therefore, the correct answer is electrons.Rate this question:
-
- 4.
Charged particles are emitted from the cathode of an oscilloscope.What is the name and the charge of these particles?
-
A
-
B
-
C
-
D
Correct Answer
A. AExplanation
Charged particles emitted from the cathode of an oscilloscope are called electrons. Electrons have a negative charge.Rate this question:
-
- 5.
The diagram shows a simple cathode-ray tube.Which part emits the electrons?
-
A
-
B
-
C
-
D
Correct Answer
A. BExplanation
In a cathode-ray tube, the part that emits the electrons is the cathode. The cathode is negatively charged and when a voltage is applied, it releases a stream of electrons. These electrons are then accelerated towards the anode, creating a beam of electrons that can be manipulated to create images on the screen. Therefore, option B is the correct answer as it represents the cathode in the diagram.Rate this question:
-
- 6.
In order to produce a beam of cathode rays, a heated filament is placed near to anWhat is the type of charge on the anode and why is this charge chosen?
-
A
-
B
-
C
-
D
Correct Answer
A. CExplanation
The type of charge on the anode is positive. This charge is chosen because cathode rays are negatively charged particles, so they are attracted to the positively charged anode.Rate this question:
-
- 7.
The diagram shows a cathode-ray tube.A student wants the cathode rays to make a spot at P on the screen.Which parts of the cathode-ray tube should be positive?
-
Anode and top Y plate
-
Anode and bottom Y plate
-
Cathode and top Y plate
-
Cathode and bottom Y plate
Correct Answer
A. Anode and top Y plateExplanation
In a cathode-ray tube, the cathode emits electrons which are accelerated towards the anode due to the potential difference between them. The anode is positively charged, attracting the negatively charged electrons. The electrons then pass through the deflection plates, which are perpendicular to each other. The purpose of the deflection plates is to control the path of the electrons and make them hit a specific spot on the screen. In this case, the student wants the spot at point P on the screen. To achieve this, the top Y plate should be positive, as it will repel the electrons upwards, and the anode should also be positive, as it will attract the electrons towards it.Rate this question:
-
- 8.
A cathode-ray beam passes through an electric field between charged parallelplates.In which direction is the beam deflected?
-
Towards the negative plate
-
Towards the positive plate
-
Into the page
-
Out of the page
Correct Answer
A. Towards the positive plateExplanation
The cathode-ray beam is deflected towards the positive plate because the beam consists of negatively charged particles (electrons). When the beam passes through the electric field between the charged parallel plates, the positive plate attracts the negatively charged electrons, causing them to move towards it. Therefore, the beam is deflected towards the positive plate.Rate this question:
-
- 9.
The figure shows a type of tube in which cathode rays can be produced.A potential difference (p.d.) is connected between two terminal in order to cause thermionic emission. Between which two of the four labelled terminals is the p.d. connected?
-
Between A and B
-
Between A and D
-
Between B and D
-
Between C and D
Correct Answer
A. Between C and DExplanation
The correct answer is between C and D. This is because in a cathode ray tube, the cathode (negative electrode) is connected to terminal D, and the anode (positive electrode) is connected to terminal C. The potential difference (p.d.) is applied between the cathode and the anode to create an electric field that accelerates the cathode rays towards the anode. Therefore, the p.d. is connected between terminals C and D.Rate this question:
-
- 10.
A cathode-ray tube has an anode and an earthed cathode.Which line in the table shows the charge and the temperature of the anode?A
-
A
-
B
-
C
-
D
Correct Answer
A. CExplanation
The line in the table that shows the charge and the temperature of the anode is C.Rate this question:
-
Quiz Review Timeline (Updated): Mar 20, 2023 +
Our quizzes are rigorously reviewed, monitored and continuously updated by our expert board to maintain accuracy, relevance, and timeliness.
-
Current Version
-
Mar 20, 2023Quiz Edited by
ProProfs Editorial Team -
Nov 10, 2014Quiz Created by
Incivilis
Back to top